Broadband dielectric/electric properties of epoxy thin films filled with multiwalled carbon nanotubes

Abstract. Many attempts have been made to fully explore flexibility, resistance to corrosion, and processing advantage of epoxy resin filled with carbon nanotubes (CNTs) as conductive filler, although sometimes with a certain degradation of polymers’ intrinsic properties. It is important to move the percolation threshold into the region of smaller CNTs’ concentration. The results of a broadband dielectric investigation of multiwalled CNT (MWCNT)/epoxy resin composites in wide temperature range from room temperature to 450 K were analyzed for percolation. Far below the percolation threshold (0.25 wt. % MWCNT) the dielectric properties of the composite are mostly determined by alpha relaxation in pure polymer matrix and the freezing temperature decreases due to the extra free volume at the polymer–filler interface. Close to the percolation threshold, the composite shows the negative temperature coefficient effect in the temperature region, where the pure polymer matrix becomes conductive. The activation energy of DC conductivity increases with the MWCNT concentration far below the percolation threshold and decreases close to it (1.5 wt. % MWCNT). The dielectric analysis of the MWCNT/epoxy resin reveals a significant influence of the polymer matrix on the temperature dependence of composite dielectric properties.

[1]  M. S. Sarto,et al.  EMC Impact of Advanced Carbon Fiber/Carbon Nanotube Reinforced Composites for Next-Generation Aerospace Applications , 2008, IEEE Transactions on Electromagnetic Compatibility.

[2]  S. Bellucci,et al.  Mechanical and electrical characterization of epoxy nanocomposites for electromagnetic shielding devices in aerospace applications , 2009, 2009 IEEE International Symposium on Electromagnetic Compatibility.

[3]  P. Ma,et al.  Correlations between Percolation Threshold, Dispersion State, and Aspect Ratio of Carbon Nanotubes , 2007 .

[4]  Darryl P Almond,et al.  The determination of hopping rates and carrier concentrations in ionic conductors by a new analysis of ac conductivity , 1983 .

[5]  Mahn‐Soo Choi,et al.  Complexity in charge transport for multiwalled carbon nanotube and poly(methyl methacrylate) composites , 2006 .

[6]  C. Pitt,et al.  Electrical Properties of Epoxy Resins , 1957 .

[7]  Gintaras Valušis,et al.  Microwave probing of nanocarbon based epoxy resin composite films: Toward electromagnetic shielding , 2011 .

[8]  W. Bauhofer,et al.  A review and analysis of electrical percolation in carbon nanotube polymer composites , 2009 .

[9]  C. W. Trueman,et al.  Carbon Nanotube Composites for Wideband Millimeter-Wave Antenna Applications , 2011, IEEE Transactions on Antennas and Propagation.

[10]  P. Lamberti,et al.  Effect of functionalization on the thermo-mechanical and electrical behavior of multi-wall carbon nanotube/epoxy composites , 2011 .

[11]  S. Bellucci,et al.  The electrical properties of epoxy resin composites filled with Cnts and carbon black. , 2011, Journal of nanoscience and nanotechnology.

[12]  Hsu-Chiang Kuan,et al.  Preparation and thermal, electrical, and morphological properties of multiwalled carbon nanotubeand epoxy composites , 2007 .

[13]  Simon S. Park,et al.  Electrical and electromagnetic interference shielding properties of flow-induced oriented carbon nanotubes in polycarbonate , 2011 .

[14]  J. M. Kikkawa,et al.  Very Low Conductivity Threshold in Bulk Isotropic Single‐Walled Carbon Nanotube–Epoxy Composites , 2005 .

[15]  I. Szleifer,et al.  Polymers and carbon nanotubes : dimensionality, interactions and nanotechnology , 2005 .

[16]  Gintaras Valušis,et al.  Electromagnetic shielding properties of MWCNT/PMMA composites in Ka‐band , 2009 .

[17]  Christian A. Martin,et al.  Formation of percolating networks in multi-wall carbon-nanotube–epoxy composites , 2004 .

[18]  N. Hu,et al.  The electrical properties of polymer nanocomposites with carbon nanotube fillers , 2008, Nanotechnology.

[19]  Hugh Alan Bruck,et al.  Conductivity enhancement of carbon nanotube and nanofiber-based polymer nanocomposites by melt annealing , 2008 .

[20]  Milo S. P. Shaffer,et al.  Development of a dispersion process for carbon nanotubes in an epoxy matrix and the resulting electrical properties , 1999 .

[21]  J. Petzelt,et al.  Broad-band conductivity and dielectric spectroscopy of composites of multiwalled carbon nanotubes and poly(ethylene terephthalate) around their low percolation threshold , 2013, Nanotechnology.

[22]  N. A. Siddiqui,et al.  DISPERSION AND FUNCTIONALIZATION OF CARBON NANOTUBES FOR POLYMER-BASED NANOCOMPOSITES: A REVIEW , 2010 .

[23]  F. Wei,et al.  Electromagnetic and microwave absorbing properties of multi-walled carbon nanotubes/polymer composites , 2006 .

[24]  P. Lamberti,et al.  Cure behavior and physical properties of epoxy resin-filled with multiwalled carbon nanotubes. , 2010, Journal of nanoscience and nanotechnology.

[25]  S. Bellucci,et al.  Electrical Properties and Electromagnetic Shielding Effectiveness of Carbon Based Epoxy Nanocomposites , 2012 .

[26]  P. Pissis,et al.  Electrical/dielectric properties and conduction mechanism in melt processed polyamide/multi-walled carbon nanotubes composites , 2009 .

[27]  Hui‐Ming Cheng,et al.  Positive temperature coefficient effect in multiwalled carbon nanotube/high-density polyethylene composites , 2005 .

[28]  J. Volakis,et al.  Polymer-Carbon Nanotube Sheets for Conformal Load Bearing Antennas , 2010, IEEE Transactions on Antennas and Propagation.

[29]  Jie-feng Gao,et al.  Large-scale fabrication and electrical properties of an anisotropic conductive polymer composite utilizing preferable location of carbon nanotubes in a polymer blend , 2010 .

[30]  C. Brosseau,et al.  Variable-temperature measurements of the dielectric relaxation in carbon black loaded epoxy composites , 2009 .

[31]  Xiao Lin,et al.  Electromagnetic interference (EMI) shielding of single-walled carbon nanotube epoxy composites. , 2006, Nano letters.

[32]  Shenglin Jiang,et al.  Significant influence of film thickness on the percolation threshold of multiwall carbon nanotube/low density polyethylene composite films , 2009 .

[33]  Gintaras Valušis,et al.  Electromagnetic shielding efficiency in Ka-band: carbon foam versus epoxy/carbon nanotube composites , 2012 .

[34]  J. Volakis,et al.  Embroidered Conductive Fibers on Polymer Composite for Conformal Antennas , 2012, IEEE Transactions on Antennas and Propagation.

[35]  Uttandaraman Sundararaj,et al.  Electromagnetic interference shielding mechanisms of CNT/polymer composites , 2009 .

[36]  Meysam Rahmat,et al.  Carbon nanotube–polymer interactions in nanocomposites: A review , 2011 .

[37]  Kenneth L. Dudley,et al.  Towards cost-efficient EMI shielding materials using carbon nanostructure-based nanocomposites , 2007 .

[38]  D. Chung.  Carbon materials for structural self-sensing, electromagnetic shielding and thermal interfacing , 2012 .

[39]  Jang‐Kyo Kim,et al.  Effect of CNT decoration with silver nanoparticles on electrical conductivity of CNT-polymer composites , 2008 .

[40]  C. Balasubramanian,et al.  CNT composites for aerospace applications , 2006, 2007 Cleantech Conference and Trade Show Cleantech 2007.

[41]  Peng Zhang,et al.  Thermal expansion behaviors of aluminum composite reinforced with carbon nanotubes , 2008 .

[42]  T. Chou,et al.  Advances in the science and technology of carbon nanotubes and their composites: a review , 2001 .

[43]  E. Ivanov,et al.  Effects of processing conditions on rheological, thermal, and electrical properties of multiwall carbon nanotube/epoxy resin composites , 2011 .

[44]  Yiu-Wing Mai,et al.  Dispersion and alignment of carbon nanotubes in polymer matrix: A review , 2005 .

[45]  P. Lamberti,et al.  Comparison of the physical properties of epoxy‐based composites filled with different types of carbon nanotubes for aeronautic applications , 2012 .

[46]  Hongjun Gao,et al.  The influence of single-walled carbon nanotube structure on the electromagnetic interference shielding efficiency of its epoxy composites , 2007 .

[47]  Faxiang Qin,et al.  A review and analysis of microwave absorption in polymer composites filled with carbonaceous particles , 2012 .

[48]  D. Seliuta,et al.  Epoxy Resin/SWCNT Shielding Paint for Super-High-Frequency Range , 2012 .

[49]  C. Balasubramanian,et al.  Screening Electromagnetic Interference Effect using Nanocomposites , 2008 .

[50]  Hao Tang,et al.  Studies on the PTC/NTC effect of carbon black filled low density polyethylene composites , 1997 .

[51]  Changxin Chen,et al.  Enhanced Dielectric Constant for Efficient Electromagnetic Shielding Based on Carbon-Nanotube-Added Styrene Acrylic Emulsion Based Composite , 2010, Nanoscale research letters.

[52]  Richard A. Vaia,et al.  Deformation–morphology correlations in electrically conductive carbon nanotube—thermoplastic polyurethane nanocomposites , 2005 .

[53]  Y Bayram,et al.  E-Textile Conductors and Polymer Composites for Conformal Lightweight Antennas , 2010, IEEE Transactions on Antennas and Propagation.