Efficiency of injected anchors in masonry elements: Evaluation of pull-out strength
暂无分享,去创建一个
Nicola Caterino | Francesca Ceroni | Raimondo Luciano | Hossein Darban | R. Luciano | F. Ceroni | N. Caterino | H. Darban
[1] Francesca Ceroni,et al. Assessment of performance of steel and GFRP bars as injected anchors in masonry walls , 2016 .
[2] Andrea Prota,et al. Out-of-plane experimental behaviour of T-shaped full scale masonry wall strengthened with composite connections , 2016 .
[3] Manicka Dhanasekar,et al. Modelling the failure of thin layered mortar joints in masonry , 2013 .
[4] Mijia Yang,et al. Bond mechanism and bond strength of GFRP bars to concrete: A review , 2016 .
[5] H Shakir-Khalil,et al. PUSHOUT STRENGTH OF CONCRETE-FILLED STEEL HOLLOW SECTION TUBES , 1993 .
[6] Charles L. Bartholomew,et al. FRP Reinforcing Bars in Reinforced Concrete Members , 1993 .
[7] Paulo B. Lourenço,et al. Numerical study on the performance of improved masonry-to-timber connections in traditional masonry buildings , 2014 .
[9] B. G. Rabbat,et al. Friction Coefficient of Steel on Concrete or Grout , 1985 .
[11] M. Fagone,et al. Round Robin Test on tensile and bond behaviour of Steel Reinforced Grout systems , 2017 .
[12] Paulo B. Lourenço,et al. Analysis of Masonry Structures Without Box Behavior , 2011 .
[13] Maria Rosa Valluzzi,et al. On-Site Pull-Out Tests of Steel Anchor Spikes Applied to Brickwork Masonry , 2014 .
[14] Simona Voto,et al. Historical, Architectural, and Structural Assessment of the Bell Tower of Santa Maria Del Carmine , 2009 .
[15] Youn Ju Jeong,et al. Steel-concrete interface behavior and analysis for push-out , 2005 .
[16] Dina D'Ayala,et al. Testing and design procedure for corner connections of masonry heritage buildings strengthened by metallic grouted anchors , 2014 .
[17] Dong-Ho Ha,et al. Mechanical properties of constitutive parameters in steel-concrete interface , 2011 .
[18] Paulo B. Lourenço,et al. Experimental behavior of masonry wall-to-timber elements connections strengthened with injection anchors , 2014 .
[19] F. Xing,et al. Shear strength components of adjustable hybrid bonded CFRP shear-strengthened RC beams , 2019, Composites Part B: Engineering.
[20] Marco Di Ludovico,et al. Traditional and innovative systems for injected anchors in masonry elements: Experimental behavior and theoretical formulations , 2020 .
[21] H. Saadatmanesh,et al. Design Recommendations for Bond of GFRP Rebars to Concrete , 1996 .
[22] Sinan Altin,et al. Hysteretic behavior of RC shear walls strengthened with CFRP strips , 2013 .
[23] N. Augenti,et al. Constitutive modelling of tuff masonry in direct shear , 2011 .
[24] Hiroshi Shima,et al. RECOMMENDATION FOR DESIGN AND CONSTRUCTION OF CONCRETE STRUCTURES USING CONTINUOUS FIBER REINFORCING MATERIALS (DESIGN) , 1997 .
[25] Andrea Prota,et al. Case Study: Seismic Upgrade of a Masonry Bell Tower Using Glass Fiber-Reinforced Polymer Ties , 2009 .
[26] Ronald A. Cook. Behavior of Chemically Bonded Anchors , 1993 .
[28] Carol K. Shield,et al. Development Length of Glass Fiber-Reinforced Polymer Bars in Concrete , 2006 .
[29] Antonio Borri,et al. Shear strengthening of wall panels through jacketing with cement mortar reinforced by GFRP grids , 2014 .
[30] Emidio Nigro,et al. Bond of NSM FRP-strengthened concrete: round robin test initiative , 2016 .
[31] Silvia Santini,et al. Design by testing: A procedure for the statistical determination of capacity models , 2009 .
[32] Paolo Riva,et al. Experimental Study on Injected Anchors for the Seismic Retrofit of Historical Masonry Buildings , 2015 .
[33] G. Manfredi,et al. Development length of FRP straight rebars , 2002 .
[34] Subhamoy Bhattacharya,et al. A critical review of retrofitting methods for unreinforced masonry structures , 2014 .