A mm-sized wirelessly powered and remotely controlled locomotive implantable device

Fully autonomous implantable systems with locomotion can revolutionize medical technology, and include applications ranging from diagnostics to minimally invasive surgery. However, the extreme power requirements of fluid locomotion impose significant design challenges. Using highly efficient and scalable electromagnetic propulsion systems, these locomotive devices become possible. Recent work shows that mm-sized antennas in tissue achieve optimal power transfer efficiency in the low-GHz range. Combining this power transfer method with the highly efficient propulsion, a fully wireless locomotive implant capable of moving at 0.53cm/s has been realized in 65nm CMOS with a 2mm × 2mm receive antenna and a 0.6×1mm2 die size with a 2W 1.86GHz carrier. The design consists of an RF frontend, bandgap reference, regulator, demodulator, digital control, and configurable high-current drivers for the propulsion system.

[1]  Fei Yuan,et al.  A High-Gain Power-Matching Technique for Efficient Radio-Frequency Power Harvest of Passive Wireless Microsystems , 2010, IEEE Transactions on Circuits and Systems I: Regular Papers.

[2]  Ada S. Y. Poon,et al.  Locomotive micro-implant with active electromagnetic propulsion , 2009, 2009 Annual International Conference of the IEEE Engineering in Medicine and Biology Society.

[3]  Ahmed Ben Hamida,et al.  A full digital low power dpsk demodulator and clock recovery circuit for high data rate neural implants , 2010, 2010 17th IEEE International Conference on Electronics, Circuits and Systems.

[4]  Teresa H. Y. Meng,et al.  A mm-sized implantable power receiver with adaptive link compensation , 2009, 2009 IEEE International Solid-State Circuits Conference - Digest of Technical Papers.

[5]  A.P. Chandrakasan,et al.  Minimum Energy Tracking Loop With Embedded DC–DC Converter Enabling Ultra-Low-Voltage Operation Down to 250 mV in 65 nm CMOS , 2008, IEEE Journal of Solid-State Circuits.

[6]  Y. Amemiya,et al.  A 300 nW, 15 ppm/$^{\circ}$C, 20 ppm/V CMOS Voltage Reference Circuit Consisting of Subthreshold MOSFETs , 2009, IEEE Journal of Solid-State Circuits.