XRD and XPS studies of surface MMC layers developed by laser alloying Ti-6Al-4V using a combination of a dilute nitrogen environment and SiC powder

[1]  Yun Tian,et al.  Research progress on laser surface modification of titanium alloys , 2005 .

[2]  Sunghak Lee,et al.  Correlation of microstructure and abrasive and sliding wear resistance of (TiC,SiC)/Ti-6Al-4V surface composites fabricated by high-energy electron-beam irradiation , 2004 .

[3]  T. N. Baker,et al.  XRD and XPS studies on surface MMC layer of SiC reinforced Ti–6Al–4V alloy , 2003 .

[4]  V. Ocelík,et al.  SiCp/Ti6Al4V functionally graded materials produced by laser melt injection , 2002 .

[5]  T. N. Baker,et al.  Study of the surface layer formed by the laser processing of Ti–6Al–4V alloy in a dilute nitrogen environment , 2001 .

[6]  T. N. Baker,et al.  Microstructural assessment of laser nitrided Ti-6Al-4V alloy , 2000 .

[7]  J. Ihm,et al.  A study of the formation of Ti(CN) solid solutions , 1999 .

[8]  T. N. Baker,et al.  The importance of preheat before laser nitriding a Ti–6Al–4V alloy , 1999 .

[9]  R. Rawlings,et al.  Nitride formation in titanium based substrates during laser surface melting in nitrogen–argon atmospheres , 1999 .

[10]  B. M. Burnside,et al.  X-ray photoelectron spectroscopic investigation of the durability of siloxane plasma polymer coatings in a steam atmosphere , 1998 .

[11]  T. N. Baker,et al.  Characterisation of sugar MMC layers developed in Ti-6AI-4V alloy using combination of SiCp and dilute nitrogen environment , 1998 .

[12]  S. Seal,et al.  Microscopy and electron spectroscopic study of the interfacial chemistry in Al–Ti alloy/graphite systems , 1998 .

[13]  Jie Liu,et al.  Microstructure and hardness distribution of laser surface overlap coating layer , 1998 .

[14]  T. N. Baker,et al.  Analysis of the phases developed by laser nitriding Ti6Al4V alloys , 1997 .

[15]  C. Fotakis,et al.  Growth of TiB2 and TiC coatings using pulsed laser deposition , 1997 .

[16]  T. N. Baker,et al.  Overlapping laser tracks to produce a continuous nitrided layer in Ti–6Al–4V alloy , 1997 .

[17]  T. N. Baker,et al.  Metal matrix composite layers formed by laser processing of commercial purity Ti–SiCp in nitrogen environment , 1996 .

[18]  J. D. Hosson,et al.  Microstructural characterization of laser nitrided titanium , 1995 .

[19]  J. Sullivan,et al.  Surface characterisation of plasma-nitrided titanium: an XPS study , 1995 .

[20]  E. Collings,et al.  Materials Properties Handbook: Titanium Alloys , 1994 .

[21]  T. N. Baker,et al.  Crack-free hard surfaces produced by laser nitriding of commercial purity titanium , 1994 .

[22]  P. Ettmayer,et al.  Lattice parameters and thermal expansion of Ti(CxN1−x), Zr(CxN1−x), Hf(CxN1−x) and TiN1−x from 298 to 1473 K as investigated by high-temperature X-ray diffraction , 1994 .

[23]  T. N. Baker,et al.  Design of surface in situ metal–ceramic composite formation via laser treatment , 1994 .

[24]  L. Gengembre,et al.  Characterization and optical properties of thin films formed on TiN coatings during electrochemical treatments , 1993 .

[25]  M. Seah,et al.  Practical Surface Analysis , 1992 .

[26]  T. N. Baker,et al.  Characteristic features of laser-nitrided surfaces of two titanium alloys , 1991 .

[27]  J. Abboud,et al.  Microstructure of titanium injected with SiC particles by laser processing , 1991 .

[28]  Joanne L. Murray,et al.  Phase diagrams of binary titanium alloys , 1987 .

[29]  P. H. Morton,et al.  Surface Engineering of Titanium with Nitrogen , 1986 .

[30]  W. Steen,et al.  Laser Surface Alloying of Titanium Substrates with Carbon and Nitrogen , 1985 .

[31]  J. D. Ayers,et al.  Abrasive wear with fine diamond particles of carbide-containing aluminum and titanium alloy surfaces , 1984 .

[32]  L. Porte,et al.  Vacancy effects in the x-ray photoelectron spectra of Ti N x , 1983 .

[33]  K. Ashbee,et al.  Epitaxial growth of rutile on oxidation of titanium carbide , 1962 .