We hoped to determine the number of pulses and energy needed to create acute ureteral perforations with four different lithotripters in a reproducible ex vivo model. A simple model was constructed to control variables in the testing such as wall thickness, intraluminal pressure, distance between the probe tip and ureter, and power delivered to tissue. Segments of domestic pig ureter were prepared and fixed in position in a normal saline (NS) bath at room temperature. We then attempted perforation with the holmium:YAG (HoL) laser, coumarin pulsed-dye laser (CdL), electrohydraulic lithotripter (EHL), and pneumatic impactor (PI) by placing the instrument probes at right angles to the ureteral wall. The ureter was filled with a methylene blue-stained solution of NS at 90 cm H2O pressure via a urodynamics catheter, and perforation was recorded on initial extravasation of dye. The endpoints measured were time to perforation and total energy required. At 0.5 mm of separation between the wall and probe, the HoL perforated the ureter in an average of 2 seconds and 0.01 kJ delivered at 5 W (10 Hz and 0.5 J/pulse). The EHL perforated at an average of 24.44 +/- 8.77 seconds and a total energy of 0.01 +/- 0 kJ. The CdL was able to perforate but at much longer intervals (257.51 +/- 99.08 seconds) and higher energy levels (12.88 +/- 4.95 kJ) on average than either the EHL or HoL. Lastly, the PI was unable to perforate the ureter in more than 6 continuous minutes of application. In addition, we found that at 2-mm separation between the HoL probe tip and the ureteral wall, acute perforation was not possible even at very high power settings. We conclude that although each endoscopic lithotripter has advantages as well as disadvantages, in this ex vivo model, it was clear that the HoL and EHL can easily perforate the ureter and must be used with vigilance. It was found that at 2 mm of separation between the probe and target, the HoL, was unable to perforate acutely. The CdL and PI were associated with a much higher safety index, and the PI was unable to produce ureteral perforation.
[1]
R. Clayman,et al.
Electrohydraulic lithotripsy of renal and ureteral calculi.
,
1990,
Journal of Urology.
[2]
S. Dretler,et al.
An evaluation of ureteral laser lithotripsy: 225 consecutive patients.
,
1990,
The Journal of urology.
[3]
P. Teillac,et al.
Ureteral and bladder lesions after ballistic, ultrasonic, electrohydraulic, or laser lithotripsy.
,
1994,
Journal of endourology.
[4]
D. Grignon,et al.
Investigation of the tissue effects of a new device for intracorporeal lithotripsy--the Swiss Lithoclast.
,
1995,
The Journal of urology.
[5]
R. Clayman,et al.
Comparative ureteral microanatomy.
,
1996,
Journal of endourology.
[6]
M. Zerbib,et al.
Effects of pulsed dye laser lithotripsy on tissues. Experimental study in the canine ureter.
,
1988,
The Urologic clinics of North America.
[7]
J. Parrish,et al.
An assessment of the pulsed dye laser for fragmenting calculi in the pig ureter.
,
1987,
The Journal of urology.
[8]
T. Senge,et al.
The Swiss Lithoclast: a new device for endoscopic stone disintegration.
,
1993,
The Journal of urology.
[9]
S. Dretler,et al.
The electromechanical impactor: the results of design modifications.
,
1993,
The Journal of urology.
[10]
S. Dretler,et al.
Laser lithotripsy: A review of 20 years of research and clinical applications
,
1988,
Lasers in surgery and medicine.