Plastic flexible films waste management - A state of art review.

Plastic flexible films are increasingly used in many applications due to their lightness and versatility. In 2014, the amount of plastic films represented 34% of total plastic packaging produced in UK. The flexible film waste generation rises according to the increase in number of applications. Currently, in developed countries, about 50% of plastics in domestic waste are films. Moreover, about 615,000 tonnes of agricultural flexible waste are generated in the EU every year. A review of plastic films recycling has been conducted in order to detect the shortcomings and establish guidelines for future research. This paper reviews plastic films waste management technologies from two different sources: post-industrial and post-consumer. Clean and homogeneous post-industrial waste is recycled through closed-loop or open-loop mechanical processes. The main differences between these methods are the quality and the application of the recycled materials. Further research should be focused on closing the loops to obtain the highest environmental benefits of recycling. This could be accomplished through minimizing the material degradation during mechanical processes. Regarding post-consumer waste, flexible films from agricultural and packaging sectors have been assessed. The agricultural films and commercial and industrial flexible packaging are recycled through open-loop mechanical recycling due to existing selective waste collection routes. Nevertheless, the contamination from the use phase adversely affects the quality of recycled plastics. Therefore, upgrading of current washing lines is required. On the other hand, household flexible packaging shows the lowest recycling rates mainly because of inefficient sorting technologies. Delamination and compatibilization methods should be further developed to ensure the recycling of multilayer films. Finally, Life Cycle Assessment (LCA) studies on waste management have been reviewed. A lack of thorough LCA on plastic films waste management systems was identified.

[1]  B. Grady,et al.  Use of surfactants to remove water based inks from plastic films , 2001 .

[2]  Joan Rieradevall,et al.  Contribution of plastic waste recovery to greenhouse gas (GHG) savings in Spain. , 2015, Waste management.

[3]  M. Aznar,et al.  Plastic waste elimination by co-gasification with coal and biomass in fluidized bed with air in pilot plant , 2006 .

[4]  Monia Niero,et al.  Review of LCA studies of solid waste management systems--part I: lessons learned and perspectives. , 2014, Waste management.

[5]  P. Rocculi,et al.  Life Cycle Assessment of multilayer polymer film used on food packaging field , 2011 .

[6]  P. Simões,et al.  Life cycle assessment of a packaging waste recycling system in Portugal. , 2014, Waste management.

[7]  P. Cinelli,et al.  Recyclability of PET/WPI/PE Multilayer Films by Removal of Whey Protein Isolate-Based Coatings with Enzymatic Detergents , 2016, Materials.

[8]  A. Lappas,et al.  Chemical recycling of plastic wastes made from polyethylene (LDPE and HDPE) and polypropylene (PP). , 2007, Journal of hazardous materials.

[9]  Qingbin Song,et al.  Environmental performance of municipal solid waste strategies based on LCA method: a case study of Macau , 2013 .

[10]  G. Papageorgiou,et al.  Recycling of polymers from plastic packaging materials using the dissolution–reprecipitation technique , 2009 .

[11]  David Lazarevic,et al.  Plastic waste management in the context of a European recycling society: Comparing results and uncertainties in a life cycle perspective , 2010 .

[12]  B. Grady,et al.  Use of surfactants to remove water-based inks from plastic film: effect of calcium ion concentration and length of surfactant hydrophobe , 2004 .

[13]  J. Wagner Blown film, cast film and lamination processes , 2016 .

[14]  G. Martínez-Barrera,et al.  Solvent effect in the polyethylene recovery from multilayer postconsumer aseptic packaging. , 2015, Waste management.

[15]  Carmela Sica,et al.  PLASTIC MATERIALS IN EUROPEAN AGRICULTURE: ACTUAL USE AND PERSPECTIVES , 2012 .

[16]  D Briassoulis,et al.  Technical specifications for mechanical recycling of agricultural plastic waste. , 2013, Waste management.

[17]  Kotiba Hamad,et al.  Recycling of waste from polymer materials: An overview of the recent works , 2013 .

[18]  E. Abdel‐Bary,et al.  Recycling of polyethylene films used in greenhouses—Development of multilayer plastic films , 1998 .

[19]  Fu Gu,et al.  From waste plastics to industrial raw materials: A life cycle assessment of mechanical plastic recycling practice based on a real-world case study. , 2017, The Science of the total environment.

[20]  Davide Tonini,et al.  Mechanical-biological treatment: performance and potentials. An LCA of 8 MBT plants including waste characterization. , 2013, Journal of environmental management.

[21]  Mario Grosso,et al.  Environmental evaluation of plastic waste management scenarios , 2014 .

[22]  D. C. Morgan,et al.  Polymer film packaging for food: An environmental assessment , 2013 .

[23]  Henrik Wenzel,et al.  Central sorting and recovery of MSW recyclable materials: A review of technological state-of-the-art, cases, practice and implications for materials recycling. , 2015, Journal of environmental management.

[24]  Daniel Hellström,et al.  Packaging and logistics interactions in retail supply chains , 2007 .

[25]  Robert E. Dvorak,et al.  Plastics recycling: challenges and opportunities , 2009, Philosophical Transactions of the Royal Society B: Biological Sciences.

[26]  D. Hui,et al.  Recycling of plastic solid waste: A state of art review and future applications , 2017 .

[27]  J. Morawiec,et al.  Recycling of postconsumer poly(ethylene terephthalate) and high‐density polyethylene by compatibilized blending , 2002 .

[28]  Z. Tartakowski Recycling of packaging multilayer films: New materials for technical products , 2010 .

[29]  F. Mantia Closed-loop recycling. A case study of films for greenhouses , 2010 .

[30]  J. Drobny Recycling of Thermoplastic Elastomers , 2007 .

[31]  Paola Lettieri,et al.  The valorization of plastic solid waste (PSW) by primary to quaternary routes: From re-use to energy and chemicals , 2010 .

[32]  S. Ferreira,et al.  Life cycle assessment and valuation of the packaging waste recycling system in Belgium , 2017 .

[33]  M D Bovea,et al.  Environmental assessment of alternative municipal solid waste management strategies. A Spanish case study. , 2010, Waste management.

[34]  M Hiskakis,et al.  Experimental investigation of the quality characteristics of agricultural plastic wastes regarding their recycling and energy recovery potential. , 2012, Waste management.

[35]  J. Baeyens,et al.  Recycling and recovery routes of plastic solid waste (PSW): a review. , 2009, Waste management.

[36]  M. Sadat‐Shojai,et al.  Recycling of PVC wastes , 2011 .

[37]  A. Suna Erses Yay,et al.  Application of life cycle assessment (LCA) for municipal solid waste management: a case study of Sakarya , 2015 .

[38]  J. Scamehorn,et al.  Use of surfactants to remove solvent-based inks from plastic films , 2003 .

[39]  Rahul Singh,et al.  Thermolysis of waste plastics to liquid fuel: A suitable method for plastic waste management and manufacture of value added products—A world prospective , 2010 .

[40]  U. Bos,et al.  LIFE CYCLE ASSESSMENT OF COMMON USED AGRICULTURAL PLASTIC PRODUCTS IN THE EU , 2008 .

[41]  B. Grady,et al.  Deinking of water-based ink printing from plastic film using nonionic surfactants , 2002 .

[42]  Y. Fernández-Nava,et al.  Life cycle assessment of different municipal solid waste management options: a case study of Asturias (Spain) , 2014 .

[43]  Göran Finnveden,et al.  Plastic waste as a fuel - CO2-neutral or not? , 2009 .

[44]  Sebastião S. C. Junior,et al.  Recycling assessment of multilayer flexible packaging films using design of experiments , 2015 .

[45]  J. Månson,et al.  Effect of inclusions and blending on the mechanical performance of recycled multilayer PP/PET/SiOx Films , 2000 .

[46]  Gerard P.J. Dijkema,et al.  A new paradigm for waste management , 2000 .

[47]  E. Muniz,et al.  PET and aluminum recycling from multilayer food packaging using supercritical ethanol , 2013 .

[48]  Demetres Briassoulis,et al.  Review, mapping and analysis of the agricultural plastic waste generation and consolidation in Europe , 2013, Waste management & research : the journal of the International Solid Wastes and Public Cleansing Association, ISWA.

[49]  Jun-sheng Yu,et al.  Green and size-controllable synthesis of photoluminescent carbon nanoparticles from waste plastic bags , 2014 .