The penetration of rigid long rods – revisited

Abstract The penetration process of rigid long rods with different nose shapes (ogive, spherical, conical and flat) is analyzed through a series of 2D numerical simulations. Aluminum and steel targets with different strengths (and large dimensions) are used to follow the deceleration process of these rods from impact, at different velocities, to the final penetration point. We find that for low impact velocities the deceleration of these rods is practicably constant, depending only on the strength of the target and the nose shape of the rod. Above a threshold (critical) impact velocity rod deceleration becomes velocity dependent due to the inertial response of the target. These critical velocities depend on the strength of the target and the nose shape of the rod. These observations led us to propose a simple penetration formula which accounts very well for penetration depths data for rigid steel rods with different nose shapes, impacting various aluminum targets at velocities up to about 1.5 km/s. For higher impact velocities, where the dynamic (inertial) contribution to the target resistance is important, we find good agreement between our model predictions and the simulation results for final penetration depths.

[1]  M. J. Forrestal,et al.  Penetration of Strain-Hardening Targets With Rigid Spherical-Nose Rods , 1991 .

[3]  N. Mott,et al.  The theory of indentation and hardness tests , 1945 .

[4]  R. Batra,et al.  Steady state penetration of rigid perfectly plastic targets , 1986 .

[5]  Rodney Hill,et al.  Cavitation and the influence of headshape in attack of thick targets by non-deforming projectiles† , 1980 .

[6]  Zvi Rosenberg,et al.  A numerical study of the cavity expansion process and its application to long-rod penetration mechanics , 2008 .

[7]  E. P. Chen.  Numerical simulation of penetration of aluminum targets by spherical-nose steel rods , 1995 .

[8]  M. J. Forrestal,et al.  Penetration of 7075-T651 aluminum targets with ogival-nose rods , 1992 .

[9]  A. Tate,et al.  A theory for the deceleration of long rods after impact , 1967 .

[10]  T. L. Warren,et al.  Penetration of 6061-T6511 aluminum targets by ogive-nose steel projectiles with striking velocities between 0.5 and 3.0 km/s , 1999 .

[11]  M. J. Forrestal,et al.  Penetration of 6061-T651 Aluminum Targets With Rigid Long Rods , 1988 .

[12]  D. B. Longcope,et al.  Penetration into ductile metal targets with rigid spherical-nose rods , 1995 .

[13]  Penetration equations for ogive-nose rods into aluminum targets , 2008 .

[14]  A. Tate,et al.  Long rod penetration models. I: A flow field model for high speed long rod penetration , 1986 .

[15]  M. J. Forrestal,et al.  Dynamic Spherical Cavity-Expansion in a Compressible Elastic-Plastic Solid , 1988 .

[16]  M. J. Forrestal,et al.  Penetration of concrete targets with ogive-nose steel rods , 1998 .

[17]  Mazen R. Tabbara,et al.  Simulations of the Penetration of 6061-T6511 Aluminum Targets by Spherical-Nosed VAR 4340 Steel Projectiles , 2000 .

[18]  T. Charlton.  Progress in Solid Mechanics , 1962, Nature.

[19]  Qingming Li,et al.  Deep penetration of a non-deformable projectile with different geometrical characteristics , 2002 .