ProDOT-Based Polymers: From Energy Storage to Smart Window Applications

Nowadays, electroactive materials based on conjugated polymers for energy storage and electrochromic window applications attract large interest due to their low cost, accessible synthetic procedures, and interesting electrochemical properties. Herein, we report on the performance of two propylenedioxythiophene (ProDOT)-based polymers having varying length and functionality side chains, which were explored to assess their potential for these applications. The polymers were obtained by oxidative chemical polymerization and processed from organic solvents into thin coatings with different molecular assemblies. Preliminary studies on their chemical structure and optical and electrochemical characteristics were performed to evidence how these are influenced by the side chain substituent nature. When tested as electrode material in the three-electrode cell configuration, the synthesized ProDOT-based polymers provided the highest specific areal capacitance of 1.059 mF/cm2 at a scan rate of 10 mV/s and 0.538 mF/cm2 at 0.01 mA/cm2 in cyclic voltammetry and galvanostatic charge–discharge measurements, respectively. One of the polymers showed electrochromic response, with ultrafast color change from deep purple to highly transmissive green/blue. A coloration efficiency of 123 cm2/C and a maximum CE decay of 9.9% after 100 cycles was achieved for this material, which is also able to efficiently store electrical charge, thus demonstrating potential for use in energy storage smart window applications where the energy level can be estimated by simple visual observation.

[1]  Daeho Lee,et al.  Recent Developments and Implementations of Conductive Polymer-Based Flexible Devices in Sensing Applications , 2022, Polymers.

[2]  K. Wolski,et al.  Ladder-like Polymer Brushes Containing Conjugated Poly(Propylenedioxythiophene) Chains , 2022, International journal of molecular sciences.

[3]  Xueliang Li,et al.  A comprehensive overview of common conducting polymer-based nanocomposites; Recent advances in design and applications , 2021, European Polymer Journal.

[4]  J. Irvin,et al.  Enabling Conducting Polymer Applications: Methods for Achieving High Molecular Weight in Chemical Oxidative Polymerization in Alkyl- and Ether-Substituted Thiophenes , 2021, Materials.

[5]  C. Rout,et al.  Conducting polymers: a comprehensive review on recent advances in synthesis, properties and applications , 2021, RSC advances.

[6]  N. R. Khalid,et al.  Enhanced electrochemical performance of MoS2/PPy nanocomposite as electrodes material for supercapacitor applications , 2020, Journal of Materials Science: Materials in Electronics.

[7]  J. Eckert,et al.  Oligoether Ester-Functionalized ProDOT Copolymers on Si/Monolayer Graphene as Capacitive Thin Film Electrodes , 2020 .

[8]  Eunkyoung Kim,et al.  Electrochromic Conjugated Polymers for Multifunctional Smart Windows with Integrative Functionalities , 2020, Advanced Materials Technologies.

[9]  Jianguo Mei,et al.  Conjugated electrochromic polymers with amide-containing side chains enabling aqueous electrolyte compatibility , 2020 .

[10]  M. G. Ersozoglu A Novel Dioxythiophene Based Conducting Polymer as Electrode Material for Supercapacitor Application , 2019, International Journal of Electrochemical Science.

[11]  J. Reynolds,et al.  All Donor Electrochromic Polymers Tunable across the Visible Spectrum via Random Copolymerization , 2019, Chemistry of Materials.

[12]  Ravinder Dahiya,et al.  Graphene–Graphite Polyurethane Composite Based High‐Energy Density Flexible Supercapacitors , 2019, Advanced science.

[13]  K. Cai,et al.  Free-standing and highly conductive PEDOT nanowire films for high-performance all-solid-state supercapacitors , 2019, Journal of Materials Chemistry A.

[14]  J. Reynolds,et al.  Balancing Charge Storage and Mobility in an Oligo(Ether) Functionalized Dioxythiophene Copolymer for Organic‐ and Aqueous‐ Based Electrochemical Devices and Transistors , 2018, Advanced materials.

[15]  Jingkun Xu,et al.  Supercapacitor properties of nanowire poly((3,4-dihydro-2H-thieno[3,4-b][1,4]dioxepin-3-yl)methanol) free-supporting films , 2018, Electrochimica Acta.

[16]  G. Schreckenbach,et al.  Polythiophene: From Fundamental Perspectives to Applications , 2017 .

[17]  Ayesha Kausar Overview on conducting polymer in energy storage and energy conversion system , 2017 .

[18]  B. K. Sikder A step towards the processability of insoluble or partially soluble functional and structural variants of polymers based on 3,4-alkylenedioxythiophene , 2016 .

[19]  N. C. Shivaprakash,et al.  Fabrication of fast switching electrochromic window based on poly(3,4-(2,2-dimethylpropylenedioxy)thiophene) thin film , 2016, Journal of Materials Science: Materials in Electronics.

[20]  David C. Martin,et al.  Post-polymerization functionalization of poly(3,4-propylenedioxythiophene) (PProDOT) via thiol-ene "click" chemistry. , 2015, Journal of materials chemistry. B.

[21]  Jingkun Xu,et al.  Electrochemical preparation of poly(2,3-dihydrothieno[3,4-b][1,4]dioxin-2-yl)methanol)/carbon fiber core/shell structure composite and its high capacitance performance , 2015 .

[22]  B. Schulz,et al.  An easily functionalizable oligo(oxyethylene)- and ester-substituted poly(3,4-propylenedioxythiophene) derivative exhibiting alkali metal ion response , 2014 .

[23]  Jianhua Xu,et al.  Electrochemical performance of graphene-polyethylenedioxythiophene nanocomposites , 2013 .

[24]  A. L. Dyer,et al.  Fast switching water processable electrochromic polymers. , 2012, ACS applied materials & interfaces.

[25]  A. Sarac,et al.  Impedance and morphology of hydroxy- and chloro-functionalized poly(3,4-propylenedioxythiophene) nanostructures. , 2012, Journal of nanoscience and nanotechnology.

[26]  Kuo-Chuan Ho,et al.  A dye-sensitized photo-supercapacitor based on PProDOT-Et2 thick films , 2010 .

[27]  A. Sarac,et al.  Electrochemically polymerized 2,2-dimethyl-3,4-propylenedioxythiophene on carbon fiber for microsupercapacitor , 2007 .

[28]  J. Reynolds,et al.  Defunctionalization of Ester-Substituted Electrochromic Dioxythiophene Polymers , 2007 .

[29]  Jenq-Neng Hwang,et al.  Multicolored Electrochromism in Polymers: Structures and Devices , 2004 .

[30]  Anilesh Kumar,et al.  Synthesis and characterization of functionalized 3,4-propylenedioxythiophene and its derivatives , 2004 .

[31]  J. Reynolds,et al.  Electrochemistry of Poly(3,4‐alkylenedioxythiophene) Derivatives , 2003 .

[32]  R. Nolte,et al.  Poly(3,4-ethylenedioxythiophene)-based copolymers for biosensor applications , 2002 .

[33]  Hongming Zhang,et al.  Recent advances in multifunctional electrochromic energy storage devices and photoelectrochromic devices , 2016, Science China Chemistry.