Synthesis and characterization of collagen grafted poly(hydroxybutyrate-valerate) (PHBV) scaffold for loading of bovine serum albumin capped silver (Ag/BSA) nanoparticles in the potential use of tissue engineering application.

The objective of this study is to synthesize and characterize collagen grafted poly(3-hydroxylbutyrate-co-3-hydroxylvalerate) (PHBV) film for loading of BSA capped silver (Ag/BSA) nanoparticles. Thermal radical copolymerization and aminolysis methods were used to functionalize macroporous PHBV, followed by collagen grafting so as to formulate collagen-g-poly(hydroxyethylmethyl acrylate)-g-poly(3-hydroxylbutyrate-co-3-hydroxylvalerate) [collagen-g-PHEMA-g-PHBV] and collagen-g-aminated-poly(3-hydroxylbutyrate-co-3-hydroxylvalerate) [collagen-g-NH2-PHBV] films, respectively. Spectroscopic (FTIR, XPS), physical (SEM), and thermal (TGA) techniques were used to characterize the functionalized PHBV films. The amount of collagen present on grafted PHBV film was quantified by the Bradford method. The Ag/BSA nanoparticles were then loaded on collagen grafted and untreated PHBV films, and the nanoparticles loading were determined by atomic absorption spectrometry. The amount of nanoparticles loaded on collagen grafted PHBV film was found to be significantly greater than that on the untreated PHBV film. The nanoparticles loaded PHBV film can potentially serve as a scaffold to promote the growth of bone cells while inhibiting the bacterial growth.

[1]  D. Raghavan,et al.  SPR studies of the adsorption of silver/bovine serum albumin nanoparticles (Ag/BSA NPs) onto the model biological substrates. , 2013, Journal of colloid and interface science.

[2]  R. Salvarezza,et al.  Citrate-capped silver nanoparticles showing good bactericidal effect against both planktonic and sessile bacteria and a low cytotoxicity to osteoblastic cells. , 2013, ACS applied materials & interfaces.

[3]  D. Raghavan,et al.  Adsorption-desorption study of BSA conjugated silver nanoparticles (Ag/BSA NPs) on collagen immobilized substrates. , 2012, Langmuir : the ACS journal of surfaces and colloids.

[4]  Zhaoqiang Wu,et al.  Spectroscopic investigation of the interactions between gold nanoparticles and bovine serum albumin , 2012 .

[5]  D. Kothari,et al.  Study of Interaction of Silver Nanoparticles with Bovine Serum Albumin Using Fluorescence Spectroscopy , 2011, Journal of Fluorescence.

[6]  A. Plepis,et al.  Porcine skin as a source of biodegradable matrices: alkaline treatment and glutaraldehyde crosslinking , 2010 .

[7]  Xuan Mao,et al.  Immobilization of type-I collagen and basic fibroblast growth factor (bFGF) onto poly (HEMA-co-MMA) hydrogel surface and its cytotoxicity study , 2010, Journal of materials science. Materials in medicine.

[8]  I. Kang,et al.  In vitro assessment of antibacterial activity and cytocompatibility of silver-containing PHBV nanofibrous scaffolds for tissue engineering. , 2010, Biomacromolecules.

[9]  V. Langlois,et al.  Surface functionalization of PHBV by HEMA grafting via UV treatment: Comparison with thermal free radical polymerization , 2010 .

[10]  R. Landers,et al.  Synthesis and spectroscopic characterization of polymer and oligomers of ortho-phenylenediamine , 2010 .

[11]  Jack F Douglas,et al.  Interaction of gold nanoparticles with common human blood proteins. , 2010, ACS nano.

[12]  M. Wolcott,et al.  Reinforcing and Toughening Effects of Bamboo Pulp Fiber on Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Fiber Composites , 2010 .

[13]  Yingjun Wang,et al.  Surface Modification of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Membrane by Combining Surface Aminolysis Treatment with Collagen Immobilization , 2009 .

[14]  K. Neoh,et al.  Active protein-functionalized poly(poly(ethylene glycol) monomethacrylate)-Si(100) hybrids from surface-initiated atom transfer radical polymerization for potential biological applications. , 2009, Biomacromolecules.

[15]  Gang Wu,et al.  Surface engineering of PHBV by covalent collagen immobilization to improve cell compatibility. , 2009, Journal of biomedical materials research. Part A.

[16]  M. Welch,et al.  Bacterial and mammalian cell response to poly(3-sulfopropyl methacrylate) brushes loaded with silver halide salts. , 2009, Biomaterials.

[17]  N. Mohan,et al.  Polyvinyl alcohol-poly(caprolactone) semi IPN scaffold with implication for cartilage tissue engineering. , 2008, Journal of biomedical materials research. Part B, Applied biomaterials.

[18]  M. E. S. Silva,et al.  Bioartificial polymeric materials based on collagen and poly(N-isopropylacrylamide) , 2007 .

[19]  V. Langlois,et al.  Modification of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) film by chemical graft copolymerization. , 2007, Biomacromolecules.

[20]  Guoqiang Chen,et al.  The mechanical properties and in vitro biodegradation and biocompatibility of UV-treated poly(3-hydroxybutyrate-co-3-hydroxyhexanoate). , 2006, Biomaterials.

[21]  L. Rintoul,et al.  Introducing amine functionalities on a poly(3-hydroxybutyrate-co-3-hydroxyvalerate) surface: comparing the use of ammonia plasma treatment and ethylenediamine aminolysis. , 2006, Biomacromolecules.

[22]  D. Raghavan,et al.  Bone Cell Viability on Methacrylic Acid Grafted and Collagen Immobilized Porous Poly (3-hydroxybutrate-co-3-hydroxyvalerate , 2005 .

[23]  K. Gaus,et al.  Formation of tetra(ethylene oxide) terminated Si-C linked monolayers and their derivatization with glycine: an example of a generic strategy for the immobilization of biomolecules on silicon. , 2005, Langmuir : the ACS journal of surfaces and colloids.

[24]  Guoqiang Chen,et al.  The application of polyhydroxyalkanoates as tissue engineering materials. , 2005, Biomaterials.

[25]  Yi Hong,et al.  Collagen-coated polylactide microspheres as chondrocyte microcarriers. , 2005, Biomaterials.

[26]  J. Irudayaraj,et al.  Examination of Cholesterol oxidase attachment to magnetic nanoparticles , 2005, Journal of nanobiotechnology.

[27]  Abdelwahab Omri,et al.  Antimicrobial efficacy of a new antibiotic-loaded poly(hydroxybutyric-co-hydroxyvaleric acid) controlled release system. , 2004, The Journal of antimicrobial chemotherapy.

[28]  Chi-Hsiung Jou,et al.  Biocompatibility and antibacterial activity of chitosan and collagen immobilized poly(3-hydroxybutyric acid-co-3-hydroxyvaleric acid) , 2004 .

[29]  Michael Wagener,et al.  An in vitro assessment of the antibacterial properties and cytotoxicity of nanoparticulate silver bone cement. , 2004, Biomaterials.

[30]  I. Sondi,et al.  Silver nanoparticles as antimicrobial agent: a case study on E. coli as a model for Gram-negative bacteria. , 2004, Journal of colloid and interface science.

[31]  T G Volova,et al.  Tissue response to the implantation of biodegradable polyhydroxyalkanoate sutures , 2004, Journal of materials science. Materials in medicine.

[32]  T. He,et al.  Endothelium regeneration on luminal surface of polyurethane vascular scaffold modified with diamine and covalently grafted with gelatin. , 2004, Biomaterials.

[33]  Chi-Hsiung Jou,et al.  Protein adsorption, fibroblast activity and antibacterial properties of poly(3-hydroxybutyric acid-co-3-hydroxyvaleric acid) grafted with chitosan and chitooligosaccharide after immobilized with hyaluronic acid. , 2003, Biomaterials.

[34]  V. Hasırcı,et al.  Macroporous poly(3-hydroxybutyrate-co-3-hydroxyvalerate) matrices for bone tissue engineering. , 2003, Biomaterials.

[35]  F. Korkusuz,et al.  Poly(3-hydroxybutyric acid-co-3-hydroxyvaleric acid) based tissue engineering matrices , 2003, Journal of materials science. Materials in medicine.

[36]  Changyou Gao,et al.  Surface modification of polycaprolactone membrane via aminolysis and biomacromolecule immobilization for promoting cytocompatibility of human endothelial cells. , 2002, Biomacromolecules.

[37]  I. Bibers,et al.  Effect of 3-hydroxy valerate content on some physical and mechanical properties of polyhydroxyalkanoates produced by Azotobacter chroococcum , 2000 .

[38]  K. Anselme,et al.  Osteoblast adhesion on biomaterials. , 2000, Biomaterials.

[39]  A. Kang,et al.  A synthetic peptide derived from the sequence of a type I collagen receptor inhibits type I collagen-mediated platelet aggregation. , 1997, The Journal of clinical investigation.

[40]  J. Feijen,et al.  Glutaraldehyde as a crosslinking agent for collagen-based biomaterials , 1995 .

[41]  S. Perren,et al.  Tissue response and in vivo degradation of selected polyhydroxyacids: polylactides (PLA), poly(3-hydroxybutyrate) (PHB), and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHB/VA). , 1993, Journal of biomedical materials research.

[42]  W. Bonfield,et al.  In vitro and in vivo evaluation of polyhydroxybutyrate and of polyhydroxybutyrate reinforced with hydroxyapatite. , 1991, Biomaterials.

[43]  T. Krieg,et al.  Regulation of collagen synthesis in fibroblasts within a three-dimensional collagen gel. , 1988, Experimental cell research.

[44]  M. M. Bradford.  A rapid and sensitive method for the quantitation of microgram quantities of protein utilizing the principle of protein-dye binding. , 1976, Analytical biochemistry.

[45]  O. Wilson,et al.  Characterization of Silver/Bovine Serum Albumin (Ag/BSA) nanoparticles structure: morphological, compositional, and interaction studies. , 2013, Journal of colloid and interface science.

[46]  Meifang Zhu,et al.  Reducing the formation of six-membered ring ester during thermal degradation of biodegradable PHBV to enhance its thermal stability , 2009 .

[47]  M. Trau,et al.  Polymeric grafting of acrylic acid onto poly(3-hydroxybutyrate-co-3-hydroxyvalerate): surface functionalization for tissue engineering applications. , 2005, Biomacromolecules.

[48]  R. Marchessault,et al.  Thermal degradation of poly(3-hydroxyalkanoates): preparation of well-defined oligomers. , 2002, Biomacromolecules.

[49]  M. Trau,et al.  Nanostructured biomaterials: a novel approach to artificial bone implants , 2001 .

[50]  D J Mooney,et al.  Alginate hydrogels as synthetic extracellular matrix materials. , 1999, Biomaterials.