Fabrication of a seamless roller mold with wavy microstructures using mask-less curved surface beam pen lithography

Roller imprinting is one of the most commonly used methods for the fabrication of continuous functional structures over large areas. However, the fabrication of roller molds with seamless and complex patterns poses a significant challenge. This paper presents an innovative technique for fabricating a seamless roller mold with wavy microstructures using a novel mask-less curved surface beam pen lithography technique. The major steps in the proposed technique include spray coating a thin photo-resist (PR) layer on the roller, exposing the PR layer though a translating micro-lens array (MLA), etching the patterned PR layer, and electro-polishing the etched microstructures. The proposed method is used to pattern roller molds with different wavy microstructures by varying the rotation speed of the roller, the translation speed of the MLA holder, and the translation distance of the MLA holder. The patterned metal roller molds are then used to replicate wavy microstructures on a thin polyethylene terephthalate substrate by means of continuous UV-type roller imprinting methods. The line-width and height of the wavy microstructure are 84.5 µm and 25.5 µm, respectively.

[1]  Rajesh Menon,et al.  The case for diffractive optics in maskless lithography , 2003 .

[2]  Sum Huan Ng,et al.  Investigation of hot roller embossing for microfluidic devices , 2009 .

[3]  Yung-Chun Lee,et al.  Excimer laser micromachining of aspheric microlens arrays based on optimal contour mask design and laser dragging method. , 2012, Optics express.

[4]  R. Cingolani,et al.  High throughput electron beam lithography on insulating substrates for photonic devices , 2007 .

[5]  Shinill Kang,et al.  Design and fabrication of micro optical film by ultraviolet roll imprinting , 2007 .

[6]  Sum Huan Ng,et al.  Micro-fabrication of polymeric devices using hot roller embossing , 2009 .

[7]  Rajesh Menon,et al.  Fabrication of high-numerical-aperture phase zone plates with a single lithography exposure and no etching , 2003 .

[8]  Fei-Bin Hsiao,et al.  Fabrication of Seamless Roller Mold for Continuous Roller Imprinting of Microlens Array Films , 2012, Journal of Microelectromechanical Systems.

[9]  Mao-Hong Lu,et al.  Dye-less color filter fabricated by roll-to-roll imprinting for liquid crystal display applications. , 2009, Optics express.

[10]  C. Ting,et al.  Subwavelength structures for broadband antireflection application , 2009 .

[11]  Kim Y. Lee,et al.  Multiple electron-beam lithography , 2001 .

[12]  Tzu-Chien Huang,et al.  Dip coating cooperated with stepped rotating lithography to fabricate rigid microstructures onto a metal roller , 2010 .

[13]  I. Lin,et al.  Fabrication of 3D polymer microstructures using electron beam lithography and nanoimprinting technologies , 2006 .

[14]  Po-Hsun Huang,et al.  Direct fabrication of microstructures on metal roller using stepped rotating lithography and electroless nickel plating , 2009 .

[15]  Tomi Haatainen,et al.  Continuous Double-Sided Roll-to-Roll Imprinting of Polymer Film , 2008 .

[16]  Chang-Pin Chou,et al.  Fabrication of an antireflective polymer optical film with subwavelength structures using a roll-to-roll micro-replication process , 2008 .

[17]  Shih-Chieh Lin,et al.  Sub-wavelength gratings fabricated on a light bar by roll-to-roll UV embossing process. , 2011, Optics express.

[18]  Andreas Wolf,et al.  Origination of nano- and microstructures on large areas by interference lithography , 2012 .

[19]  Yu-Chong Tai,et al.  The marching velocity of the capillary meniscus in a microchannel , 2004 .

[20]  A. Vijayaraghavan,et al.  Directed self-assembly of block copolymers for use in bit patterned media fabrication , 2013 .

[21]  C. Chuang,et al.  Fabrication of Multi-Functional Optical Films by Using a Ultraviolet Curing Roll-to-Roll System , 2011 .

[22]  Xun Hou,et al.  Direct fabrication of seamless roller molds with gapless and shaped-controlled concave microlens arrays. , 2012, Optics letters.

[23]  Mark G. Blamire,et al.  Focused ion beam fabrication of silicon print masters , 2003 .

[24]  Walied A. Moussa,et al.  Optimization of geometric characteristics to improve sensing performance of MEMS piezoresistive strain sensors , 2009 .

[25]  Po-Hsun Huang,et al.  Fabrication of microlens arrays using UV micro-stamping with soft roller and gas-pressurized platform , 2008 .

[26]  Sen-Yue Yang,et al.  A roller embossing process for rapid fabrication of microlens arrays on glass substrates , 2006 .

[27]  Ampere A. Tseng,et al.  Recent developments in micromilling using focused ion beam technology , 2004 .

[28]  Hiroshi Goto,et al.  Prototype development of a roller imprint system and its application to large area polymer replication for a microstructured optical device , 2008 .

[29]  Axel Scherer,et al.  Fabrication of High-Density Nanostructures by Electron Beam Lithography , 1998 .