Regulating Bulk‐Heterojunction Molecular Orientations through Surface Free Energy Control of Hole‐Transporting Layers for High‐Performance Organic Solar Cells

Interface properties are of critical importance for high-performance bulk-heterojunction (BHJ) organic solar cells (OSCs). Here, a universal interface approach to tune the surface free energy (γS ) of hole-transporting layers (HTLs) in a wide range through introducing poly(styrene sulfonic acid) sodium salts or nickel formate dihydrate into poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) is reported. Based on the optimal γS of HTLs and thus improved face-on molecular ordering in BHJs, enhanced fill factor and power conversion efficiencies in both fullerene and nonfullerene OSCs are achieved, which is attributed to the increased charge carrier mobility and sweepout with reduced recombination. It is found that the face-on orientation-preferred BHJs (PBDB-TF:PC71 BM, PBDB-T:PC71 BM, and PBDB-TF:IT-4F) favor HTLs with higher γS while the edge-on orientation-preferred BHJs (PDCDT:PC71 BM, P3HT:PC71 BM and PDCBT:ITIC) are partial to HTLs with lower γS . Based on the surface property-morphology-device performance correlations, a suggestion to select a suitable HTL in terms of γS for a specific BHJ with favored molecular arrangement is provided. This work enriches the fundamental understandings on the interface characteristics and morphological control toward high-efficiency OSCs based on a wide range of BHJ materials.

[1]  F. Krebs.  Fabrication and processing of polymer solar cells: A review of printing and coating techniques , 2009 .

[2]  H. Ade,et al.  Manipulating Aggregation and Molecular Orientation in All‐Polymer Photovoltaic Cells , 2015, Advanced materials.

[3]  Yu-Shan Cheng,et al.  Fullerene Derivative‐Doped Zinc Oxide Nanofilm as the Cathode of Inverted Polymer Solar Cells with Low‐Bandgap Polymer (PTB7‐Th) for High Performance , 2013, Advanced materials.

[4]  Weiwei Li,et al.  A real-time study of the benefits of co-solvents in polymer solar cell processing , 2015, Nature Communications.

[5]  Yun Zhang,et al.  Environmentally Friendly Solvent‐Processed Organic Solar Cells that are Highly Efficient and Adaptable for the Blade‐Coating Method , 2018, Advanced materials.

[6]  Takao Someya,et al.  Stretchable and waterproof elastomer-coated organic photovoltaics for washable electronic textile applications , 2017 .

[7]  Runnan Yu,et al.  Design, Synthesis, and Photovoltaic Characterization of a Small Molecular Acceptor with an Ultra-Narrow Band Gap. , 2017, Angewandte Chemie.

[8]  Changyun Jiang,et al.  Investigating coating method induced vertical phase distribution in polymer-fullerene organic solar cells , 2017 .

[9]  G. Wang,et al.  Vertical Stratification Engineering for Organic Bulk-Heterojunction Devices. , 2018, ACS nano.

[10]  Fan Yang,et al.  Morphology Control Enables Efficient Ternary Organic Solar Cells , 2018, Advanced materials.

[11]  Z. Tang,et al.  A Highly Efficient Non‐Fullerene Organic Solar Cell with a Fill Factor over 0.80 Enabled by a Fine‐Tuned Hole‐Transporting Layer , 2018, Advanced materials.

[12]  Yang Yang,et al.  A polymer tandem solar cell with 10.6% power conversion efficiency , 2013, Nature Communications.

[13]  Jayanta K. Baral,et al.  Relating chemical structure to device performance via morphology control in diketopyrrolopyrrole-based low band gap polymers. , 2013, Journal of the American Chemical Society.

[14]  Yun Zhang,et al.  Molecular Optimization Enables over 13% Efficiency in Organic Solar Cells. , 2017, Journal of the American Chemical Society.

[15]  H. Yao,et al.  High‐Efficiency Polymer Solar Cells Enabled by Environment‐Friendly Single‐Solvent Processing , 2016 .

[16]  H. Ade,et al.  Efficient organic solar cells processed from hydrocarbon solvents , 2016, Nature Energy.

[17]  Christoph J. Brabec,et al.  Air-processed polymer tandem solar cells with power conversion efficiency exceeding 10% , 2015 .

[18]  Robert P. H. Chang,et al.  Polymer solar cells with enhanced fill factors , 2013, Nature Photonics.

[19]  Itaru Osaka,et al.  Efficient inverted polymer solar cells employing favourable molecular orientation , 2015, Nature Photonics.

[20]  Daoben Zhu,et al.  An Electron Acceptor Challenging Fullerenes for Efficient Polymer Solar Cells , 2015, Advanced materials.

[21]  A. Heeger,et al.  Transient Photocurrent Response of Small‐Molecule Bulk Heterojunction Solar Cells , 2014, Advanced materials.

[22]  Jianhui Hou,et al.  Highly Efficient Fullerene‐Free Polymer Solar Cells Fabricated with Polythiophene Derivative , 2016, Advanced materials.

[23]  He Yan,et al.  Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells , 2014, Nature Communications.

[24]  H. Ade,et al.  A Polythiophene Derivative with Superior Properties for Practical Application in Polymer Solar Cells , 2014, Advanced materials.

[25]  Dongyang Zhang,et al.  Ultra-narrow bandgap non-fullerene organic solar cells with low voltage losses and a large photocurrent , 2018 .

[26]  Jianhui Hou,et al.  Ternary Polymer Solar Cells based on Two Acceptors and One Donor for Achieving 12.2% Efficiency , 2017, Advanced materials.

[27]  Yongfang Li,et al.  Indene-C(60) bisadduct: a new acceptor for high-performance polymer solar cells. , 2010, Journal of the American Chemical Society.

[28]  Fei Huang,et al.  Inverted polymer solar cells with 8.4% efficiency by conjugated polyelectrolyte , 2012 .

[29]  Xiao-Fang Jiang,et al.  High-Performance Ternary Organic Solar Cell Enabled by a Thick Active Layer Containing a Liquid Crystalline Small Molecule Donor. , 2017, Journal of the American Chemical Society.

[30]  Qi Zhang,et al.  Perovskite and Organic Solar Cells Fabricated by Inkjet Printing: Progress and Prospects , 2017 .

[31]  Yongsheng Chen,et al.  Evaluation of Small Molecules as Front Cell Donor Materials for High‐Efficiency Tandem Solar Cells , 2016, Advanced materials.

[32]  F. Liu,et al.  Optimized Fibril Network Morphology by Precise Side‐Chain Engineering to Achieve High‐Performance Bulk‐Heterojunction Organic Solar Cells , 2018, Advanced materials.

[33]  Y. Zhang,et al.  Design of a New Fused‐Ring Electron Acceptor with Excellent Compatibility to Wide‐Bandgap Polymer Donors for High‐Performance Organic Photovoltaics , 2018, Advanced materials.

[34]  Francisco Molina-Lopez,et al.  Roll‐to‐Roll Printed Large‐Area All‐Polymer Solar Cells with 5% Efficiency Based on a Low Crystallinity Conjugated Polymer Blend , 2017 .

[35]  John R. Tumbleston,et al.  Domain Purity, Miscibility, and Molecular Orientation at Donor/Acceptor Interfaces in High Performance Organic Solar Cells: Paths to Further Improvement , 2013 .

[36]  Markus Hösel,et al.  Roll-to-roll fabrication of polymer solar cells , 2012 .

[37]  Thuc‐Quyen Nguyen,et al.  Effects of Processing Conditions on the Recombination Reduction in Small Molecule Bulk Heterojunction Solar Cells , 2014 .

[38]  Jin Young Kim,et al.  Processing additives for improved efficiency from bulk heterojunction solar cells. , 2008, Journal of the American Chemical Society.

[39]  D. Kumaki,et al.  Surface-energy-dependent field-effect mobilities up to 1 cm2/V s for polymer thin-film transistor , 2009 .

[40]  H. Ade,et al.  A Large‐Bandgap Conjugated Polymer for Versatile Photovoltaic Applications with High Performance , 2015, Advanced materials.

[41]  D. K. Owens,et al.  Estimation of the surface free energy of polymers , 1969 .

[42]  Yang Yang,et al.  High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends , 2005 .