AFRL-RX-WP-JA-2017-0503 OXIDATION RESPONSE OF A SICF / SIC CMC WITH A HfB 2-BASED COATING IN AN ARC JET TEST ( POSTPRINT )
暂无分享,去创建一个
Inc. | Ues | C. Carney | M. D. S. Fumo | E. Trifoni | G. Marino | C. Purpura | A. Martucci | T. Parthasarathy
[1] D. King,et al. Novel processing approach to polymer‐derived ceramic matrix composites , 2018 .
[2] J. Binner,et al. Evaluation of the high temperature performance of HfB2 UHTC particulate filled Cf/C composites , 2017 .
[3] Wang Lu,et al. A novel gradient SiC-ZrB2-MoSi2 coating for SiC coated C/C composites by supersonic plasma spraying , 2017 .
[4] C. Leslie,et al. Oxidation of SiCf/SiC‐HfB2 Composites under Laser Heating , 2016 .
[5] Chen Zhao-hui,et al. High-temperature protective coatings for C/SiC composites , 2014 .
[6] Hejun Li,et al. Ablation behavior and mechanism of C/C–ZrC–SiC composites under an oxyacetylene torch at 3000 °C , 2013 .
[7] D. L. Myers,et al. Active Oxidation of SiC , 2011 .
[8] Raffaele Savino,et al. Plasma wind tunnel testing of ultra-high temperature ZrB2-SiC composites under hypersonic re-entry conditions , 2010 .
[9] D. Alfano,et al. Microstructural characterization of ZrB2-SiC based UHTC tested in the MESOX plasma facility , 2010 .
[10] Mario De Stefano Fumo,et al. Arc-Jet Testing of Ultra-High-Temperature-Ceramics , 2010 .
[11] D. Alfano,et al. Emissivity and catalycity measurements on SiC-coated carbon fibre reinforced silicon carbide composite , 2009 .
[12] W. Bo,et al. SiCn/SiC oxidation protective coating for carbon/carbon composites , 2009 .
[13] Jean-Louis Sans,et al. Effect of the Machining Method on the Catalycity and Emissivity of ZrB2 and ZrB2–HfB2‐Based Ceramics , 2008 .
[14] Raffaele Savino,et al. Arc-jet testing on HfB2 and HfC-based ultra-high temperature ceramic materials , 2008 .
[15] Ke Yang,et al. Ablation behaviors of ultra-high temperature ceramic composites , 2007 .
[16] E. Opila,et al. UHTCs: Ultra-High Temperature Ceramic Materials for Extreme Environment Applications , 2007 .
[17] Raffaele Savino,et al. The GHIBLI plasma wind tunnel: Description of the new CIRA-PWT facility , 2006 .
[18] C. Berndt,et al. Nanostructured and conventional YSZ coatings deposited using APS and TTPR techniques , 2006 .
[19] W. Krenkel,et al. C/C–SiC composites for space applications and advanced friction systems , 2005 .
[20] Donald T. Ellerby,et al. Processing, properties and arc jet oxidation of hafnium diboride/silicon carbide ultra high temperature ceramics , 2004 .
[21] V. D. Tarasov,et al. The Spectral Emissivity of an Oxide Film of Zirconium for Wavelengths of 530 and 650 nm in the Temperature Range from 1450 to 1750 K , 2004 .
[22] J. D. Milhoan,et al. Arc Jet Results on Candidate High Temperature Coatings for NASA's NGLT Refractory Composite Leading Edge Task , 2004 .
[23] Hermann Hald,et al. Operational limits for reusable space transportation systems due to physical boundaries of C/SiC materials , 2003 .
[24] R. Day,et al. Conversion of polycarbosilane (PCS) to SiC-based ceramic Part 1. Characterisation of PCS and curing products , 2001 .
[25] N. Iwamoto,et al. The improvement in oxidation resistance of CVD-SiC coated C/C composites by silicon infiltration pretreatment , 1998 .
[26] J. Bill,et al. Polymer-derived ceramic coatings on C/C-SiC composites , 1996 .
[27] A. Oberlin,et al. Conversion mechanisms of a polycarbosilane precursor into an SiC-based ceramic material , 1991, Journal of Materials Science.
[28] N. F. Krasnov,et al. Aerodynamics of Bodies of Revolution , 1970 .
[29] E. V. Zoby. Empirical stagnation-point heat-transfer relation in several gas mixtures at high enthalpy levels , 1968 .