Grain boundary design and control for high temperature materials
暂无分享,去创建一个
[1] J. Howe,et al. Grain-boundary precipitation in an Al4.0Cu0.5Mg0.5Ag alloy , 1992 .
[2] L. Qing,et al. On deformation-induced continuous recrystallization in a superplastic AlLiCuMgZr alloy , 1992 .
[3] R. Valiev,et al. Modelling of grain boundary misorientation spectrum in polycrystals with crystallographic texture , 1992 .
[4] T. Chuang,et al. Grain boundary pest of boron- doped Niin3Al at 1200 °C , 1991 .
[5] P. J. King,et al. Grain boundary design and control for intergranular stress-corrosion resistance , 1991 .
[6] R. Cook,et al. Alternative length scales for polycrystalline materials—II. cluster morphology , 1991 .
[7] D. A. Smith,et al. Alternative length scales for polycrystalline materials. I, Microstructure evolution , 1991 .
[8] Tadao Watanabe,et al. Grain boundary strengthening associated with Σ = 9 near-coincidence boundary in 〈1010〉 twist zinc bicrystals at high temperatures , 1991 .
[9] J. Weertman,et al. Interrelationships among grain boundaries, cavitation and dislocation structure in Cu-15 at .%Al fatigued at high temperatures , 1991 .
[10] Tadao Watanabe. Grain Boundary Design for the Control of Intergranular Fracture , 1991 .
[11] T. Hirano,et al. Improvement of Room Temperature Ductility of Stoichiometric Ni3Al by Unidirectional Solidification , 1990 .
[12] H. Oikawa,et al. The effects of magnetic annealing on recrystallization and grain-boundary character distribution (GBCD) in iron-cobalt alloy polycrystals , 1990 .
[13] A. Garbacz,et al. Modelling of CSL boundaries distribution in polycrystals , 1989 .
[14] L. Lim,et al. Grain boundary character distribution controlled toughness of polycrystals — A two-dimensional model , 1989 .
[15] K. Arai,et al. Grain boundaries in rapidly solidified and annealed Fe-6.5 mass% Si polycrystalline ribbons with high ductility , 1989 .
[16] T. Langdon,et al. A determination of the structural dependence of cyclic migration in polycrystalline aluminum using electron channeling pattern analysis , 1989 .
[17] K. Yoshimi,et al. Texture and grain boundary character distribution (GBCD) in rapidly solidified and annealed Fe-6.5 mass% Si ribbons , 1989 .
[18] John W. Hutchinson,et al. Microcrack toughening in alumina/zirconia , 1987 .
[19] S. Majumdar,et al. Creep cavitation and grain boundary structure in type 304 stainless steel , 1986 .
[20] W. Świątnicki,et al. Investigation of grain boundary diffusion in polycrystals by means of extrinsic grain boundary dislocations spreading rate , 1986 .
[21] B. Straumal,et al. Regions of existence of special and non-special grain boundaries , 1985 .
[22] C. Woo. Polycrystalline effects on irradiation creep and growth in textured zirconium , 1985 .
[23] Michael P. Anderson,et al. Computer simulation of grain growth—IV. Anisotropic grain boundary energies , 1985 .
[24] Tadao Watanabe,et al. The effect of a grain boundary structural transformation on sliding in -tilt zinc bicrystals , 1984 .
[25] Hsun Hu,et al. Cube-textured stainless steel and some of its properties , 1984 .
[26] R. Raj,et al. Effect of boundary structure on slip-induced cavitation in polycrystalline nickel , 1984 .
[27] W. Bollmann. Triple lines in polycrystalline aggregates as disclinations , 1984 .
[28] R. C. Gifkins,et al. Cyclic grain boundary migration during high temperature fatigue--I: microstructural observations , 1983 .
[29] Tadao Watanabe. Grain boundary sliding and stress concentration during creep , 1983 .
[30] H. Fukutomi,et al. GRAIN BOUNDARY SLIDING WITH AND WITHOUT MATRIX SLIP DEFORMATION IN CADMIUM BICRYSTALS. , 1982 .
[31] H. Kokawa,et al. Sliding behaviour and dislocation structures in aluminium grain boundaries , 1981 .
[32] T. Langdon. Observations on the magnitude of grain boundary sliding in Region 1 of superplasticity , 1981 .
[33] Tadao Watanabe,et al. Intergranular fracture at migrating and sliding grain boundaries in an alpha iron - tin alloy , 1981 .
[34] S. Kitamura,et al. Grain boundary hardening and segregation in alpha Iron-Tin alloy , 1980 .
[35] A. Evans,et al. High temperature failure mechanisms in ceramics , 1980 .
[36] Tadao Watanabe,et al. Misorientation dependence of grain boundary sliding in 〈1010〉 tilt zinc bicrystals , 1979 .
[37] R. Varin. Spreading of Extrinsic Grain Boundary Dislocations in Austenitic Steel , 1979, March 16.
[38] Tadao Watanabe,et al. Grain boundary sliding and intergranular fracture behaviour of copper bicrystals , 1978 .
[39] K. T. Aust,et al. Effect of solute and orientation on the mobility of near-coincidence tilt boundaries in high-purity aluminum , 1975 .
[40] D. Taplin,et al. An investigation of the nucleation of creep cavities by 1 MV electron microscopy , 1975 .
[41] J. Silcock,et al. Grain boundary dislocations in aluminium bicrystals after high-temperature deformation , 1973 .
[42] W. Bollmann. Crystal Defects and Crystalline Interfaces , 1970 .
[43] J. Rutter,et al. Migration of 〈100〉 tilt grain boundaries in high purity lead , 1965 .
[44] R. King,et al. Mechanical Behaviour of Crystal Boundaries in Metals , 1948, Nature.
[45] N. Stoloff,et al. Physical and mechanical metallurgy of Ni3Al and its alloys , 1989 .
[46] K. Sickafus,et al. Grain boundary structural transformations induced by solute segregation , 1987 .
[47] J. Jonas,et al. Strength of metals and alloys , 1985 .
[48] Tohru Takahashi,et al. Coupling of Grain Boundary Migration and Sliding in Coincidence Boundary of Zn Bicrystal as an Evidence of DSC Dislocation Model , 1984 .
[49] H. Evans. Mechanisms of creep fracture , 1984 .
[50] N. L. Peterson. Grain-boundary diffusion in metals , 1983 .
[51] D. A. Smith,et al. On the role of grain boundary dislocations in high temperature creep , 1978 .
[52] P. Lagarde,et al. Fluage intergranulaire de bicristaux symétriques de flexion autour de 〈100〉 dans l'aluminium , 1974 .