Calculating the Anisotropic Permeability of Porous Media Using the Lattice Boltzmann Method and X-ray Computed Tomography

A lattice Boltzmann (LB) method is developed in this article in a combination with X-ray computed tomography to simulate fluid flow at pore scale in order to calculate the anisotropic permeability of porous media. The binary 3D structures of porous materials were acquired by X-ray computed tomography at a resolution of a few microns, and the reconstructed 3D porous structures were then combined with the LB model to calculate their permeability tensor based on the simulated velocity field at pore scale. The flow is driven by pressure gradients imposed in different directions. Two porous media, one gas diffusion porous layer used in fuel cells industry and glass beads, were simulated. For both media, we investigated the relationship between their anisotropic permeability and porosity. The results indicate that the LB model is efficient to simulate pore-scale flow in porous media, and capable of giving a good estimate of the anisotropic permeability for both media. The calculated permeability is in good agreement with the measured date; the relationship between the permeability and porosity for the two media is well described by the Kozeny–Carman equation. For the gas diffusion layer, the simulated results showed that its permeability in one direction could be one order of magnitude higher than those in other two directions. The simulation was based on the single-relaxation time LB model, and we showed that by properly choosing the relaxation time, it could give similar results to those obtained using the multiple-relaxation time (MRT) LB method, but with only one third of the computational costs of MRTLB model.

[1]  James G. Berryman,et al.  Use of digital image analysis to estimate fluid permeability of porous materials: Application of two-point correlation functions , 1986 .

[2]  John W. Crawford,et al.  Determination of soil hydraulic conductivity with the lattice Boltzmann method and soil thin-section technique , 2005 .

[3]  Arezou Jafari,et al.  Simulation of Fluid Flow Through a Granular Bed , 2006 .

[4]  R. Horne,et al.  Generalized Macroscopic Models for Fluid Flow in Deformable Porous Media I: Theories , 2001 .

[5]  William J. Bosl,et al.  A study of porosity and permeability using a lattice Boltzmann simulation , 1998 .

[6]  Xiaoxian Zhang,et al.  Change in macroscopic concentration at the interface between different materials: Continuous or discontinuous , 2010 .

[7]  A. Costa,et al.  Permeability‐porosity relationship: A reexamination of the Kozeny‐Carman equation based on a fractal pore‐space geometry assumption , 2006 .

[8]  Abolfazl Shamsai,et al.  FINITE VOLUME DISCRETIZATION OF FLOW IN POROUS MEDIA BY THE MATLAB SYSTEM , 2004 .

[9]  Shiyi Chen,et al.  LATTICE BOLTZMANN METHOD FOR FLUID FLOWS , 2001 .

[10]  M. M. Tomadakis,et al.  Viscous Permeability of Random Fiber Structures: Comparison of Electrical and Diffusional Estimates with Experimental and Analytical Results , 2005 .

[11]  D. d'Humières,et al.  Multiple–relaxation–time lattice Boltzmann models in three dimensions , 2002, Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[12]  Lian-Ping Wang,et al.  Modeling fluid flow in fuel cells using the lattice-Boltzmann approach , 2006, Math. Comput. Simul..

[13]  Xianguo Li,et al.  Application of lattice Boltzmann method to a micro-scale flow simulation in the porous electrode of a PEM fuel cell , 2007 .

[14]  Q. Zou,et al.  On pressure and velocity boundary conditions for the lattice Boltzmann BGK model , 1995, comp-gas/9611001.

[15]  Wilson K. S. Chiu,et al.  Lattice Boltzmann modeling of 2D gas transport in a solid oxide fuel cell anode , 2007 .

[16]  W. E. Soll,et al.  Pore scale study of flow in porous media: Scale dependency, REV, and statistical REV , 2000 .

[17]  N. Caron,et al.  Gas Permeability of Porous Plasma-Sprayed Coatings , 2008, International Thermal Spray Conference.

[18]  Rui Chen,et al.  Multiscale Simulation of Single-Phase Multicomponent Transport in the Cathode Gas Diffusion Layer of a Polymer Electrolyte Fuel Cell , 2010 .

[19]  Liang Hao,et al.  Lattice Boltzmann simulations of anisotropic permeabilities in carbon paper gas diffusion layers , 2009 .

[20]  Rui Chen,et al.  3D reconstruction of a gas diffusion layer and a microporous layer , 2010 .

[21]  Y. Qian,et al.  Lattice BGK Models for Navier-Stokes Equation , 1992 .

[22]  R. Horne,et al.  Generalized Macroscopic Models for Fluid Flow in Deformable Porous Media II: Numerical Results and Applications , 2001 .

[23]  L. Luo,et al.  Analytic solutions of simple flows and analysis of nonslip boundary conditions for the lattice Boltzmann BGK model , 1997 .

[24]  J. Boon.  The Lattice Boltzmann Equation for Fluid Dynamics and Beyond , 2003 .

[25]  P. Lallemand,et al.  Momentum transfer of a Boltzmann-lattice fluid with boundaries , 2001 .

[26]  Jinsheng Xiao,et al.  Effects of porosity distribution variation on the liquid water flux through gas diffusion layers of PEM fuel cells , 2006 .

[27]  Cass T. Miller,et al.  An evaluation of lattice Boltzmann schemes for porous medium flow simulation , 2006 .

[28]  Ruben Juanes,et al.  A variational multiscale finite element method for multiphase flow in porous media , 2005 .

[29]  Ned Djilali,et al.  CFD-based modelling of proton exchange membrane fuel cells , 2005 .

[30]  Joanne T. Fredrich,et al.  Predicting macroscopic transport properties using microscopic image data , 2005 .

[31]  P. Rama,et al.  Determination of the anisotropic permeability of a carbon cloth gas diffusion layer through X‐ray computer micro‐tomography and single‐phase lattice Boltzmann simulation , 2011 .

[32]  Xianguo Li,et al.  Multi-phase micro-scale flow simulation in the electrodes of a PEM fuel cell by lattice Boltzmann method , 2008 .

[33]  Aaron I. Packman,et al.  Pore‐scale analysis of permeability reduction resulting from colloid deposition , 2008 .

[35]  B. D. Kandhai,et al.  Hydraulic permeability of (un)bounded fibrous media using the lattice boltzmann method , 2000, Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics.