Assessment of the energy efficiency estimation methods on induction motors considering real-time monitoring

Abstract Different methods have been developed to estimate the energy efficiency of induction motors. The accuracy of these methods vary with the load factor, the unbalanced voltage (UV) and harmonics. The feasibility of these methods for efficiency estimation in real-time were theoretically and experimentally assessed during the operation under different operational conditions (i.e. balanced sinusoidal voltage (BSV), harmonics, UV and harmonics with UV). Results show that for load factors over 80%, the air-gap method is applicable under any condition, while the slip method is only applicable under BSV or balanced harmonic voltage. Moreover, for load factors over 40%, the nameplate method is applicable under BSV. Other methods result in errors over 8% and optimization methods are not applicable for real-time monitoring. Electric systems generally operates with some degree of UV and harmonics, while induction motors mostly operate with load factors below 60%, limiting the use of these methods for real-time measurement.

[1]  C. Verucchi,et al.  Efficiency Measurements in Induction Motors: Comparison of Standards , 2015, IEEE Latin America Transactions.

[2]  Vladimir Sousa Santos,et al.  Bacterial foraging algorithm application for induction motor field efficiency estimation under unbalanced voltages , 2013 .

[3]  Antonio R. Donadon,et al.  A stator flux synthesis approach for torque estimation of induction motors using a modified stator resistance considering the losses effect , 2013, 2013 International Electric Machines & Drives Conference.

[4]  Maria Carmela Di Piazza,et al.  Techniques for efficiency improvement in PWM motor drives , 2016 .

[5]  T.G. Habetler,et al.  A Nonintrusive and In-Service Motor Efficiency Estimation Method using Air-Gap Torque with Considerations of Condition Monitoring , 2006, Conference Record of the 2006 IEEE Industry Applications Conference Forty-First IAS Annual Meeting.

[6]  Math Bollen,et al.  Power quality issues in the electric power system of the future , 2016 .

[7]  Antonio J. Marques Cardoso,et al.  Influence of the positive sequence voltage on the derating of three-phase induction motors under voltage unbalance , 2013, 2013 International Electric Machines & Drives Conference.

[8]  I. Elamvazuthi,et al.  Electrical power consumption monitoring using a real-time system , 2012, 2012 IEEE Conference on Sustainable Utilization and Development in Engineering and Technology (STUDENT).

[9]  Ondrej Krejcar,et al.  Real Time Voltage and Current Phase Shift Analyzer for Power Saving Applications , 2012, Sensors.

[10]  J.R. Gomez,et al.  Estimation of induction motor efficiency in-situ under unbalanced voltages using genetic algorithms , 2008, 2008 18th International Conference on Electrical Machines.

[11]  Pragasen Pillay,et al.  A novel in situ efficiency estimation algorithm for three-phase induction motors operating with distorted unbalanced voltages , 2016, 2016 IEEE Energy Conversion Congress and Exposition (ECCE).

[12]  Nasrullah Khan,et al.  Review of harmonic analysis, modeling and mitigation techniques , 2017 .

[13]  Bharat Singh,et al.  Efficiency determination of in-service induction machines using gravitational search optimization , 2018 .

[14]  Paul S. Barendse,et al.  Considerations for Nonintrusive Efficiency Estimation of Inverter-Fed Induction Motors , 2016, IEEE Transactions on Industrial Electronics.

[15]  William Et.Al Hines,et al.  Probability and Statistics in Engineering , 2003 .

[16]  Vladimir Sousa,et al.  Estimating induction motor efficiency under no-controlled conditions in the presences of unbalanced and harmonics voltages , 2015, 2015 CHILEAN Conference on Electrical, Electronics Engineering, Information and Communication Technologies (CHILECON).

[17]  Bin Lu,et al.  Online and nonintrusive continuous motor energy and condition monitoring in process industries , 2008, Conference Record of 2008 54th Annual Pulp and Paper Industry Technical Conference.

[18]  Milan Milinkovic,et al.  Improved Stator Flux Estimator for Speed Sensorless Induction Motor Drives , 2015, IEEE Transactions on Power Electronics.

[19]  Lane Maria Rabelo Baccarini,et al.  A simple torque estimator for in-service efficiency determination of induction motors , 2017, 2017 IEEE Industry Applications Society Annual Meeting.

[20]  Pragasen Pillay,et al.  Simple and Accurate Algorithm for Small- and Medium-Sized Three-Phase IM Efficiency Estimation Based on No-Load Tests , 2018, IEEE Transactions on Industry Applications.

[21]  P. Pillay,et al.  An In Situ Efficiency Estimation Technique for Induction Machines Working With Unbalanced Supplies , 2012, IEEE Transactions on Energy Conversion.

[22]  Thomas A. Lipo,et al.  Measurement and computation of starting torque pulsations of salient pole synchronous motors , 1990 .

[23]  M. Savino,et al.  A New Test Method For Determination Of Induction Motor Efficiency , 1984, IEEE Transactions on Power Apparatus and Systems.

[24]  B. S. Rajpurohit,et al.  Comparison of efficiencies of in situ induction motor in unbalanced field conditions , 2015, 2015 International Conference on Power and Advanced Control Engineering (ICPACE).

[25]  Leon M. Tolbert,et al.  Comparison of induction motor field efficiency evaluation methods , 1996, IAS '96. Conference Record of the 1996 IEEE Industry Applications Conference Thirty-First IAS Annual Meeting.

[26]  L L L M R Baccarini,et al.  Simple robust estimation of load torque in induction machines for application in real plants , 2018 .

[27]  Germano Lambert-Torres,et al.  Comparison among Methods for Induction Motor Low-Intrusive Efficiency Evaluation Including a New AGT Approach with a Modified Stator Resistance , 2018 .

[28]  Wei-Jen Lee,et al.  Effects of nonsinusoidal voltage on the operation performance of a three-phase induction motor , 1999 .

[29]  Vladimir Sousa Santos,et al.  Electricity management in the production of lead-acid batteries: The industrial case of a production plant in Colombia , 2018, Journal of Cleaner Production.

[30]  Nasrudin Abd Rahim,et al.  Energy savings and emissions reductions for rewinding and replacement of industrial motor , 2011 .

[31]  Rahman Saidur,et al.  A review on electrical motors energy use and energy savings , 2010 .

[32]  D. A. Andrade,et al.  A method for real-time wireless monitoring of the efficiency and conditions of three-phase induction motor operation , 2018 .

[33]  V. Beldjajev,et al.  Harmonic losses in induction motors caused by voltage waveform distortions , 2010, Proceedings of the 2010 Electric Power Quality and Supply Reliability Conference.

[34]  Thomas G. Habetler,et al.  A Nonintrusive Efficiency Estimation Method for In-Service Motor Testing using a Modified Induction Motor Equivalent Circuit , 2006 .

[35]  Paul Waide,et al.  Energy-Efficiency Policy Opportunities for Electric Motor-Driven Systems , 2011 .

[36]  J. S. Edmonds,et al.  Derivation of Induction Motor Models from Standstill Frequency Response Tests , 1989, IEEE Power Engineering Review.

[37]  M. A. Khan,et al.  Considerations for improving the non-intrusive efficiency estimation of induction machines using the air gap torque method , 2011, 2011 IEEE International Electric Machines & Drives Conference (IEMDC).

[38]  U. V. Anbazhagu,et al.  A Proficient Approach for Monitoring Induction Motor by Integrating Embedded System with Wireless Sensor Network , 2014 .

[39]  Hedio Tatizawa,et al.  A comparative assessment of Brazilian electric motors performance with minimum efficiency standards , 2015 .

[40]  A.T. de Almeida,et al.  Considerations on in-field induction motor load estimation methods , 2008, 2008 18th International Conference on Electrical Machines.

[41]  Abel Cavalcante Lima Filho,et al.  Implementation and Deployment of an Intelligent Industrial Wireless System for Induction Motor Monitoring , 2017 .

[42]  B. Banerjee,et al.  Assessment of Voltage Unbalance , 2001, IEEE Power Engineering Review.

[43]  Florian Dörfler,et al.  A Fast Method for Real-Time Chance-Constrained Decision With Application to Power Systems , 2017, IEEE Control Systems Letters.

[44]  J.A. Rooks,et al.  Practical approach for determining motor efficiency in the field using calculated and measured values , 2003, Conference Record of the 2003 Annual Pulp and Paper Industry Technical Conference, 2003..

[45]  Raúl Rojas,et al.  Gravitational Search Algorithm Applied to Parameter Identification for Induction Motors , 2017 .

[46]  Sanket Nirmal,et al.  Real Time Automatic Blackboard Eraser Using Embedded System , 2016 .

[47]  Erik Valdemar Cuevas Jiménez,et al.  Induction Motor Parameter Identification Using a Gravitational Search Algorithm , 2016, Comput..

[48]  T.G. Habetler,et al.  A survey of efficiency-estimation methods for in-service induction motors , 2006, IEEE Transactions on Industry Applications.

[49]  Y. El-Ibiary An accurate low cost method for determining electric motors' efficiency for the purpose of plant energy management , 2002, Record of Conference Papers. Industry Applications Society. Forty-Ninth Annual Conference. 2002 Petroleum and Chemical Industry Technical Conference.

[50]  Paul D. Walker,et al.  Speed sensorless model predictive current control with ability to start a free running induction motor , 2017 .

[51]  Fabrice Morganti,et al.  A Noninvasive External Flux Based Method for In-Service Induction Motors Torque Estimation , 2019, IEEE Transactions on Energy Conversion.

[52]  E. Quispe,et al.  Harmonic Distortion Evaluation Generated by PWM Motor Drives in Electrical Industrial Systems , 2017 .