论文信息 - Characterization of BSCCO 2212 bulk material for resistive current limiters

Characterization of BSCCO 2212 bulk material for resistive current limiters

It is demonstrated that melt cast processed (MCP) BSCCO 2212 bulk material is an excellent candidate for resistive superconducting current limiters. For rod shaped samples it could be shown that a homogeneous voltage of more than 1 V/cm can be established over the whole length of the sample leading to a substantial limiting of short circuit current. The require long lengths of superconducting material can be easily obtained by machining the MCP-tubes into (bifilar) coils. The measured critical current density and its homogeneity over these large lengths were determined and proven to be sufficient for the designated application.

[1] P. Tixador,et al. Current limitation at 1080 A under 1100 V with bulk Bi-2223 , 1999, IEEE Transactions on Applied Superconductivity.

[2] Jakob Rhyner,et al. Test of 1.2 MVA high- superconducting fault current limiter , 1997 .

[3] Wolfgang Schmidt,et al. Resistive fault current limiters with YBCO films 100 kVA functional model , 1999, IEEE transactions on applied superconductivity.

[4] Steffen Elschner,et al. High currents in MCP BSCCO 2212 bulk material , 1996 .

[5] J. Bock,et al. Melt cast processed (MCP)-BSCCO 2212 tubes for power applications up to 10 kA , 1995, IEEE Transactions on Applied Superconductivity.

[6] Mathias Noe,et al. Investigation of high-Tc bulk material for its use in resistive superconducting fault current limiters , 2001 .