Two-dimensional diffractive coherent combining of 15 fiber amplifiers into a 600 W beam.

We demonstrate coherent beam combining using a two-dimensionally patterned diffractive optic combining element. Fifteen Yb-doped fiber amplifier beams arranged in a 3×5 array were combined into a single 600 W, M²=1.1 output beam with 68% combining efficiency. Combining losses under thermally stable conditions at 485 W were found to be dominated by spatial mode-mismatch between the free space input beams, in quantitative agreement with calculations using the measured amplitude and phase profiles of the input beams.

[1]  Joshua E. Rothenberg,et al.  Advances and limitations in beam combination of kilowatt fiber amplifiers , 2010, Defense + Commercial Sensing.

[2]  Joshua E. Rothenberg,et al.  Perturbative analysis of coherent combining efficiency with mismatched lasers. , 2010, Optics express.

[3]  T. Shay,et al.  Theory of electronically phased coherent beam combination without a reference beam. , 2006, Optics express.

[4]  Bruce W. Shore,et al.  High-efficiency dielectric multilayer gratings optimized for manufacturability and laser damage threshold , 1996, Laser Damage.

[5]  P. Madasamy,et al.  Dual-Grating Spectral Beam Combination of High-Power Fiber Lasers , 2009, IEEE Journal of Selected Topics in Quantum Electronics.

[6]  T. Fan.  Laser beam combining for high-power, high-radiance sources , 2005, IEEE Journal of Selected Topics in Quantum Electronics.

[7]  T. J. Wagner,et al.  Fiber laser beam combining and power scaling progress: Air Force Research Laboratory Laser Division , 2012, Other Conferences.

[8]  Jens Limpert,et al.  High average power spectral beam combining of four fiber amplifiers to 8.2 kW. , 2011, Optics letters.

[9]  Mark E. Weber,et al.  Diffractive-optics-based beam combination of a phase-locked fiber laser array. , 2008, Optics letters.

[10]  J R Leger,et al.  Coherent laser addition using binary phase gratings. , 1987, Applied optics.

[11]  Tso Yee Fan,et al.  Diffractive coherent combining of a 2.5 kW fiber laser array into a 1.9 kW Gaussian beam. , 2012, Optics letters.