Stiffness Method for Curved Box Girders at Initial Stress

A method of analysis of the global behavior of long curved or straight single-cell girders with or without initial stress is presented. It is based on thin-wall beam elements that include the modes of longitudinal warping and of transverse distortion of cross section. Deformations due to shear forces and transverse bimoment are included, and it is found that the well-known spurious shear stiffness in very slender beams is eliminated by virtue of the fact that the interpolation polynomials for transverse displacements and for longitudinal displacements (due to rotations and warping) are linear and quadratic, respectively, and an interior mode is used. The element is treated as a mapped image of one parent unit element and the stiffness matrix is in integration in three dimensions, which is numerical in general, but could be carried out explicitly in special cases. Numerical examples of deformation of horizontally curved bridge girders, and of lateral buckling of box arches, as well as straight girders, validate the formulation and indicate good agreement with solutions by other methods.

[1]  V. Vlasov.  Thin-walled elastic beams , 1961 .

[2]  Mahjoub El Nimeiri,et al.  Large-Deflection Spatial Buckling of Thin-Walled Beams and Frames , 1973 .

[3]  K. C. Rockey,et al.  Developments in bridge design and construction : [proceedings of the International Conference on Developments in Bridge Design and Construction held at the University College, Cardiff, 29 March to 2 April 1971] , 1971 .

[4]  Ivar Holand,et al.  Finite element methods in stress analysis , 1969 .

[5]  A. C. Scordelis,et al.  Stresses in Continuous Concrete Box Girder Bridges , 1971 .

[6]  A. B. Sabir,et al.  A comparison of curved beam finite elements when used in vibration problems , 1971 .

[7]  Zdenek P. Bazant,et al.  A correlation study of formulations of incremental deformation and stability of continuous bodies , 1971 .

[8]  A C Scordelis,et al.  COMPUTER PROGRAM FOR NON-PRISMATIC FOLDED PLATES WITH PLATE AND BEAM ELEMENTS , 1970 .

[9]  O. Zienkiewicz.  The Finite Element Method In Engineering Science , 1971 .

[10]  Y. K. Cheung.  Analysis of Box Girder Bridges by the Finite Strip Method , 1971 .

[11]  Y. Cheung,et al.  Analysis of Curved Box Girder Bridges by Finite Strip Method , 1971 .

[12]  F Roll,et al.  AN EXPERIMENTAL AND ANALYTICAL INVESTIGATION OF A HORIZONTALLY CURVED BOX-BEAM HIGHWAY BRIDGE MODEL , 1969 .

[13]  Alexander C. Scordelis,et al.  ANALYSIS OF CURVED FOLDED PLATE STRUCTURES , 1970 .

[14]  A. Scordelis,et al.  Direct Stiffness Solution for Folded Plates , 1964 .

[15]  V Kristeck.  Tapered Box Girders of Deformable Cross Section , 1970 .

[16]  D. G. Ashwell,et al.  Limitations of certain curved finite elements when applied to arches , 1971 .

[17]  W. R. Dean.  On the Theory of Elastic Stability , 1925 .

[18]  Dhirendra N. Buragohain,et al.  Analysis of Curved Box Girder Bridges , 1973 .

[19]  A C Scordelis.  ANALYTICAL SOLUTIONS FOR BOX GIRDER BRIDGES , 1971 .

[20]  K R Moffatt,et al.  FINITE ELEMENT ANALYSIS OF CURVED BOX GIRDER BRIDGES , 1971 .