Alternative Methodologies for LiDAR System Calibration

Abstract: Over the last few years, LiDAR has become a popular technology for the direct acquisition of topographic information. In spite of the increasing utilization of this technology in several applications, its accuracy potential has not been fully explored. Most of current LiDAR calibration techniques are based on empirical and proprietary procedures that demand the system’s raw measurements, which may not be always available to the end-user. As a result, we can still observe systematic discrepancies between conjugate surface elements in overlapping LiDAR strips. In this paper, two alternative calibration procedures that overcome the existing limitations are introduced. The first procedure, denoted as ―Simplified method‖, makes use of the LiDAR point cloud from parallel LiDAR strips acquired by a steady platform (e.g., fixed wing aircraft) over an area with moderately varying elevation. The second procedure, denoted as ―Quasi-rigorous method‖, can deal with non-parallel strips, but requires time-tagged LiDAR point cloud and navigation data (trajectory position only) acquired by a steady platform. With the widespread adoption of LAS format and easy access to trajectory information, this data requirement is not a problem. The proposed methods can be applied in any type of terrain coverage without the need for control surfaces and are relatively easy to implement. Therefore, they can be used in every flight mission if needed. Besides, the proposed procedures require minimal interaction from the user, which can be completely eliminated after minor extension of the suggested procedure.

[1]  Derek D. Lichti,et al.  Rigorous approach to bore-sight self-calibration in airborne laser scanning , 2006 .

[2]  Jan Skaloud,et al.  Towards Automated LiDAR Boresight Self-calibration , 2007 .

[3]  F. Rottensteiner,et al.  The Automatic Extraction of Roads from LIDAR data , 2004 .

[4]  A. Habib,et al.  Photogrammetric and Lidar Data Registration Using Linear Features , 2005 .

[5]  Y. Tseng,et al.  LIDAR DATA SEGMENTATION AND CLASSIFICATION BASED ON OCTREE STRUCTURE , 2004 .

[6]  Gérard G. Medioni,et al.  Object modeling by registration of multiple range images , 1991, Proceedings. 1991 IEEE International Conference on Robotics and Automation.

[7]  Emmanuel P. Baltsavias,et al.  Airborne laser scanning: basic relations and formulas , 1999 .

[8]  A. Habib,et al.  Bundle Adjustment with Self–Calibration Using Straight Lines , 2002 .

[9]  Norbert Pfeifer,et al.  Automatic tie elements detection for laser scanner strip adjustment , 2005 .

[10]  Charles K. Toth,et al.  POINT POSITIONING ACCURACY OF AIRBORNE LIDAR SYSTEMS: A RIGOROUS ANALYSIS , 2007 .

[11]  Ayman Habib,et al.  Automatic surface matching for the registration of LIDAR data and MR imagery , 2006 .

[12]  Kurt Kubik,et al.  Relative and absolute orientation based on linear features , 1991 .

[13]  Aloysius Wehr,et al.  Airborne laser scanning—an introduction and overview , 1999 .

[14]  George Vosselman,et al.  STRIP OFFSET ESTIMATION USING LINEAR FEATURES , 2002 .

[15]  Ana Paula Kersting,et al.  Error budget of lidar systems and quality control of the derived data. , 2009 .

[16]  Qingde Li,et al.  Iterative closest geometric objects registration , 2000 .

[17]  H. Burman.  Calibration and orientation of airborne image and laser scanner data using GPS and INS , 2000 .

[18]  E. J. Huising,et al.  Errors and accuracy estimates of laser data acquired by various laser scanning systems for topographic applications , 1998 .

[19]  K. Kraus,et al.  ADVANCED DTM GENERATION FROM LIDAR DATA , 2001 .

[20]  C. Toth.  CALIBRATING AIRBORNE LIDAR SYSTEMS , 2002 .

[21]  S. Filin.  Recovery of Systematic Biases in Laser Altimetry Data Using Natural Surfaces , 2003 .

[22]  George Vosselman,et al.  Adjustment of airborne laser altimetry strips , 2004 .

[23]  A. Gruen,et al.  Least squares 3D surface and curve matching , 2005 .

[24]  C. Ghilani,et al.  Adjustment Computations: Statistics and Least Squares in Surveying and GIS , 1987 .

[25]  David Mulawa.  Estimation and photogrammetric treatment of linear features , 1989 .

[26]  Kresimir Kusevic,et al.  INTEGRATION OF TERRESTRIAL AND AIRBORNE LIDAR DATA FOR SYSTEM CALIBRATION , 2008 .

[27]  Frédéric Bretar,et al.  Full-waveform topographic lidar : State-of-the-art , 2009 .

[28]  Changno Lee,et al.  Extraction, modelling, and use of linear features for restitution of airborne hyperspectral imagery , 2004 .

[29]  Edward M. Mikhail,et al.  Observations And Least Squares , 1983 .

[30]  C. Glennie.  Rigorous 3D error analysis of kinematic scanning LIDAR systems , 2007 .

[31]  Zhengyou Zhang,et al.  Iterative point matching for registration of free-form curves and surfaces , 1994, International Journal of Computer Vision.

[32]  H. Maas.  Methods for measuring height and planimetry discrepancies in airborne laserscanner data , 2002 .

[33]  F. Ackermann.  Airborne laser scanning : present status and future expectations , 1999 .

[34]  Naser El-Sheimy,et al.  Digital terrain modeling - acquistion, manipulation, and applications , 2005 .

[35]  Kiyun Yu,et al.  Adjustment of Discrepancies Between LIDAR Data Strips Using Linear Features , 2007, IEEE Geoscience and Remote Sensing Letters.

[36]  Ayman Habib,et al.  Algorithms for Multi-sensor and Multi-primitive Photogrammetric Triangulation , 2007 .

[37]  Chris Rizos,et al.  Manual of Geospatial Science and Technology , 2009 .

[38]  K. Schnadt,et al.  UNIQUE AIRBORNE FIBER SCANNER TECHNIQUE FOR APPLICATION-ORIENTED LIDAR PRODUCTS , 2004 .

[39]  Sagi Filin.  Calibration of airborne and spaceborne laser altimeters using natural surfaces , 2001 .

[40]  Ana Paula Kersting,et al.  Estimation of biases in lidar system calibration parameters using overlapping strips , 2010 .

[41]  Emmanuel P. Baltsavias,et al.  Airborne laser scanning: existing systems and firms and other resources , 1999 .

[42]  Marc Pierrot Deseilligny,et al.  Solving the strip adjustment problem of 3D airborne lidar data , 2004, IGARSS 2004. 2004 IEEE International Geoscience and Remote Sensing Symposium.

[43]  D. Rabine,et al.  Georeferencing of airborne laser altimeter measurements , 1996 .

[44]  Ayman Habib,et al.  Surface Matching and Change Detection Using a Modified Hough Transformation for Robust Parameter Estimation , 2001 .

[45]  A. F. Habib,et al.  LIDAR STRIP ADJUSTMENT USING CONJUGATE LINEAR FEATURES IN OVERLAPPING STRIPS , 2008 .

[46]  Soon-Yong Park,et al.  An accurate and fast point-to-plane registration technique , 2003, Pattern Recognit. Lett..