Load-sharing between two paralleled UPS systems using Model Predictive Control

Increasing the power rating and reliability of a power conversion system are the main reasons for the parallel operation of power electronics converters. However, when linked in parallel, the converters are subjected to a circulating current that compromises optimum system operation. Moreover, due to efficiency and flexibility reasons, a strategy for power-sharing is crucial. This paper proposes a Finite Control Set Model Predictive Control (FCS-MPC) scheme for two parallel connected Uninterruptible Power Supply (UPS) systems based on two 3-Level Neutral Point Clamped (3LNPC) converters. With the proposed control scheme, a precise load-sharing can be defined, with different power being supplied by each UPS system. Simultaneously, the Zero Sequence Circulating Current (ZSCC) can be effectively suppressed. Simulation results validate the proposed control scheme.

[1]  Zhao Zhengming,et al.  A novel control scheme for three-level NPC back-to-back converter , 2008, 2008 IEEE Vehicle Power and Propulsion Conference.

[2]  Sergio M. A. Cruz,et al.  Cooperative and Dynamically Weighted Model Predictive Control of a 3-Level Uninterruptible Power Supply With Improved Performance and Dynamic Response , 2020, IEEE Transactions on Industrial Electronics.

[3]  Rooh Ul Amin Shaikh,et al.  Analysis of field oriented controlled AC drive fed by a back-to-back three level NPC converter , 2017, 2017 First International Conference on Latest trends in Electrical Engineering and Computing Technologies (INTELLECT).

[4]  Felipe Espinosa,et al.  Calculation of the DC-bus Capacitors of the Back-to-back NPC Converters , 2006, 2006 12th International Power Electronics and Motion Control Conference.

[5]  S. Bernet,et al.  A comparison of three-level converters versus two-level converters for low-voltage drives, traction, and utility applications , 2005, IEEE Transactions on Industry Applications.

[6]  Fei Wang,et al.  A Control Strategy for Suppressing Circulating Currents in Parallel-Connected PMSM Drives With Individual DC Links , 2016, IEEE Transactions on Power Electronics.

[7]  Juan C. Vasquez,et al.  Elimination of zero sequence circulating current between parallel operating three-level inverters , 2016, IECON 2016 - 42nd Annual Conference of the IEEE Industrial Electronics Society.

[8]  Jianxiao Zou,et al.  Elimination of zero sequence circulating currents in paralleled three‐level T‐type inverters with a model predictive control strategy , 2018, IET Power Electronics.

[9]  Yun Wei Li,et al.  A Three-Level Space Vector Modulation Scheme for Paralleled Converters to Reduce Circulating Current and Common-Mode Voltage , 2017, IEEE Transactions on Power Electronics.

[10]  Alian Chen,et al.  Model predictive control for parallel three-level T-type grid-connected inverters in renewable power generations , 2017 .

[11]  Thanga Raj Chelliah,et al.  Effective Utilization of Parallel Connected Megawatt Three-Level Back-to-Back Power Converters in Variable Speed Pumped Storage Units , 2018, 2018 IEEE Industry Applications Society Annual Meeting (IAS).