Ratchet-integrated pneumatic actuator (RIPA): a large-stroke soft linear actuator inspired by sarcomere muscle contraction

Pneumatic artificial muscles (PAMs) have a wide range of robotics applications, especially in soft robots, for their ability to generate linear force and displacement with the soft, lightweight, compact, and safe characteristics as well as high power densities. However, the compressibility of the air causes a spring-like behavior of PAMs, resulting in several common issues of limited stroke, load-dependent stroke lengths, difficulty in maintaining their length against disturbance, and necessity of accurate pressure control system. To address these issues, this study borrows inspiration from a biological soft linear actuator, a muscle, and proposes a ratchet-integrated pneumatic actuator (RIPA). Utilizing two pawls integrated at both ends of a McKibben muscle and a flexible rack inserted in the middle of the muscle, the RIPA achieves a large stroke length by accumulating displacements from multiple small strokes of the McKibben muscle by repeating the cycle of pressurization and depressurization. This cycle mimics the cross-bridge model of a sarcomere, a basic unit of a skeletal muscle, in which a muscle accumulates nanoscale strokes of myosin head motors to generate large strokes. The synergy between a PAM and the inspiration from a sarcomere enabled a large-stroke soft linear actuator that can generate independent strokes from loads. The proposed actuator is not only capable of maintaining its length against unexpected mechanical disturbances but also controllable with a relatively simple system. In this paper, we describe the design of the RIPA and provide analytical models to predict the stroke length and the period per cycle for actuation. We also present experimental results for characterization and comparison with model predictions.

[1]  Blake Hannaford,et al.  McKibben artificial muscles: pneumatic actuators with biomechanical intelligence , 1999, 1999 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (Cat. No.99TH8399).

[2]  Yong-Lae Park,et al.  Design of a Lightweight Soft Robotic Arm Using Pneumatic Artificial Muscles and Inflatable Sleeves. , 2017, Soft robotics.

[3]  A. Stewart,et al.  The myosin motor in muscle generates a smaller and slower working stroke at higher load , 2004, Nature.

[4]  H. Rodrigue,et al.  Origami-Based Vacuum Pneumatic Artificial Muscles with Large Contraction Ratios. , 2019, Soft robotics.

[5]  Gen Endo,et al.  Development of Giacometti Arm With Balloon Body , 2017, IEEE Robotics and Automation Letters.

[6]  Daniela Rus,et al.  Pouch Motors: Printable/inflatable soft actuators for robotics , 2014, 2014 IEEE International Conference on Robotics and Automation (ICRA).

[7]  SunXu,et al.  Pouch Motors: Printable Soft Actuators Integrated with Computational Design , 2015 .

[8]  Jian Zhu,et al.  Control of a muscle-like soft actuator via a bioinspired approach , 2018, Bioinspiration & biomimetics.

[9]  Frank L. Hammond,et al.  Sensorized pneumatic muscle for force and stiffness control , 2017, 2017 IEEE International Conference on Robotics and Automation (ICRA).

[10]  Blake Hannaford,et al.  Measurement and modeling of McKibben pneumatic artificial muscles , 1996, IEEE Trans. Robotics Autom..

[11]  Hee Doo Yang,et al.  Modeling and Analysis of a High-Displacement Pneumatic Artificial Muscle With Integrated Sensing , 2019, Front. Robot. AI.

[12]  C. David Remy,et al.  Contraction Sensing With Smart Braid McKibben Muscles , 2016, IEEE/ASME Transactions on Mechatronics.

[13]  Yong-Lae Park,et al.  Sensorized, Flat, Pneumatic Artificial Muscle Embedded with Biomimetic Microfluidic Sensors for Proprioceptive Feedback. , 2019, Soft robotics.

[14]  Stephen A. Morin,et al.  Using explosions to power a soft robot. , 2013, Angewandte Chemie.

[15]  Yong-Lae Park,et al.  Design, modeling, and control of pneumatic artificial muscles with integrated soft sensing , 2017, 2017 IEEE International Conference on Robotics and Automation (ICRA).

[16]  Matthew J Tyska,et al.  The myosin power stroke. , 2002, Cell motility and the cytoskeleton.

[17]  Takayuki Koizumi,et al.  Spring-damper model and articulation control of pneumatic artificial muscle actuators , 2011, 2011 IEEE International Conference on Robotics and Biomimetics.

[18]  Dirk Lefeber,et al.  The Concept and Design of Pleated Pneumatic Artificial Muscles , 2001 .

[19]  Kanji Inoue,et al.  Rubbertuators and applications for robots , 1988 .

[20]  Robert J. Wood,et al.  A 3D-printed, functionally graded soft robot powered by combustion , 2015, Science.

[21]  Yong-Lae Park,et al.  Design of flat pneumatic artificial muscles , 2017 .

[22]  Radhika Nagpal,et al.  Design and control of a bio-inspired soft wearable robotic device for ankle–foot rehabilitation , 2014, Bioinspiration & biomimetics.

[23]  K. Suzumori,et al.  Development of intelligent McKibben actuator with built-in soft conductive rubber sensor , 2005, The 13th International Conference on Solid-State Sensors, Actuators and Microsystems, 2005. Digest of Technical Papers. TRANSDUCERS '05..

[24]  Bram Vanderborght,et al.  Third–Generation Pleated Pneumatic Artificial Muscles for Robotic Applications: Development and Comparison with McKibben Muscle , 2012, Adv. Robotics.

[25]  Shuichi Wakimoto,et al.  Flexible artificial muscle by bundle of McKibben fiber actuators , 2011, 2011 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM).

[26]  Ja Choon Koo,et al.  Sliding Filament Joint Mechanism: Biomimetic Artificial Joint Mechanism for Artificial Skeletal Muscles , 2019, Journal of Mechanisms and Robotics.

[27]  Taro Nakamura,et al.  Position and Force Control Based on Mathematical Models of Pneumatic Artificial Muscles Reinforced by Straight Glass Fibers , 2007, Proceedings 2007 IEEE International Conference on Robotics and Automation.

[28]  Dirk Lefeber,et al.  Pneumatic artificial muscles: Actuators for robotics and automation , 2002 .

[29]  Hugo Rodrigue,et al.  Design of Paired Pouch Motors for Robotic Applications , 2018, Advanced Materials Technologies.