Cavitating Propeller Performance in Inclined Shaft Conditions with OpenFOAM: PPTC 2015 Test Case

[1]  Diego Villa,et al.  Steady cavitating propeller performance by using OpenFOAM, StarCCM+and a boundary element method , 2017 .

[2]  Stefano Gaggero,et al.  Design and analysis of a new generation of CLT propellers , 2016 .

[3]  Mehmet Atlar,et al.  Propeller cavitation noise investigations of a research vessel using medium size cavitation tunnel tests and full-scale trials , 2016 .

[4]  Mehmet Atlar,et al.  Systematic Cavitation Tunnel Tests of a Propeller in Uniform and Inclined Flow Conditions as Part of a Round Robin Test Campaign , 2016 .

[5]  Stefano Gaggero,et al.  Design of contracted and tip loaded propellers by using boundary element methods and optimization algorithms , 2016 .

[6]  Rickard Bensow,et al.  Computational Analysis of Cavitating Marine Propeller Performance using OpenFOAM , 2015 .

[7]  Giorgio Tani,et al.  A study on the numerical prediction of propellers cavitating tip vortex , 2014 .

[8]  Diego Villa,et al.  An Investigation on the Discrepancies Between RANSE and BEM Approaches for the Prediction of Marine Propeller Unsteady Performances in Strongly Non-Homogeneous Wakes , 2014 .

[9]  R. Bensow,et al.  Large eddy simulation of cavitation development on highly skewed propellers , 2014 .

[10]  Giulio Dubbioso,et al.  Analysis of a marine propeller operating in oblique flow. Part 2: Very high incidence angles , 2014 .

[11]  Giulio Dubbioso,et al.  Analysis of the performances of a marine propeller operating in oblique flow , 2013 .

[12]  Cesare Mario Rizzo,et al.  EFD and CFD Design and Analysis of a Propeller in Decelerating Duct , 2012 .

[13]  Stefano Brizzolara,et al.  CPP propeller cavitation and noise optimization at different pitches with panel code and validation by cavitation tunnel measurements , 2012 .

[14]  Mitja Morgut,et al.  Numerical Predictions of Cavitating Flow around Model Scale Propellers by CFD and Advanced Model Calibration , 2012 .

[15]  Stefano Brizzolara,et al.  EFD and CFD Characterization of a CLT Propeller , 2012 .

[16]  Mitja Morgut,et al.  Influence of grid type and turbulence model on the numerical prediction of the flow around marine propellers working in uniform inflow , 2012 .

[17]  Timo Siikonen,et al.  FINFLO RANS-Predictions for Propeller Performance , 2011 .

[18]  Mitja Morgut,et al.  Numerical Predictions of the Cavitating and Non-Cavitating Flow around the Model Scale Propeller PPTC , 2011 .

[19]  Patrick E. Farrell,et al.  Conservative interpolation between volume meshes by local Galerkin projection , 2011 .

[20]  Stefano Brizzolara,et al.  RANS and PANEL method for unsteady flow propeller analysis , 2010 .

[21]  R. Bensow,et al.  Implicit LES Predictions of the Cavitating Flow on a Propeller , 2010 .

[22]  Rickard Bensow,et al.  SIMULATING CAVITATING FLOWS WITH LES IN OPENFOAM , 2010 .

[23]  J. Franc,et al.  Fundamentals of Cavitation , 2004 .

[24]  H. Rusche.  Computational fluid dynamics of dispersed two-phase flows at high phase fractions , 2003 .

[25]  Olivier Coutier-Delgosha,et al.  Evaluation of the turbulence model influence on the numerical simulations of unsteady cavitation , 2001 .

[26]  D. R. Stinebring,et al.  A preconditioned Navier–Stokes method for two-phase flows with application to cavitation prediction , 2000 .

[27]  C. Merkle,et al.  Computational modeling of the dynamics of sheet cavitation , 1998 .

[28]  F. Menter.  Two-equation eddy-viscosity turbulence models for engineering applications , 1994 .

[29]  S. Kinnas,et al.  A numerical nonlinear analysis of the flow around two- and three-dimensional partially cavitating hydrofoils , 1993, Journal of Fluid Mechanics.

[30]  Ching-Yeh Hsin,et al.  Development and analysis of panel methods for propellers in unsteady flow , 1990 .

[31]  G. Kuiper,et al.  Cavitation inception on ship propeller models , 1981 .

[32]  L. Morino,et al.  Subsonic Potential Aerodynamics for Complex Configurations: A General Theory , 1974 .