On long-term fatigue damage and reliability analysis of gears under wind loads in offshore wind turbine drivetrains

Abstract In this paper, a long-term fatigue damage analysis method for gear tooth root bending in wind turbine’s drivetrains is presented. The proposed method is established based on the ISO gear design codes which are basically developed for gears in general applications, not specifically for wind turbine gears. The ISO procedure is adapted and further improved to include the long-term fatigue damage of wind turbine’s gears. The load duration distribution (LDD) method is used to obtain the short-term stress cycles from the input load time series of global response analysis. Dynamic loads and load effects in the gearbox are obtained by two dynamic models; a simplified approach and Multi Body Simulation (MBS) method. A good agreement between these two methods is observed. The long-term fatigue damage is then calculated based on the SN-curve approach by considering all short-term damages and the long-term wind speed distribution. Finally, the reliability and service life probability of failure considering load and load effect uncertainties is calculated. The procedure is exemplified by a 5 MW gearbox designed for a pitch controlled, bottom-fixed offshore wind turbine.

[1]  Yihan Xing.  Modelling and analysis of the gearbox in a floating spar-type wind turbine , 2013 .

[2]  S. Haver,et al.  Joint Distribution For Wind And Waves In the Northern North Sea , 2002 .

[3]  Ahmet Kahraman,et al.  A deformable body dynamic analysis of planetary gears with thin rims , 2003 .

[4]  Agma Information Sheet.  AMERICAN GEAR MANUFACTURERS ASSOCIATION Geometry Factors for Determining the Pitting Resistance and Bending Strength of Spur, Helical and Herringbone Gear Teeth , 1999 .

[5]  Inge Lotsberg,et al.  Background for New Revision of DNV-RP-C203 Fatigue Design of Offshore Steel Structures , 2010 .

[6]  P J Tavner.  Reliability of Different Wind Turbine Concepts with Relevance to Offshore Application , 2012 .

[7]  Torgeir Moan,et al.  Effects of floating sun gear in a wind turbine's planetary gearbox with geometrical imperfections , 2015 .

[8]  Ashley Crowther,et al.  Sources of time‐varying contact stress and misalignments in wind turbine planetary sets , 2011 .

[9]  Torgeir Moan,et al.  Fatigue reliability analysis of the jacket support structure for offshore wind turbine considering the effect of corrosion and inspection , 2012, Reliab. Eng. Syst. Saf..

[10]  Torgeir Moan,et al.  Time domain-based gear contact fatigue analysis of a wind turbine drivetrain under dynamic conditions , 2013 .

[11]  G. Muthuveerappan,et al.  Finite element modelling and stress analysis of helical gear teeth , 1993 .

[12]  N. J. Tarp-Johansen.  Examples of Fatigue Lifetime and Reliability Evaluation of Larger Wind Turbine Components , 2003 .

[13]  Andrzej Kawalec,et al.  Tooth Root Strength of Spur and Helical Gears Manufactured With Gear-Shaper Cutters , 2008 .

[14]  Torgeir Moan,et al.  Multi‐body modelling and analysis of a planet carrier in a wind turbine gearbox , 2013 .

[15]  Liwei,et al.  Investigation of bending fatigue strength limit of alloy steel gear teeth , 2012 .

[16]  Ahmet Kahraman,et al.  Dynamic tooth loads of planetary gear sets having tooth profile wear , 2004 .

[17]  C. J. Aylott,et al.  The role of residual stress on the fatigue strength of high performance gearing , 2003 .

[18]  Robert G. Parker,et al.  NON-LINEAR DYNAMIC RESPONSE OF A SPUR GEAR PAIR: MODELLING AND EXPERIMENTAL COMPARISONS , 2000 .

[19]  Torgeir Moan,et al.  Long-term analysis of gear loads in fixed offshore wind turbines considering ultimate operational loadings , 2013 .

[20]  Knut O. Ronold,et al.  Variability of extreme flap loads during turbine operation , 1999 .

[21]  J. Jonkman,et al.  Definition of a 5-MW Reference Wind Turbine for Offshore System Development , 2009 .

[22]  F. Oyague,et al.  Gearbox Modeling and Load Simulation of a Baseline 750-kW Wind Turbine Using State-of-the-Art Simulation Codes , 2009 .

[23]  R. Parker,et al.  Dynamic Response of a Planetary Gear System Using a Finite Element/Contact Mechanics Model , 2000 .

[24]  Torgeir Moan,et al.  Stochastic Dynamics of Marine Structures: Index , 2012 .

[25]  S. Butterfield,et al.  Improving Wind Turbine Gearbox Reliability , 2007 .

[26]  Dariusz Ceglarek,et al.  Comparative Analysis of Tooth-Root Strength Using ISO and AGMA Standards in Spur and Helical Gears With FEM-based Verification , 2006 .

[27]  Q. J. Yang.  Fatigue test and reliability design of gears , 1996 .

[28]  Knut O. Ronold,et al.  On the estimation of characteristic S–N curves with confidence , 2012 .

[29]  Christos Spitas,et al.  Numerical and experimental comparative study of strength-optimised AGMA and FZG spur gears , 2007 .

[30]  Torgeir Moan,et al.  Stochastic Dynamic Response Analysis of a Tension Leg Spar-Type Offshore Wind Turbine , 2013 .

[31]  Chung-Biau Tsay,et al.  Stress analysis of a helical gear set with localized bearing contact , 2002 .

[32]  Niels C. Lind,et al.  Methods of structural safety , 2006 .

[33]  Joris Peeters.  Simulation of Dynamic Drive Train Loads in a Windturbine (Simulatie van de dynamische belasting in de aandrijflijn van een windturbine) , 2006 .