Substrate transfer for RF technologies

The constant pressure on performance improvement in RF processes is aimed at higher frequencies, less power consumption, and a higher integration level of high quality passives with digital active devices. Although excellent for the fabrication of active devices, it is the silicon substrate as a carrier that is blocking breakthroughs. Since all devices on a silicon wafer have a capacitive coupling to the resistive substrate, this results in a dissipation of RF energy, poor quality passives, cross-talk, and injection of thermal noise. We have developed a low-cost wafer-scale post-processing technology for transferring circuits, fabricated with standard IC processing, to an alternative substrate, e.g., glass. This technique comprises the gluing of a fully processed wafer, top down, to an alternative carrier followed by either partial or complete removal of the original silicon substrate. This effectively removes the drawbacks of silicon as a circuit carrier and enables the integration of high-quality passive components and eliminates cross-talk between circuit parts. A considerable development effort has brought this technology to a production-ready level of maturity. Batch-to-batch production equipment is now available and the technology and know-how are being licensed. In this paper, we present four examples to demonstrate the versatility of substrate transfer for RF applications.

[1]  R. Dekker.  Silicon Process Technology Innovations for Low Power RF Applications , 1998, 28th European Solid-State Device Research Conference.

[2]  R. Dekker,et al.  An ultra low power lateral bipolar polysilicon emitter technology on SOI , 1993, Proceedings of IEEE International Electron Devices Meeting.

[3]  P. Baltus,et al.  An ultra low-power RF bipolar technology on glass , 1997, International Electron Devices Meeting. IEDM Technical Digest.

[4]  H. Chen,et al.  A 210-GHz f/sub T/ SiGe HBT with a non-self-aligned structure , 2001, IEEE Electron Device Letters.

[5]  Johan van der Tang,et al.  A monolithic 0.4 mW SOA LC voltage–controlled oscillator , 1999 .

[6]  H.G.A. Huizing,et al.  Influence of output impedance on power added efficiency of Si-bipolar power transistors , 2000, 2000 IEEE MTT-S International Microwave Symposium Digest (Cat. No.00CH37017).

[7]  J.W. Slotboom,et al.  Ultra-low-temperature low-ohmic contacts for SOA applications , 1999, Proceedings of the 1999 Bipolar/BiCMOS Circuits and Technology Meeting (Cat. No.99CH37024).

[8]  T. Iwamatsu,et al.  Feasibility of 0.18 /spl mu/m SOI CMOS technology using hybrid trench isolation with high resistivity substrate for embedded RF/analog applications , 2001 .

[9]  S. Jeng,et al.  Self-aligned SiGe NPN transistors with 285 GHz f/sub MAX/ and 207 GHz f/sub T/ in a manufacturable technology , 2002, IEEE Electron Device Letters.

[10]  R.R. Siergiej,et al.  MICROX-an all-silicon technology for monolithic microwave integrated circuits , 1993, IEEE Electron Device Letters.

[11]  Armand Pruijmboom,et al.  18 ps ECL-gate delay in laterally scaled 30 GHz bipolar transistors , 1994, Proceedings of 1994 IEEE International Electron Devices Meeting.

[12]  C.C. Wu,et al.  RF loss and crosstalk on extremely high resistivity (10 k-1 M/spl Omega/-cm) Si fabricated by ion implantation , 2000, 2000 IEEE MTT-S International Microwave Symposium Digest (Cat. No.00CH37017).

[13]  J.W. Slotboom,et al.  77% power added efficiency surface-mounted bipolar power transistors for low-voltage wireless applications , 2000, Proceedings of the 2000 BIPOLAR/BiCMOS Circuits and Technology Meeting (Cat. No.00CH37124).

[14]  Mark J. W. Rodwell,et al.  Submicron scaling of HBTs , 2001 .

[15]  Robert G. Meyer,et al.  Future directions in silicon ICs for RF personal communications , 1995, Proceedings of the IEEE 1995 Custom Integrated Circuits Conference.

[16]  Asad A. Abidi.  Direct-conversion radio transceivers for digital communications , 1995 .

[17]  P.G.M. Baltus,et al.  Optimizing RF front ends for low power , 2000, Proceedings of the IEEE.

[18]  A. Wagemans,et al.  A 3.5 mW 2.5 GHz diversity receiver and a 1.2 mW 3.6 GHz VCO in silicon-on-anything , 1998, 1998 IEEE International Solid-State Circuits Conference. Digest of Technical Papers, ISSCC. First Edition (Cat. No.98CH36156).

[19]  M. E. Wood,et al.  Comparison of microwave inductors fabricated on silicon-on-sapphire and bulk silicon , 1996 .

[20]  N. Nenadovic,et al.  A novel vertical DMOS transistor in SOA technology for RF-power applications , 2002, 2002 23rd International Conference on Microelectronics. Proceedings (Cat. No.02TH8595).

[21]  Thin-film GaAs solar cells by epitaxial lift-off , 1993, Conference Record of the Twenty Third IEEE Photovoltaic Specialists Conference - 1993 (Cat. No.93CH3283-9).

[22]  P. M. Asbeck,et al.  Advanced thin-film silicon-on-sapphire technology: microwave circuit applications , 1998 .

[23]  R. Dekker,et al.  A low-cost substrate transfer technology for fully integrated transceivers , 1998, Proceedings of the 1998 Bipolar/BiCMOS Circuits and Technology Meeting (Cat. No.98CH36198).

[24]  Keith A. Jenkins,et al.  An 11-GHz 3-V SiGe voltage-controlled oscillator with integrated resonator , 1996, Proceedings of the 1996 BIPOLAR/BiCMOS Circuits and Technology Meeting.

[26]  Thin film GaAs solar cells on glass substrates by epitaxial liftoff , 1996, Conference Record of the Twenty Fifth IEEE Photovoltaic Specialists Conference - 1996.

[27]  CMOS on FZ-high resistivity substrate for monolithic integration of SiGe-RF-circuitry and readout electronics , 1997 .

[28]  A. B. M. Jansman,et al.  The integration of RF passives using thin-film technology on high-ohmic Si in combination with thick-film interconnect , 2001 .

[29]  Asad A. Abidi.  Radio-frequency integrated circuits for portable communications , 1994, Proceedings of IEEE Custom Integrated Circuits Conference - CICC '94.