Review on photonic crystal coatings for scintillators

The amount of light and its time distribution are key factors determining the performance of scintillators when used as radiation detectors. However most inorganic scintillators are made of heavy materials and suffer from a high index of refraction which limits light extraction efficiency. This increases the path length of the photons in the material with the consequence of higher absorption and tails in the time distribution of the extracted light. Photonic crystals are a relatively new way of conquering this light extraction problem. Basically they are a way to produce a smooth and controllable index matching between the scintillator and the output medium through the nanostructuration of a thin layer of optically transparent high index material deposited at the coupling face of the scintillator. Our review paper discusses the theory behind this approach as well as the simulation details. Furthermore the different lithography steps of the production of an actual photonic crystal sample will be explained. Measurement results of LSO scintillator pixels covered with a nanolithography machined photonic crystal surface are presented together with practical tips for the further development and improvement of this technique.

[1]  E. Yablonovitch,et al.  Inhibited spontaneous emission in solid-state physics and electronics. , 1987, Physical review letters.

[2]  A. Knapitsch.  Photonic Crystals: Enhancing the Light Output of Scintillation Based Detectors , 2013 .

[3]  Steven G. Johnson,et al.  Block-iterative frequency-domain methods for Maxwell's equations in a planewave basis. , 2001, Optics express.

[4]  Jean-Pierre Berenger,et al.  A perfectly matched layer for the absorption of electromagnetic waves , 1994 .

[5]  Bo Liu,et al.  Giant light extraction enhancement of medical imaging scintillation materials using biologically inspired integrated nanostructures. , 2012, Optics letters.

[6]  P. Beckmann,et al.  The scattering of electromagnetic waves from rough surfaces , 1963 .

[7]  X. Letartre,et al.  Photonic crystals: A novel approach to enhance the light output of scintillation based detectors , 2011 .

[8]  M. Gu,et al.  Broadband light output enhancement for scintillator using whispering‐gallery modes in nanospheres , 2014 .

[9]  X. Letartre,et al.  Results of Photonic Crystal Enhanced Light Extraction on Heavy Inorganic Scintillators , 2012, IEEE Transactions on Nuclear Science.

[10]  E. Yablonovitch,et al.  Photonic band structure: The face-centered-cubic case. , 1989, Physical review letters.

[11]  Joel R. Wendt,et al.  InGaN/GaN quantum-well heterostructure light-emitting diodes employing photonic crystal structures , 2004 .

[12]  Amnon Yariv,et al.  Modified spontaneous emission from a two- dimensional photonic bandgap crystal slab , 2000 .

[13]  P. Lecoq,et al.  Probing the Concepts of Photonic Crystals on Scintillating Materials , 2008, IEEE Transactions on Nuclear Science.

[14]  John,et al.  Strong localization of photons in certain disordered dielectric superlattices. , 1987, Physical review letters.

[15]  L. Biró,et al.  Living photonic crystals: Butterfly scales — Nanostructure and optical properties , 2007 .

[16]  J. Joannopoulos,et al.  Enhanced coupling to vertical radiation using a two-dimensional photonic crystal in a semiconductor light-emitting diode , 2001 .

[17]  J. E. Harvey,et al.  Modified Beckmann-Kirchhoff scattering model for rough surfaces with large incident and scattering angles , 2007 .

[18]  Steven G. Johnson,et al.  Photonic Crystals: Molding the Flow of Light , 1995 .

[19]  R. Hagen.  Spectral Investigation of a 2-Dimensional Photonic CrystalSlab for mid-Infrared Radiation , 2007 .

[20]  C. Weisbuch,et al.  Optimization of Light-Diffracting Photonic-Crystals for High Extraction Efficiency LEDs , 2007, Journal of Display Technology.

[21]  Henri Benisty,et al.  Photonic bands in two-dimensionally patterned multimode GaN waveguides for light extraction , 2005 .

[22]  F. Rademakers,et al.  ROOT — An object oriented data analysis framework , 1997 .

[23]  Steven G. Johnson,et al.  Guided modes in photonic crystal slabs , 1999 .

[24]  M. Gu,et al.  Enhanced light extraction efficiency for glass scintillator coupled with two-dimensional photonic crystal structure , 2013 .

[25]  J. Cates,et al.  Increased Light Extraction From Inorganic Scintillators With Laser-Etched Microstructures , 2013, IEEE Transactions on Nuclear Science.

[26]  Peter Bienstman.  Rigorous and efficient modelling of wavelenght scale photonic components / Peter Bienstman. , 2001 .

[27]  Jonathan J. Wierer,et al.  III -nitride photonic-crystal light-emitting diodes with high extraction efficiency , 2009 .

[28]  Edwin L. Thomas,et al.  Periodic materials and interference lithography : for photonics, phononics and mechanics , 2009 .

[29]  F. X. Gentit,et al.  Litrani: a general purpose Monte-Carlo program simulating light propagation in isotropic or anisotropic media , 2002 .

[30]  T. Gaylord,et al.  Rigorous coupled-wave analysis of planar-grating diffraction , 1981 .

[31]  Cazimir G. Bostan,et al.  Design and fabrication of quasi-2D photonic crystal components based on silicon-on-insulator technology , 2005 .

[32]  Sui Xiubao,et al.  Study of photons reflection on rough surface , 2009 .

[33]  Harry J. Levinson,et al.  Principles of Lithography , 2001 .

[34]  P. Lecoq,et al.  Factors influencing time resolution of scintillators and ways to improve them , 2009, 2009 IEEE Nuclear Science Symposium Conference Record (NSS/MIC).