The effect of powder oxidation on defect formation in laser additive manufacturing

[1]  Julian R. Jones,et al.  Laser-matter interactions in additive manufacturing of stainless steel SS316L and 13-93 bioactive glass revealed by in situ X-ray imaging , 2018, Additive Manufacturing.

[2]  A. Phillion,et al.  The influence of nanoparticles on dendritic grain growth in Mg alloys , 2018, Acta Materialia.

[3]  Kamel Fezzaa,et al.  Transient dynamics of powder spattering in laser powder bed fusion additive manufacturing process revealed by in-situ high-speed high-energy x-ray imaging , 2018, Acta Materialia.

[4]  Michael F Toney,et al.  An instrument for in situ time-resolved X-ray imaging and diffraction of laser powder bed fusion additive manufacturing processes. , 2018, The Review of scientific instruments.

[5]  P. Withers,et al.  In situ X-ray imaging of defect and molten pool dynamics in laser additive manufacturing , 2018, Nature Communications.

[6]  Kenneth W. Dalgarno,et al.  An overview of powder granulometry on feedstock and part performance in the selective laser melting process , 2017 .

[7]  E. Garboczi,et al.  Effect of powder oxidation on the impact toughness of electron beam melting Ti-6Al-4V , 2017 .

[8]  M. Matthews,et al.  Metal vapor micro-jet controls material redistribution in laser powder bed fusion additive manufacturing , 2017, Scientific Reports.

[9]  A. Rollett,et al.  Real-time monitoring of laser powder bed fusion process using high-speed X-ray imaging and diffraction , 2017, Scientific Reports.

[10]  Di Wang,et al.  Mechanisms and characteristics of spatter generation in SLM processing and its effect on the properties , 2017 .

[11]  Johannes Schindelin,et al.  TrackMate: An open and extensible platform for single-particle tracking. , 2017, Methods.

[12]  Khairul Amilin Ibrahim,et al.  Electrical conductivity and porosity in stainless steel 316L scaffolds for electrochemical devices fabricated using selective laser sintering , 2016 .

[13]  D. Gu,et al.  Role of melt behavior in modifying oxidation distribution using an interface incorporated model in selective laser melting of aluminum-based material , 2016 .

[14]  Alexander M. Rubenchik,et al.  Denudation of metal powder layers in laser powder bed fusion processes , 2016 .

[15]  T. Pollock,et al.  Alloy design for aircraft engines. , 2016, Nature materials.

[16]  M. Granger Morgan,et al.  Policy needed for additive manufacturing. , 2016, Nature materials.

[17]  Matthias Markl,et al.  Multiscale Modeling of Powder Bed–Based Additive Manufacturing , 2016 .

[18]  Richard Leach,et al.  Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing , 2016 .

[19]  Moataz M. Attallah,et al.  Selective laser melting of Invar 36: Microstructure and properties , 2016 .

[20]  Di Wang,et al.  Investigation into spatter behavior during selective laser melting of AISI 316L stainless steel powder , 2015 .

[21]  Andrew T. Anderson,et al.  Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones , 2015, 1512.02593.

[22]  Jan Sijbers,et al.  Dynamic intensity normalization using eigen flat fields in X-ray imaging. , 2015, Optics express.

[23]  E. O. Olakanmi,et al.  A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties , 2015 .

[24]  Moataz M. Attallah,et al.  On the role of melt flow into the surface structure and porosity development during selective laser melting , 2015 .

[25]  Nicola Doebelin,et al.  Profex: a graphical user interface for the Rietveld refinement program BGMN , 2015, Journal of applied crystallography.

[26]  I. Todd,et al.  Reduction of micro-cracking in nickel superalloys processed by Selective Laser Melting: A fundamental alloy design approach , 2015 .

[27]  Reinhart Poprawe,et al.  Formation and reduction of hydrogen porosity during selective laser melting of AlSi10Mg , 2015 .

[28]  Robert L. Bowerman,et al.  Introduction to the Additive Manufacturing Powder Metallurgy Supply Chain , 2015 .

[29]  S. Katayama,et al.  Elucidation of melt flows and spatter formation mechanisms during high power laser welding of pure titanium , 2015 .

[30]  Galina Kasperovich,et al.  Improvement of fatigue resistance and ductility of TiAl6V4 processed by selective laser melting , 2015 .

[31]  Michael Drakopoulos,et al.  I12: the Joint Engineering, Environment and Processing (JEEP) beamline at Diamond Light Source , 2015, Journal of synchrotron radiation.

[32]  R. Hague,et al.  A Study on the Laser Spatter and the Oxidation Reactions During Selective Laser Melting of 316L Stainless Steel, Al-Si10-Mg, and Ti-6Al-4V , 2015, Metallurgical and Materials Transactions A.

[33]  Shawn P. Moylan,et al.  Measurement Science Needs for Real-time Control of Additive Manufacturing Powder Bed Fusion Processes , 2015 .

[34]  Philip J. Withers,et al.  Influence of processing conditions on strut structure and compressive properties of cellular lattice structures fabricated by selective laser melting , 2015 .

[35]  Michael R. Hespos,et al.  Metallurgical and Mechanical Evaluation of 4340 Steel Produced by Direct Metal Laser Sintering , 2015 .

[36]  Chandrika Kamath,et al.  Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing , 2014 .

[37]  I. Ashcroft,et al.  Reducing porosity in AlSi10Mg parts processed by selective laser melting , 2014 .

[38]  Casey R. Thurber,et al.  Synthesis of Nickel and Nickel Hydroxide Nanopowders by Simplified Chemical Reduction , 2014 .

[39]  P. Withers,et al.  Quantitative X-ray tomography , 2014 .

[40]  Moataz M. Attallah,et al.  Microstructure and tensile properties of selectively laser-melted and of HIPed laser-melted Ti–6Al–4V , 2013 .

[41]  Philip J. Withers,et al.  Assessment by X-ray CT of the effects of geometry and build direction on defects in titanium ALM parts , 2012 .

[42]  Kevin W Eliceiri,et al.  NIH Image to ImageJ: 25 years of image analysis , 2012, Nature Methods.

[43]  V. Tatarenko,et al.  Thermodynamics of f.c.c.-Ni–Fe Alloys in a Static Applied Magnetic Field , 2012 .

[44]  M. Strangwood,et al.  The effect of hydrogen on porosity formation during electron beam welding of titanium alloys , 2012 .

[45]  A. Kaplan,et al.  Spatter in laser welding , 2011 .

[46]  Gideon Levy,et al.  Influence of the particle size distribution on surface quality and mechanical properties in AM steel parts , 2011 .

[47]  Christopher J. Sutcliffe,et al.  Selective laser melting of aluminium components , 2011 .

[48]  Mark C. Biesinger,et al.  X-ray photoelectron spectroscopy studies of reactions on chromium metal and chromium oxide surfaces , 2011 .

[49]  J. Mazumder,et al.  Laser material processing: Fourth edition , 2010 .

[50]  Andrea R. Gerson,et al.  Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: Sc, Ti, V, Cu and Zn , 2010 .

[51]  C. Kleijn,et al.  The effect of oxygen on transitional Marangoni flow in laser spot welding , 2010 .

[52]  K. Mumtaz,et al.  Selective laser melting of Inconel 625 using pulse shaping , 2010 .

[53]  Alessandro Foi,et al.  Image Denoising by Sparse 3-D Transform-Domain Collaborative Filtering , 2007, IEEE Transactions on Image Processing.

[54]  F. Salvat,et al.  NIST databases with electron elastic‐scattering cross sections, inelastic mean free paths, and effective attenuation lengths , 2005 .

[55]  J. Brillo,et al.  Surface tension of nickel, copper, iron and their binary alloys , 2005 .

[56]  K. Nogi,et al.  Weld shape comparison with iron oxide flux and Ar–O2 shielding gas in gas tungsten arc welding , 2004 .

[57]  Tahar Laoui,et al.  Balling processes during selective laser treatment of powders , 2004 .

[58]  Abdolreza Simchi,et al.  Effects of laser sintering processing parameters on the microstructure and densification of iron powder , 2003 .

[59]  Manabu Tanaka,et al.  Weld Penetration and Marangoni Convection with Oxide Fluxes in GTA Welding. , 2002 .

[60]  R. Atwood,et al.  A three-phase model of hydrogen pore formation during the equiaxed dendritic solidification of aluminum-silicon alloys , 2002 .

[61]  D. See,et al.  Modeling microporosity in aluminum–silicon alloys: a review , 2001 .

[62]  Kenneth C. Mills,et al.  Marangoni effects in welding , 1998, Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[63]  A. Cramb,et al.  Surface tension and wettability studies of liquid Fe-Ni-O alloys , 1997 .

[64]  V. V. Semak,et al.  Melt pool dynamics during laser welding , 1995 .

[65]  S. Allen,et al.  SINGLE-PHASE SOLIDIFICATION DURING RAPID- RESOLIDIFICATION OF STAINLESS STEEL ALLOYS , 1990 .

[66]  R. M. Ward,et al.  Fluid and particle dynamics in laser powder bed fusion , 2018 .

[67]  Quang-Cuong Pham,et al.  Effect Of Inert Gas Flow Velocity And Unidirectional Scanning On The Formation And Accumulation Of Spattered Powder During Selective Laser Melting , 2016 .

[68]  John J. Lewandowski,et al.  Melt Pool Characterization for Selective Laser Melting of Ti-6Al-4V Pre-Alloyed Powder , 2014 .

[69]  S. Kohl,et al.  Influence of powder distribution on process stability in laser beam melting : Analysis of melt pool dynamics by numerical simulations , 2014 .

[70]  Meiko Boley,et al.  High-Speed X-Ray Analysis of Spatter Formation in Laser Welding of Copper , 2013 .

[71]  J. Kruth,et al.  Investigation on the inclusions in maraging steel produced by selective laser melting , 2012 .

[72]  L. Froyen,et al.  Fundamentals of Selective Laser Melting of alloyed steel powders , 2006 .

[73]  K. Osakada,et al.  Residual Stress within Metallic Model Made by Selective Laser Melting Process , 2004 .

[74]  Brian R. Strohmeier,et al.  An ESCA method for determining the oxide thickness on aluminum alloys , 1990 .