The effect of transverse low-velocity pre-impact on the residual strength of Al/PEEK/CFRTP adhesive joints

[1]  B. Mellor,et al.  Mechanism of oil-lubrication of PEEK and its composites with steel counterparts , 2021, Wear.

[2]  D. Cronin,et al.  Mechanical Testing of Adhesive, Self-Piercing Rivet, and Hybrid Jointed Aluminum Under Tension Loading , 2021, International Journal of Adhesion and Adhesives.

[3]  Zhenyuan Jia,et al.  Influence of processing parameters on joint shear performance in laser direct joining of CFRTP and aluminum alloy , 2021 .

[4]  Yibo Li,et al.  Effect of anodizing surface morphology on the adhesion performance of 6061 aluminum alloy , 2021, International Journal of Adhesion and Adhesives.

[5]  Jun Zhao,et al.  Influence of salt fog and ambient condition exposure on cfrp-to-steel bonded joints , 2021, Composite Structures.

[6]  Zhongxiang Pan,et al.  A novel damage mechanism analysis of integrally braided CFRP and CFRP/Aluminum hybrid composite tube subjected to transverse impact , 2021 .

[7]  L. Sheng,et al.  Carbon fiber reinforced thermoplastic composites and TC4 alloy laser assisted joining with the metal surface laser plastic-covered method , 2021 .

[8]  L. Sun,et al.  Effects of low-energy impact at different temperatures on residual properties of adhesively bonded single-lap joints with composites substrates , 2021, Composite Structures.

[9]  Xiuhua Chen,et al.  A novel experiment-based approach on nonlinear bending analysis of thermoplastic composite laminates , 2021 .

[10]  Qing Li,et al.  Fatigue behavior of carbon fibre reinforced plastic and aluminum single-lap adhesive joints after the transverse pre-impact , 2020 .

[11]  J. P. Casas-Rodriguez,et al.  A dynamic response analysis of adhesive - Bonded single lap joints used in military aircrafts made of glass fiber composite material undercyclic impact loading , 2020 .

[12]  Changyu Shen,et al.  Additive manufacturing of continuous carbon fiber reinforced poly-ether-ether-ketone with ultrahigh mechanical properties , 2020 .

[13]  Chao Chen,et al.  Effect of hygrothermal-mechanical exposure on the residual strength of adhesively bonded joints , 2020 .

[14]  Yibo Li,et al.  Experimental-numerical analysis of failure of adhesively bonded lap joints under transverse impact and different temperatures , 2020, International Journal of Impact Engineering.

[15]  Minghui Huang,et al.  The effect of moulding process parameters on interlaminar properties of CF/PEEK composite laminates , 2020 .

[16]  Guangyao Li,et al.  Effects of loading rates on mechanical property and failure behavior of single-lap adhesive joints with carbon fiber reinforced plastics and aluminum alloys , 2020 .

[17]  B. O. Baba,et al.  Mechanical response of adhesively bonded composite joints subjected to vibration load and axial impact , 2019, Composites Part B: Engineering.

[18]  Qing Li,et al.  Failure mechanisms in carbon fiber reinforced plastics (CFRP) / aluminum (Al) adhesive bonds subjected to low-velocity transverse pre-impact following by axial post-tension , 2019, Composites Part B: Engineering.

[19]  Yibo Li,et al.  Surface Treatment for Improving Durability of Aluminum-Lithium Adhesive-Bonded Joints under Hot-Humid Exposure , 2019, Coatings.

[20]  Yibo Li,et al.  Effect of combined surface treatment on the adhesion performance of aluminium-lithium alloy , 2019, Journal of Adhesion Science and Technology.

[21]  Yibo Li,et al.  Improvement of aluminum lithium alloy adhesion performance based on sandblasting techniques , 2018, International Journal of Adhesion and Adhesives.

[22]  Qiang Liu,et al.  Experimental study on crashworthiness of empty/aluminum foam/honeycomb-filled CFRP tubes , 2016 .

[23]  S. T. Amancio-Filho,et al.  Failure and fracture micro-mechanisms in metal-composite single lap joints produced by welding-based joining techniques , 2016 .

[24]  R. S. Choudhry,et al.  Damage in single lap joints of woven fabric reinforced polymeric composites subjected to transverse impact loading , 2015 .

[25]  O. Sayman,et al.  Failure analysis of adhesively bonded composite joints under transverse impact and different temperatures , 2013 .

[26]  Lijuan Liao,et al.  Experimental and FEM studies on mechanical properties of single-lap adhesive joint with dissimilar adherends subjected to impact tensile loadings , 2013 .

[27]  Chao Lu,et al.  Finite Element Modeling of the Geometry Size Effect for Adhesive Joints Strength , 2010 .

[28]  M. D. Thouless,et al.  The effects of geometry and material properties on the fracture of single lap-shear joints , 2002 .

[29]  Behrens Bernd-Arno,et al.  Forming and Joining of Carbon-Fiber-Reinforced Thermoplastics and Sheet Metal in One Step , 2017 .

[30]  Michael Schmidt,et al.  Laser Transmission Welding of CFRTP Using Filler Material , 2014 .

[31]  Andreas Öchsner,et al.  Handbook of adhesion technology , 2011 .