Optimization and Characterization of the Friction Stir Welded Sheets of AA 5754-H111: Monitoring of the Quality of Joints with Thermographic Techniques

Friction Stir Welding (FSW) is a solid-state welding process, based on frictional and stirring phenomena, that offers many advantages with respect to the traditional welding methods. However, several parameters can affect the quality of the produced joints. In this work, an experimental approach has been used for studying and optimizing the FSW process, applied on 5754-H111 aluminum plates. In particular, the thermal behavior of the material during the process has been investigated and two thermal indexes, the maximum temperature and the heating rate of the material, correlated to the frictional power input, were investigated for different process parameters (the travel and rotation tool speeds) configurations. Moreover, other techniques (micrographs, macrographs and destructive tensile tests) were carried out for supporting in a quantitative way the analysis of the quality of welded joints. The potential of thermographic technique has been demonstrated both for monitoring the FSW process and for predicting the quality of joints in terms of tensile strength.

[1]  H. Bhadeshia,et al.  Recent advances in friction-stir welding : Process, weldment structure and properties , 2008 .

[2]  Michael Miles,et al.  Formability and strength of friction-stir-welded aluminum sheets , 2004 .

[3]  R. Mishraa,et al.  Friction Stir Welding And Processing , 2005 .

[4]  M. Ball,et al.  Characterisation of microstructure and texture in friction stir welded joints of 5754 and 5182 aluminium alloy sheets , 2001 .

[5]  Altino Loureiro,et al.  High speed friction stir welding of aluminium alloys , 2010 .

[6]  Antonio Domenico Ludovico,et al.  Effect of Friction Stir Process Parameters on the Mechanical and Thermal Behavior of 5754-H111 Aluminum Plates , 2016, Materials.

[7]  V. S. Senthil Kumar,et al.  Modelling and Optimization of Friction Stir Welding Parameters for Dissimilar Aluminium Alloys Using RSM , 2012 .

[8]  J. K. Paik,et al.  Mechanical Properties of Friction Stir Welded Aluminum Alloys 5083 and 5383 , 2009 .

[9]  M. N. James,et al.  Optimising FSW process parameters to minimise defects and maximise fatigue life in 5083-H321 aluminium alloy , 2008 .

[10]  V. Balasubramanian,et al.  Establishing relationships between mechanical properties of aluminium alloys and optimised friction stir welding process parameters , 2012 .

[11]  Yuh J. Chao,et al.  Heat Transfer in Friction Stir Welding—Experimental and Numerical Studies , 2003 .

[12]  J. Senkara,et al.  Cracking in spot welding aluminum alloy AA5754 , 2000 .

[13]  Jesper Henri Hattel,et al.  Thermal modelling of friction stir welding , 2008 .

[14]  Livia Maria Serio,et al.  Analisi del processo Friction Stir Welding applicato alla lega AA 5754 H111: comportamento meccanico e termico dei giunti , 2014 .

[15]  M. Preuss,et al.  Microstructure, mechanical properties and residual stresses as a function of welding speed in aluminium AA5083 friction stir welds , 2003 .

[16]  Moataz M. Attallah,et al.  Influence of base metal microstructure on microstructural development in aluminium based alloy friction stir welds , 2007 .

[17]  Jesper Henri Hattel,et al.  An analytical model for the heat generation in friction stir welding , 2004 .

[18]  Yuang-Cherng Chiou,et al.  Experimental study on temperature distributions within the workpiece during friction stir welding of aluminum alloys , 2008 .

[19]  Ghassan T. Kridli,et al.  Tensile and Fatigue Behavior of Friction-Stir Welded Tailor-Welded Blank of Aluminum Alloy 5754 , 2010 .

[20]  Mustafa Kemal Kulekci,et al.  Effects of tool rotation and pin diameter on fatigue properties of friction stir welded lap joints , 2008 .

[21]  J. Y. Sheikh-Ahmad,et al.  Thermal history and microstructure during friction stir welding of Al–Mg alloy , 2016 .

[22]  G. Rambabu,et al.  Optimization of friction stir welding parameters for improved corrosion resistance of AA2219 aluminum alloy joints , 2015 .

[23]  M. M. Shtrikman,et al.  Current state and development of friction stir welding Part 3. Industrial application of friction stir welding , 2008 .

[24]  D. Palumbo,et al.  Monitoring of the friction stir welding process by means of thermography , 2016 .

[25]  Kenichi Nakamura,et al.  On Friction Welding , 1966 .

[26]  Jean-Eric Masse,et al.  Friction stir welding of AZ31 magnesium alloy rolled sheets: Influence of processing parameters , 2009 .

[27]  Dong-Hwan Park,et al.  Friction stir welding of 5052 aluminum alloy plates , 2009 .

[28]  V. Balasubramanian,et al.  Influences of pin profile and rotational speed of the tool on the formation of friction stir processing zone in AA2219 aluminium alloy , 2007 .