Microstructure evolution and mechanical properties of a novel γ′ phase-strengthened Ir-W-Al-Th superalloy

[1]  Yuanhua Lin,et al.  Influence of transition metal on the mechanical and thermodynamic properties of IrAl thermal barrier coating , 2020 .

[2]  Yong Pan,et al.  Adjusting the correlation between the oxidation resistance and mechanical properties of Pt-based thermal barrier coating , 2020 .

[3]  Yuqiong Li,et al.  Influence of Ir concentration on the structure, elastic modulus and elastic anisotropy of Nb Ir based compounds from first-principles calculations , 2019, Journal of Alloys and Compounds.

[4]  Dong‐sheng Li,et al.  Dynamic recrystallization behavior of Fe–20Cr–30Ni–0.6Nb–2Al–Mo alloy , 2019, Rare Metals.

[5]  Jian-xin Dong,et al.  Nucleation mechanisms of dynamic recrystallization for G3 alloy during hot compression , 2016, Rare Metals.

[6]  Lijun Wang,et al.  Iridium concentration driving the mechanical properties of iridium–aluminum compounds , 2015 .

[7]  Y. Liu.  Investigation on Microstructure and Fracture Mechanism of Iridium Sheet at Room Temperature , 2015 .

[8]  K. Ishida,et al.  Phase equilibria and mechanical properties of the Ir–W–Al system , 2014 .

[9]  Yong Du,et al.  Thermodynamic and mechanical stabilities of γ′-Ir3(Al,W) , 2011 .

[10]  Peng Jian,et al.  Creep behavior of a Fe-based bulk amorphous alloy using nanoindentation , 2009 .

[11]  H. Harada,et al.  Microstructural evaluation and mechanical properties of Ir–Hf–Zr ternary alloys at room and high temperatures , 2006 .

[12]  K. Ishida,et al.  Cobalt-Base High-Temperature Alloys , 2006, Science.

[13]  D. Pettifor,et al.  Origin of Brittle Cleavage in Iridium , 2005, Science.

[14]  M. Xin,et al.  Measurement of Mechanical Properties of Sn--Ag--Cu Bulk Solder BGA Solder Joint Using Nanoindentation , 2005 .

[15]  G. H. Rinehart,et al.  Long Life Radioisotopic Power Sources Encapsulated in Platinum Metal Alloys CASSINI MISSION TO STUDY SATURN AND ITS MOONS , 2005 .

[16]  Chih-Feng Huang,et al.  Mechanical properties of Ir–Nb–Pt–Al quaternary alloys , 2004 .

[17]  H. Harada,et al.  High-temperature mechanical properties of Ir-Al alloys , 2003 .

[18]  Yuefeng Gu,et al.  Ultra-high-temperature deformation of polycrystalline and directionally solidified L12 intermetallic compound Ir3Nb , 2003 .

[19]  H. Harada,et al.  Creep Behavior of Ir-Nb and Ir-Zr Refractory Superalloys , 2002 .

[20]  H. Harada,et al.  Two-Phase Iridum-Based Refractory Sup eralloy s THEIR DEVELOPMENT AND POSSIBILITIES AS HIGH TEMPERATURE STRUCTURAL MATERIALS , 2002 .

[21]  E. George,et al.  Deformation and fracture of iridium: microalloying effects , 2001 .

[22]  E. George,et al.  Grain-boundary segregation of impurities in iridium and effects on mechanical properties , 2001 .

[23]  H. Harada,et al.  Compression properties of B-doped Ir-15Nb two-phase refractory superalloys , 1999 .

[24]  H. Harada,et al.  Ir-base refractory superalloys for ultra-high temperatures , 1998 .

[25]  H. Hosoda,et al.  Phase stability and mechanical properties of IrAl alloys , 1997 .

[26]  E. George,et al.  Grain-growth behavior and low-pressure oxygen compatibility of an Ir-0.3 wt.% W alloy , 1996 .

[27]  Y. Koizumi,et al.  Development of Ir-base refractory superalloys , 1996 .

[28]  W. L. Worrell,et al.  High-temperature oxidation behavior of iridium-based alumina-forming ternary intermetallics , 1994 .

[29]  Andrzej Majchrowski,et al.  Czochralski growth of oxide single crystals under conditions of forced convection in the melt , 1993 .

[30]  P. Rao,et al.  Phase Diagrams of Binary Tungsten Alloys , 1991 .

[31]  C. Liu,et al.  Effect of Thorium Additions on Metallurgical and Mechanical Properties of Ir-0.3 pct W Alloys , 1981 .