Mechanochemical synthesis of Ti(C,N) nanopowder from titanium and melamine

[1]  O. Torabi,et al.  A study on mechanochemical behavior of MoO3–Mg–C to synthesize molybdenum carbide , 2014 .

[2]  B. Nasiri-Tabrizi,et al.  Formation and stability of tungsten boride nanocomposites in WO3–B2O3–Mg ternary system: Mechanochemical effects , 2014 .

[3]  A. Sobczak-Kupiec,et al.  Mechanochemical synthesis and investigations of calcium titanate powders and their acrylic dispersions , 2014 .

[4]  S. Bourbigot,et al.  Decomposition mechanism of melamine borate in pyrolytic and thermo-oxidative conditions , 2014 .

[5]  Shinhoo Kang,et al.  Material properties and tool performance of Ti-based solid solution cermets for micro end-mill applications , 2013 .

[6]  H. Eshghi,et al.  Formation of nanocrystalline h-AlN during mechanochemical decomposition of melamine in the presence of metallic aluminum , 2012 .

[7]  Mingzhi Wang,et al.  Synthesis of Ti(CN) powders by combustion reaction from Ti powder and a novel carbon–nitrogen precursor , 2011 .

[8]  J. M. Córdoba,et al.  Spark plasma sintering of ultrafine TiCxN1−x powders synthesized by a mechanically induced self-sustaining reaction , 2010 .

[9]  B. Liang,et al.  Synthesis of titanium nitride powders by reactive ball milling of titanium and urea , 2009 .

[10]  M. Razavi,et al.  Synthesis of TiC nanocomposite powder from impure TiO2 and carbon black by mechanically activated sintering , 2008 .

[11]  B. Basu,et al.  Crater wear mechanisms of TiCN–Ni–WC cermets during dry machining , 2007 .

[12]  Yufeng Zheng,et al.  Characterization of TiN, TiC and TiCN coatings on Ti-50.6 at.% Ni alloy deposited by PIII and deposition technique , 2007 .

[13]  M. Mozetič,et al.  XPS study of the deposited Ti layer in a magnetron-type sputter ion pump , 2006 .

[14]  H. Yang,et al.  Cutting performances, mechanical property and microstructure of ultra-fine grade Ti(C, N)-based cermets , 2006 .

[15]  J. M. Córdoba,et al.  Synthesis of Titanium Carbonitride Phases by Reactive Milling of the Elemental Mixed Powders , 2005 .

[16]  Ning Liu,et al.  The milling performances of TiC-based cermet tools with TiN nanopowders addition against normalized medium carbon steel AISI1045 , 2005 .

[17]  A. Bellosi,et al.  Factors influencing the milling performances of Ti(C,N)-based tools against carbon steel , 2001 .

[18]  Yong Huang,et al.  Synthesis of Ti(C,N) ultrafine powders by carbothermal reduction of TiO2 derived from sol–gel process , 2000 .

[19]  M. Nygren,et al.  Synthesis of TiNxC1−x whiskers , 1999 .

[20]  A. Jha,et al.  Formation of titanium carbonitride phases via the reduction of TiO2 with carbon in the presence of nitrogen , 1999 .

[21]  E. Baburaj,et al.  Preparation of Ni powder by mechanochemical process , 1997 .

[22]  Z. A. Munir,et al.  The mechanism of combustion synthesis of titanium carbonitride , 1994 .

[23]  H. Pastor.  Titanium-carbonitride-based hard alloys for cutting tools , 1988 .