Dynamic precipitation and its effect on microstructure of 2195 Al-Li alloy during medium/high temperature deformation

[1]  Yu Liu,et al.  Influence of homogenization treatment on microstructure and recrystallization behavior of 2195 Al–Li alloy , 2023, Transactions of Nonferrous Metals Society of China.

[2]  J. P. Oliveira,et al.  A novel heterogeneous multi-wire indirect arc directed energy deposition for in-situ synthesis Al-Zn-Mg-Cu alloy: process, microstructure and mechanical properties , 2023, Additive Manufacturing.

[3]  Qudong Wang,et al.  Hot Deformation Behavior and Processing Maps of an As-Cast Al-5Mg-3Zn-1Cu (wt%) Alloy , 2023, Materials.

[4]  Yuan-chun Huang,et al.  Microstructural Evolution and Dynamic Recrystallization Behavior of the Homogenized 2195 Al–Li Alloy During Hot Deformation , 2023, Metals and Materials International.

[5]  H. Hou,et al.  Deformation-induced dynamic precipitation of 14H-LPSO structure and its effect on dynamic recrystallization in hot-extruded Mg-Y-Zn alloys , 2023, International Journal of Plasticity.

[6]  Xiaohua Chen,et al.  Effects of re-solution, pre-stretching and double re-ageing treatment on mechanical behavior and microstructure of 2195 Al–Cu–Li alloy , 2022, Materials Science and Engineering: A.

[7]  Guoqun Zhao,et al.  Precipitation behavior and its effect on the dynamic recrystallization of a novel extruded Al-Cu-Li alloy , 2022, Materials & Design.

[8]  B. Guo,et al.  Hot deformation behavior and microstructure evolution of the spray deposited and secondary hot extruded 2195 Al-Li alloy , 2022, Journal of Materials Research and Technology.

[9]  Xinyue Zhao,et al.  Dynamic microstructural evolution of Al-Cu-Li alloys during hot deformation , 2022, Materials Characterization.

[10]  J. Robson,et al.  Modelling dynamic precipitation in pre-aged Aluminium alloys under warm forming conditions , 2022, Acta Materialia.

[11]  M. Gao,et al.  Deformation behavior and dynamic recrystallization during hot compression in homogenized Al–6Mg–0.8Mn alloys , 2022, Materials Science & Engineering: A.

[12]  Weijiu Huang,et al.  Effects of T1/T2 precipitates on deformation behavior and microstructure evolution of AA2099 Al-Li alloy: Experimental investigation and crystal plasticity finite element modeling , 2022, Journal of Materials Research and Technology.

[13]  Ji-wu Huang,et al.  Dynamic recrystallization and precipitation behavior of a novel Sc, Zr alloyed Al-Zn-Mg-Cu alloy during hot deformation , 2021, Materials Characterization.

[14]  Liu Wensheng,et al.  Deformation behavior and microstructure evolution of Al–5.06Mg–1.67Li–0.51Zn alloy under hot compression , 2021 .

[15]  K. Matsuda,et al.  Effects of texture and precipitates characteristics on anisotropic hardness evolution during artificial aging for an Al–Cu–Li alloy , 2021, Materials & Design.

[16]  Qudong Wang,et al.  Hot deformation constitutive model and processing maps of homogenized Al–5Mg–3Zn–1Cu alloy , 2021 .

[17]  Guoqun Zhao,et al.  Microstructure evolution of spray deposited and as-cast 2195 Al-Li alloys during homogenization , 2021 .

[18]  Jiangyong Bao,et al.  Dynamic precipitation and recrystallization mechanism during hot compression of Mg-Gd-Y-Zr alloy , 2021 .

[19]  Haiping Yu,et al.  Superior mechanical properties and microstructual evolution of 2195-T6 Al-Li alloys at a high strain rate , 2021, Materials Science and Engineering: A.

[20]  Pengfei Yu,et al.  Analysis and characterization of dynamic recrystallization and grain structure evolution in friction stir welding of aluminum plates , 2021, Acta Materialia.

[21]  B. Liao,et al.  Hot deformation and dynamic recrystallization in Al-Mg-Si alloy , 2021, Materials Characterization.

[22]  You-ping Yi,et al.  Dynamic recrystallization mechanisms of 2195 aluminum alloy during medium/high temperature compression deformation , 2021, Materials Science and Engineering: A.

[23]  Yuman Zhu,et al.  Dynamic precipitation behavior and mechanical properties of hot-extruded Mg89Y4Zn2Li5 alloys with different extrusion ratio and speed , 2020 .

[24]  Guoqun Zhao,et al.  Constitutive modeling and microstructure characterization of 2196 Al-Li alloy in various hot deformation conditions , 2020 .

[25]  I. Karaman,et al.  Effects of dynamic recrystallization and strain-induced dynamic precipitation on the corrosion behavior of partially recrystallized Mg–9Al–1Zn alloys , 2020 .

[26]  Guoqun Zhao,et al.  Microstructure evolution and precipitation characteristics of spray-formed and subsequently extruded 2195 Al-Li alloy plate during solution and aging process , 2020, Journal of Materials Processing Technology.

[27]  Myoung-Gyu Lee,et al.  Modelling continuous dynamic recrystallization of aluminum alloys based on the polycrystal plasticity approach , 2020 .

[28]  R. Logé,et al.  A critical assessment of experimental investigation of dynamic recrystallization of metallic materials , 2020, Materials & Design.

[29]  Guoqun Zhao,et al.  Effects of heat treatment on the microstructure and mechanical properties of extruded 2196 Al-Cu-Li alloy , 2020, Materials & Design.

[30]  Z. Jia,et al.  Microstructure and mechanical properties of 2195 alloys prepared by traditional casting and spray forming , 2020, Materials Science and Engineering: A.

[31]  M. Fu,et al.  Study on the dynamic recrystallization mechanisms of Inconel 740 superalloy during hot deformation , 2020 .

[32]  Shu-nong Jiang,et al.  Increasing strength and ductility of a Mg–9Al alloy by dynamic precipitation assisted grain refinement during multi-directional forging , 2020 .

[33]  A. Luo,et al.  Microstructure and hot deformation behavior of a new aluminum–lithium–copper based AA2070 alloy , 2020 .

[34]  H. Höppel,et al.  Hetero-deformation induced (HDI) hardening does not increase linearly with strain gradient , 2020, Scripta Materialia.

[35]  Q. Pan,et al.  Microstructure evolution and physical-based diffusion constitutive analysis of Al-Mg-Si alloy during hot deformation , 2019 .

[36]  A. Odeshi,et al.  Crash-worthiness of a recently-developed AA 2624 aluminum alloy: Experimental studies , 2019, Materials Science and Engineering: A.

[37]  S. M. Fatemi,et al.  Dynamic precipitation and dynamic recrystallization during hot deformation of a solutionized WE43 magnesium alloy , 2019, Materials Science and Engineering: A.

[38]  H. Azzeddine,et al.  Microstructure and texture evolution of AZ31 Mg alloy after uniaxial compression and annealing , 2019, Journal of Magnesium and Alloys.

[39]  T. P. Weihs,et al.  Dynamic Precipitation and Recrystallization in Mg-9wt.%Al During Equal-Channel Angular Extrusion: A Comparative Study to Conventional Aging , 2018, Acta Materialia.

[40]  Xingwei Zheng,et al.  Plastic flow behavior and microstructure characteristics of light-weight 2060 Al-Li alloy , 2018, Materials Science and Engineering: A.

[41]  Liyun Ma,et al.  A Review on Superplastic Formation Behavior of Al Alloys , 2018, Advances in Materials Science and Engineering.

[42]  Hyoung-Wook Kim,et al.  Hot deformation behavior and microstructure evolution of annealed Al-7.9Zn-2.7Mg-2.0Cu (wt%) alloy , 2018, Journal of Alloys and Compounds.

[43]  Jin-feng Li,et al.  Flow curve correction and processing map of 2050 Al–Li alloy , 2018 .

[44]  R. Logé,et al.  The double-edge effect of second-phase particles on the recrystallization behaviour and associated mechanical properties of metallic materials , 2018 .

[45]  Yong-bo Xu,et al.  Strengthening mechanisms, deformation behavior, and anisotropic mechanical properties of Al-Li alloys: A review , 2017, Journal of advanced research.

[46]  S. Kumar,et al.  Work hardening characteristics and microstructural evolution during hot deformation of a nickel superalloy at moderate strain rates , 2017 .

[47]  Ke Huang,et al.  A review of dynamic recrystallization phenomena in metallic materials , 2016 .

[48]  L. Zhuang,et al.  Physically based constitutive analysis and microstructural evolution of AA7050 aluminum alloy during hot compression , 2016 .

[49]  G. Appa Rao,et al.  Strain rate dependent microstructural evolution during hot deformation of a hot isostatically processed nickel base superalloy , 2016 .

[50]  Zhu-bin He,et al.  Microstructure, texture and hardness of Al–Cu–Li alloy sheet during hot gas forming with integrated heat treatment , 2016 .

[51]  Y. Lin,et al.  EBSD study of a hot deformed nickel-based superalloy , 2015 .

[52]  J. Robson,et al.  Heterogeneous Zr solute segregation and Al3Zr dispersoid distributions in Al–Cu–Li alloys , 2015 .

[53]  Xinyun Wang,et al.  A new dynamic recrystallisation model of an extruded Al-Cu-Li alloy during high-temperature deformation , 2015 .

[54]  T. Dorin,et al.  Quantification and modelling of the microstructure/strength relationship by tailoring the morphological parameters of the T1 phase in an Al–Cu–Li alloy , 2014 .

[55]  Christopher Hutchinson,et al.  Quantitative measurements of dynamic precipitation during fatigue of an Al–Zn–Mg–(Cu) alloy using small-angle X-ray scattering , 2014 .

[56]  T. Dorin,et al.  Strengthening mechanisms of T1 precipitates and their influence on the plasticity of an Al-Cu-Li alloy , 2014 .

[57]  Zhixing Wang,et al.  Orientation dependence of the dislocation microstructure in compressed body-centered cubic molybdenum , 2014 .

[58]  J. Jonas,et al.  Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions , 2014 .

[59]  T. Dorin,et al.  The influence of precipitation on plastic deformation of Al-Cu-Li alloys , 2013 .

[60]  E. Nes,et al.  Effect of Concurrent Precipitation on Recrystallization and Evolution of the P-Texture Component in a Commercial Al-Mn Alloy , 2010 .

[61]  S. Ringer,et al.  Influence of equal-channel angular pressing on precipitation in an Al–Zn–Mg–Cu alloy , 2009 .

[62]  B. Muddle,et al.  Strengthening of an Al–Cu–Sn alloy by deformation-resistant precipitate plates , 2008 .

[63]  P. Bate,et al.  Mechanical behaviour and microstructural evolution in superplastic Al-Li-Mg-Cu-Zr AA8090 , 2007 .

[64]  D. Seidman,et al.  Precipitation strengthening at ambient and elevated temperatures of heat-treatable Al(Sc) alloys [Acta Materialia 50(16), pp. 4021–4035] , 2003 .

[65]  T. Mcnelley,et al.  Texture analysis of the transition from slip to grain boundary sliding in a continuously recrystallized superplastic aluminum alloy , 2001 .

[66]  H. Kimura,et al.  Excess Vacancies and the Nucleation of Precipitates in Aluminum-Silicon Alloys , 1970 .

[67]  G. Love,et al.  Dislocation pipe diffusion , 1964 .

[68]  Qudong Wang,et al.  A comprehensive review of magnesium-based alloys and composites processed by cyclic extrusion compression and the related techniques , 2022, Progress in Materials Science.