Analytical and experimental investigation on the magnetic field and torque of a permanent magnet spherical actuator

This paper presents the torque model of a ball-joint-like three-degree-of-freedom (3-DOF) permanent magnet (PM) spherical actuator. This actuator features a ball-shaped rotor with multiple PM poles and a spherical stator with circumferential air-core coils. An analytical expression of the magnetic field of the rotor is obtained based on Laplace's equation. Based on this expression and properties of air-core stator coils, Lorentz force law is employed for the study of the relationship between the rotor torque and coil input currents. By using linear superposition, the expression of the actuator torque in terms of current input to the stator coils can be obtained in a matrix form. The linear expression of the actuator torque will facilitate real-time motion control of the actuator as a servo system. Experimental works are carried out to measure the actual magnetic field distribution of the PM rotor in three-dimensional (3-D) space as well as to measure the actual 3-D motor torque generated by the actuator coils. The measurement results were coincident with analytical study on the rotor magnetic field distribution and actuator torque expressions. The linearity and superposition of the actuator torque were also verified through the experiments

[1]  F. C. Williams,et al.  Development and design of spherical induction motors , 1959 .

[2]  Kent Davey,et al.  The analysis of fields and torques in spherical induction motors , 1987 .

[3]  G. Vachtsevanos,et al.  Development of a novel intelligent robotic manipulator , 1987, IEEE Control Systems Magazine.

[4]  Kok-Meng Lee,et al.  Design concept development of a spherical stepper for robotic applications , 1991, IEEE Trans. Robotics Autom..

[5]  Zhi Zhou,et al.  Dynamic Modeling and Control of a Ball-Joint-Like Variable-Reluctance Spherical Motor , 1996 .

[6]  G.W. Jewell,et al.  A Novel Spherical Actuator Design And Control , 1997, 1997 IEEE International Magnetics Conference (INTERMAG'97).

[7]  D. Howe,et al.  Analysis, design and control of a novel spherical permanent-magnet actuator , 1998 .

[8]  D. Howe,et al.  A novel spherical permanent magnet actuator with three degrees-of-freedom , 1998 .

[9]  Gregory S. Chirikjian,et al.  Kinematic design and commutation of a spherical stepper motor , 1999 .

[10]  Kyong Sei Lee,et al.  Effects of the Torque Model on the Control of a VR Spherical Motor , 2002 .

[11]  D. Howe,et al.  Design and control of a novel spherical permanent magnet actuator with three degrees of freedom , 2003 .

[12]  R.W. De Doncker,et al.  Torque control of a spherical machine with variable pole pitch , 2004, IEEE Transactions on Power Electronics.

[13]  K. Lee,et al.  Experimental Investigation on the Magnetic Field of a Permanent Magnet Spherical Actuator , 2005, AIM 2005.

[14]  Kyong Sei Lee,et al.  Torque Model for Design and Control of a Spherical Wheel Motor , 2005, AIM 2005.

[15]  Guilin Yang,et al.  Design & Analysis of a New Variable Stator Pole for a DC Spherical Actuator , 2005, AIM 2005.

[16]  Liang Yan,et al.  Torque Modeling of a Spherical Actuator Based on Lorentz Force Law , 2005, Proceedings of the 2005 IEEE International Conference on Robotics and Automation.

[17]  Kok-Meng Lee,et al.  Concept Development and Design of a Spherical Wheel Motor (SWM) , 2005, Proceedings of the 2005 IEEE International Conference on Robotics and Automation.