Projection micro stereolithography based 3D printing and its applications
暂无分享,去创建一个
Xiangnan He | Nicholas X. Fang | Wang Zhang | Qi Ge | Jianlin Zhou | Zhaolong Wang | Zhiqin Li | kavin Kowsari | N. Fang | Qi Ge | Xiangnan He | Wang Zhang | K. Kowsari | Zhiqin Li | Zhaolong Wang | Jianlin Zhou
[1] R. Yu,et al. Self-Healing Polyurethane Elastomers Based on a Disulfide Bond by Digital Light Processing 3D Printing. , 2019, ACS macro letters.
[2] Yayue Pan,et al. Fully Packaged Carbon Nanotube Supercapacitors by Direct Ink Writing on Flexible Substrates. , 2017, ACS applied materials & interfaces.
[3] Harry Bikas,et al. Additive manufacturing methods and modelling approaches: a critical review , 2015, The International Journal of Advanced Manufacturing Technology.
[4] Qi Ge,et al. Active materials by four-dimension printing , 2013 .
[5] Conner K. Dunn,et al. 3D printed reversible shape changing soft actuators assisted by liquid crystal elastomers. , 2017, Soft matter.
[6] Tianqi Xu,et al. Millimeter-scale flexible robots with programmable three-dimensional magnetization and motions , 2019, Science Robotics.
[7] A. Bagheri,et al. Photopolymerization in 3D Printing , 2019, ACS Applied Polymer Materials.
[8] Abdul W. Basit,et al. Stereolithographic (SLA) 3D printing of oral modified-release dosage forms. , 2016, International journal of pharmaceutics.
[9] Tian-Yun Huang,et al. Superrepellency of underwater hierarchical structures on Salvinia leaf , 2020, Proceedings of the National Academy of Sciences.
[10] Harald Giessen,et al. Two-photon direct laser writing of ultracompact multi-lens objectives , 2016, Nature Photonics.
[11] M. Layani,et al. 3D Printing of Shape Memory Polymers for Flexible Electronic Devices , 2016, Advanced materials.
[12] Yue Zhao,et al. 4D Printing of Liquid Crystal Elastomer with Controllable Orientation Gradient. , 2019, ACS applied materials & interfaces.
[13] Jiangtao Wu,et al. Evolution of material properties during free radical photopolymerization , 2018 .
[14] Qifa Zhou,et al. Electrically assisted 3D printing of nacre-inspired structures with self-sensing capability , 2019, Science Advances.
[15] Qi Ge,et al. Miniature Pneumatic Actuators for Soft Robots by High‐Resolution Multimaterial 3D Printing , 2019, Advanced Materials Technologies.
[16] Sourabh K. Saha,et al. Scalable submicrometer additive manufacturing , 2019, Science.
[17] Howon Lee,et al. Design and optimization of a light-emitting diode projection micro-stereolithography three-dimensional manufacturing system. , 2012, The Review of scientific instruments.
[18] Ningbin Zhang,et al. Fast‐Response, Stiffness‐Tunable Soft Actuator by Hybrid Multimaterial 3D Printing , 2019, Advanced Functional Materials.
[19] Wenzhao Zhou,et al. 3D printed micro-mechanical device (MMD) for in situ tensile testing of micro/nanowires , 2019, Extreme Mechanics Letters.
[20] Hao F. Zhang,et al. High‐Speed 3D Printing of Millimeter‐Size Customized Aspheric Imaging Lenses with Sub 7 nm Surface Roughness , 2018, Advanced materials.
[21] Howon Lee,et al. Ultralight, ultrastiff mechanical metamaterials , 2014, Science.
[22] A. Woolley,et al. Custom 3D printer and resin for 18 μm × 20 μm microfluidic flow channels. , 2017, Lab on a chip.
[23] Qifa Zhou,et al. Biomimetic Anisotropic Reinforcement Architectures by Electrically Assisted Nanocomposite 3D Printing , 2017, Advanced materials.
[24] Niels B. Larsen,et al. Stereolithographic hydrogel printing of 3D culture chips with biofunctionalized complex 3D perfusion networks. , 2017, Lab on a chip.
[25] Willie J Padilla,et al. Terahertz Magnetic Response from Artificial Materials , 2004, Science.
[26] Howon Lee,et al. Soft Robotic Manipulation and Locomotion with a 3D Printed Electroactive Hydrogel. , 2018, ACS applied materials & interfaces.
[27] Y. Li,et al. Deterministically patterned biomimetic human iPSC-derived hepatic model via rapid 3D bioprinting , 2016, Proceedings of the National Academy of Sciences.
[28] Jiangtao Wu,et al. 3D Printing of Highly Stretchable, Shape-Memory, and Self-Healing Elastomer toward Novel 4D Printing. , 2018, ACS applied materials & interfaces.
[29] R. Shelby,et al. Experimental Verification of a Negative Index of Refraction , 2001, Science.
[30] M. Gu,et al. Two-photon polymerisation for three-dimensional micro-fabrication , 2006 .
[31] Qifa Zhou,et al. 3D‐Printed Biomimetic Super‐Hydrophobic Structure for Microdroplet Manipulation and Oil/Water Separation , 2018, Advanced materials.
[32] Xiaoyu Zheng,et al. Multiscale metallic metamaterials. , 2016, Nature materials.
[33] Chao Yuan,et al. Multi-shape active composites by 3D printing of digital shape memory polymers , 2016, Scientific Reports.
[34] Elisabetta A. Matsumoto,et al. Biomimetic 4D printing. , 2016, Nature materials.
[35] Clément Gosselin,et al. Large-scale 3D printing of ultra-high performance concrete – a new processing route for architects and builders , 2016 .
[36] Kunhao Yu,et al. Additive manufacturing of self-healing elastomers , 2019, NPG Asia Materials.
[37] Qi Ge,et al. Ultrafast three-dimensional printing of optically smooth microlens arrays by oscillation assisted digital light processing. , 2019, ACS applied materials & interfaces.
[38] J. Rosell-Llompart,et al. Ultrafast 3D printing with submicrometer features using electrostatic jet deflection , 2020, Nature Communications.
[39] Martin L. Dunn,et al. Sequential Self-Folding Structures by 3D Printed Digital Shape Memory Polymers , 2015, Scientific Reports.
[40] Satoshi Kawata,et al. Finer features for functional microdevices , 2001, Nature.
[41] Chiara Daraio,et al. Untethered soft robotic matter with passive control of shape morphing and propulsion , 2019, Science Robotics.
[42] Marcel A. Heinrich,et al. Rapid Continuous Multimaterial Extrusion Bioprinting , 2017, Advanced materials.
[43] N. Fang,et al. Ultrasonic metamaterials with negative modulus , 2006, Nature materials.
[44] Ramesh Raskar,et al. Active Printed Materials for Complex Self-Evolving Deformations , 2014, Scientific Reports.
[45] Shlomo Magdassi,et al. Novel Materials for 3D Printing by Photopolymerization , 2018, Advanced materials.
[46] WangDong,et al. High-Efficiency High-Resolution Multimaterial Fabrication for Digital Light Processing-Based Three-Dimensional Printing , 2018 .
[47] T. T. Le,et al. Mix design and fresh properties for high-performance printing concrete , 2012 .
[48] Ok Joo Lee,et al. Precisely printable and biocompatible silk fibroin bioink for digital light processing 3D printing , 2018, Nature Communications.
[49] N. Fang,et al. Lightweight Mechanical Metamaterials with Tunable Negative Thermal Expansion. , 2016, Physical review letters.
[50] R. Spolenak,et al. Multi-metal electrohydrodynamic redox 3D printing at the submicron scale , 2019, Nature Communications.
[51] Damien Loterie,et al. High-resolution tomographic volumetric additive manufacturing , 2020, Nature Communications.
[52] Amir Hosein Sakhaei,et al. Highly stretchable hydrogels for UV curing based high-resolution multimaterial 3D printing. , 2018, Journal of materials chemistry. B.
[53] Conner K. Dunn,et al. Digital light processing 3D printing of conductive complex structures , 2017 .
[54] Chad A. Mirkin,et al. Rapid, large-volume, thermally controlled 3D printing using a mobile liquid interface , 2019, Science.
[55] Wei Zhu,et al. Biomimetic 3D-printed scaffolds for spinal cord injury repair , 2019, Nature Medicine.
[56] Howon Lee,et al. Rapid multi-material 3D printing with projection micro-stereolithography using dynamic fluidic control , 2019, Additive Manufacturing.
[57] Martin L. Dunn,et al. Active origami by 4D printing , 2014 .
[58] Petr Smejkal,et al. Comparing Microfluidic Performance of Three-Dimensional (3D) Printing Platforms. , 2017, Analytical chemistry.
[59] N. Fang,et al. Focusing ultrasound with an acoustic metamaterial network. , 2009, Physical review letters.
[60] Cheng Sun,et al. Micro-stereolithography of polymeric and ceramic microstructures , 1999 .
[61] Howon Lee,et al. 4D printing reconfigurable, deployable and mechanically tunable metamaterials , 2019, Materials Horizons.
[62] Satoshi Kawata,et al. Improved spatial resolution and surface roughness in photopolymerization-based laser nanowriting , 2005 .
[63] Howon Lee,et al. 4D Printing of a Bioinspired Microneedle Array with Backward‐Facing Barbs for Enhanced Tissue Adhesion , 2020, Advanced Functional Materials.
[64] Howon Lee,et al. Micro 3D Printing of a Temperature-Responsive Hydrogel Using Projection Micro-Stereolithography , 2018, Scientific Reports.
[65] Mark A. Skylar-Scott,et al. Voxelated soft matter via multimaterial multinozzle 3D printing , 2019, Nature.
[66] John R. Tumbleston,et al. Continuous liquid interface production of 3D objects , 2015, Science.
[67] Zhuangjian Liu,et al. Self-Healing Four-Dimensional Printing with an Ultraviolet Curable Double-Network Shape Memory Polymer System. , 2019, ACS applied materials & interfaces.
[68] Maxim Shusteff,et al. Volumetric additive manufacturing via tomographic reconstruction , 2019, Science.
[69] Hanqing Jiang,et al. Visualizing morphogenesis through instability formation in 4-D printing. , 2019, ACS applied materials & interfaces.
[70] Martin L. Dunn,et al. Reprocessable thermosets for sustainable three-dimensional printing , 2018, Nature Communications.
[71] Srinivas Sridhar,et al. Photonic crystals: Imaging by flat lens using negative refraction , 2003, Nature.
[72] Nicholas X. Fang,et al. Projection micro-stereolithography using digital micro-mirror dynamic mask , 2005 .
[73] Joanna Aizenberg,et al. 3D Printable and Reconfigurable Liquid Crystal Elastomers with Light‐Induced Shape Memory via Dynamic Bond Exchange , 2019, Advanced materials.
[74] Aliaa I. Shallan,et al. Cost-effective three-dimensional printing of visibly transparent microchips within minutes. , 2014, Analytical chemistry.
[75] Chunguang Xia,et al. Broadband acoustic cloak for ultrasound waves. , 2010, Physical review letters.
[76] Amir Hosein Sakhaei,et al. Highly Stretchable and UV Curable Elastomers for Digital Light Processing Based 3D Printing , 2017, Advanced materials.
[77] Martin L. Dunn,et al. Advances in 4D Printing: Materials and Applications , 2018, Advanced Functional Materials.
[78] Satoshi Kawata,et al. Improving spatial resolution of two-photon microfabrication by using photoinitiator with high initiating efficiency , 2007 .
[79] Randall M. Erb,et al. Designing bioinspired composite reinforcement architectures via 3D magnetic printing , 2015, Nature Communications.
[80] Amir Hosein Sakhaei,et al. Multimaterial 4D Printing with Tailorable Shape Memory Polymers , 2016, Scientific Reports.