Evaluation of wear in rolling contact tests by means of 2D image analysis

[1]  J. Archard.  Contact and Rubbing of Flat Surfaces , 1953 .

[2]  M. Meywerk,et al.  Polygonalization of railway wheels , 1999 .

[3]  Thomas Klinger,et al.  Image Processing with LabVIEW and IMAQ Vision , 2003 .

[4]  U. Olofsson,et al.  Wear, plastic deformation and friction of two rail steels—a full-scale test and a laboratory study , 2003 .

[5]  T. Stolarski.  Modern Tribology Handbook , 2003 .

[6]  Bülent Sankur,et al.  Survey over image thresholding techniques and quantitative performance evaluation , 2004, J. Electronic Imaging.

[7]  E. Kabo,et al.  Fatigue of railway wheels and rails under rolling contact and thermal loading—an overview , 2005 .

[8]  Roberto Roberti,et al.  The competitive role of wear and RCF in a rail steel , 2005 .

[9]  Bijan Shirinzadeh,et al.  An evaluation of surface roughness parameters measurement using vision-based data , 2007 .

[10]  B. Dhanasekar,et al.  Assessment of surface roughness based on super resolution reconstruction algorithm , 2008 .

[11]  Candida Petrogalli,et al.  Competition between wear and rolling contact fatigue at the wheel—rail interface: some experimental evidence on rail steel , 2009 .

[12]  Hasan Öktem,et al.  Measurement of surface roughness of metals using binary speckle image analysis , 2010 .

[13]  Candida Petrogalli,et al.  Progressive damage assessment in the near-surface layer of railway wheel–rail couple under cyclic contact , 2011 .

[14]  Yiin Kuen Fuh,et al.  Roughness measurement of metals using a modified binary speckle image and adaptive optics , 2012 .

[15]  Reinhard Pippan,et al.  A novel laboratory test rig for probing the sensitivity of rail steels to RCF and wear – first experimental results , 2014 .

[16]  Gürcan Samtaş,et al.  Measurement and evaluation of surface roughness based on optic system using image processing and artificial neural network , 2014 .

[17]  C. Petrogalli,et al.  An integrated model for competitive damage mechanisms assessment in railway wheel steels , 2015 .

[18]  C. Petrogalli,et al.  Using vibration measurements to detect high wear rates in rolling contact fatigue tests , 2015 .

[19]  Aiqiang Zhang,et al.  A study of spur gear pitting under EHL conditions: Theoretical analysis and experiments , 2016 .

[20]  G Sansoni,et al.  A novel optical apparatus for the study of rolling contact wear/fatigue based on a high-speed camera and multiple-source laser illumination. , 2016, The Review of scientific instruments.

[21]  Roger Lewis,et al.  Wear and damage transitions of wheel and rail materials under various contact conditions , 2016 .

[22]  Simone Pasinetti,et al.  Feasibility study of a vision system for on-line monitoring of rolling contact fatigue tests , 2017 .

[23]  C. Petrogalli,et al.  Effect of desert sand on wear and rolling contact fatigue behaviour of various railway wheel steels , 2018 .