Electrical performance evaluation of plasticized polyolefin formulation developed for manufacturing surge arresters housings

The performance and reliability of the electric power systems can be enhanced with the development of new polymer formulations, offering new concepts in equipment housing design and application. This paper reports the electrical and physicochemical properties of plasticized formulations based on HDPE, developed specifically for surge arresters housings. Plasticized HDPE surge arrester housings, 15 kV, were manufactured at ISO-9001 by one-shot injection molding technique. HDPE housed surge arresters were submitted to performance tests according to IEC 60.099-4 and exposed to artificial electrical aging tests and then physicochemically and electrically characterized. The physicochemical characterization comprised analysis by Fourier transform infrared (FTIR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), wide-angle X-ray diffraction (WAXRD), scanning electron microscopy (SEM), atomic force microscopy (AFM) and contact angle measurements. The FTIR results confirm the microstructural modifications of the aged HDPE due to oxidation phenomena, probably involving the formation of alcohol or carboxylic groups at surface level of surge arresters housings. The DSC technique shows no significant variation of the HDPE amorphous and crystalline content as a function of the electrical aging conditions. The TGA kinetics analysis shows significant changes in the activation energy for thermal degradation of the electrical aged and unaged HDPE surge arresters housings. The results obtained have demonstrated that the plasticized HDPE formulation has good stability at high electrical field and appears to be suitable for use in manufacturing surge arresters housings.

[1]  D. Baird,et al.  Melt Processability and Foam Suppression of High Molecular Weight Polyethylenes Plasticized with Supercritical Carbon Dioxide , 2008 .

[2]  M. Schliwa,et al.  Rheology , 2008, Current Biology.

[3]  Vasily Y. Ushakov,et al.  Insulation of High-Voltage Equipment , 2004 .

[4]  T. Seguchi,et al.  Product analysis for polyethylene degradation by radiation and thermal ageing , 2013 .

[5]  E. Oleinik.  Plasticity of semicrystalline flexible-chain polymers at the microscopic and mesoscopic levels , 2003 .

[6]  M. Amin,et al.  The Electric Power Grid: Today and Tomorrow , 2008 .

[7]  Charles E. Carraher,et al.  Applied polymer science : 21st century , 2000 .

[8]  Steven A. Boggs,et al.  Evaluation of surface degradation of silicone rubber using gas chromatography/mass spectroscopy , 2000 .

[9]  Ravindra Arora,et al.  High Voltage and Electrical Insulation Engineering , 2011 .

[10]  H. Rubahn,et al.  Organic nanostructures for next generation devices , 2008 .

[11]  M. Zanetti,et al.  Stabilisation of ultra-high molecular weight polyethylene with Vitamin E , 2007 .

[12]  Yongrong Yang,et al.  Effects of thermo‐oxidative aging on chain mobility, phase composition, and mechanical behavior of high‐density polyethylene , 2011 .

[13]  Jianying Li,et al.  Short-term breakdown and long-term failure in nanodielectrics: a review , 2010, IEEE Transactions on Dielectrics and Electrical Insulation.

[14]  P. F. Onyon.  Polymer Handbook , 1972, Nature.

[15]  Z. Guan,et al.  Effects of crystallinity on the space charge properties of polyethylene , 2005 .

[16]  Giovanni Mazzanti,et al.  Extruded Cables For High-Voltage Direct-Current Transmission , 2013 .

[17]  L. Valle,et al.  Thermo-Oxidative Degradation of HDPE as a Function of Its Crystalline Content , 2009 .

[18]  E. Pavlidou,et al.  Thermal degradation mechanism of HDPE nanocomposites containing fumed silica nanoparticles , 2009 .

[19]  Cornelia Vasile.  Handbook of Polyolefins , 2000 .

[20]  M. Das,et al.  THERMOGRAVIMETRIC ANALYSIS AND WEATHERING STUDY BY WATER IMMERSION OF ALKALI TREATED BAMBOO FIBRES , 2008 .

[21]  V. Vahedy,et al.  Polymer insulated high voltage cables , 2006, IEEE Electrical Insulation Magazine.

[22]  N. A. Halfter,et al.  Underground Power Cables , 1982 .

[23]  A. Vaughan,et al.  Influence of morphology on electrical treeing in polyethylene blends , 2003 .

[24]  A. Peacock.  Handbook of Polyethylene: Structures: Properties, and Applications , 2000 .

[25]  B. Marungsri,et al.  Ageing Deterioration of Hi gh-Density Polyethylene Cable Spacer under Salt Water Dip Wheel Test , 2014 .

[26]  J. Liu,et al.  A Novel Electrical Insulating Material for 275 kV High-Voltage HTS Cable with Low Dielectric Loss , 2014 .

[27]  D. Demco,et al.  Morphology, Chain Dynamics, and Domain Sizes in Highly Drawn Gel-Spun Ultrahigh Molecular Weight Polyethylene Fibers at the Final Stages of Drawing by SAXS, WAXS, and 1H Solid-State NMR , 2011 .

[28]  Nidal Hilal,et al.  Atomic Force Microscopy in Process Engineering: An Introduction to AFM for Improved Processes and Products , 2009 .

[29]  Alun S. Vaughan,et al.  On the effects of morphology and molecular composition on the electrical strength of polyethylene blends , 2000 .

[30]  Rui Yang,et al.  Effects of inorganic fillers on the natural photo-oxidation of high-density polyethylene , 2005 .

[31]  R. Caminiti,et al.  Polyethylene Structure as a Function of Temperature: An EDXD Investigation , 2006 .

[32]  G. Montanari,et al.  Modification of electrical properties and performance of EVA and PP insulation through nanostructure by organophilic silicates , 2004, IEEE Transactions on Dielectrics and Electrical Insulation.

[33]  S. Parker,et al.  The vibrational spectrum and ultimate modulus of polyethylene , 2006 .

[34]  M. Amin,et al.  HYDROPHOBICITY OF SILICONE RUBBER USED FOR OUTDOOR INSULATION (AN OVERVIEW) , 2007 .

[35]  P.H.F. Morshuis,et al.  Degradation of solid dielectrics due to internal partial discharge: some thoughts on progress made and where to go now , 2005, IEEE Transactions on Dielectrics and Electrical Insulation.

[36]  K. Chrzan,et al.  Influence of moisture and partial discharges on the degradation of high-voltage surge arresters , 2004 .

[37]  F. Perrot,et al.  Effects of electric partial discharges on the rheological and chemical properties of polymers used in HV composite insulators after railway service , 2009, IEEE Transactions on Dielectrics and Electrical Insulation.

[38]  G. Montanari,et al.  Polymer nanocomposites as dielectrics and electrical insulation-perspectives for processing technologies, material characterization and future applications , 2004, IEEE Transactions on Dielectrics and Electrical Insulation.

[39]  R. Caminiti,et al.  Structure of Polyethylene from X-Ray Powder Diffraction: Influence of the Amorphous Fraction on Data Analysis , 2000 .

[40]  M. Razzaghi‐Kashani,et al.  Effect of organo-clay on the dielectric relaxation response of silicone rubber , 2010 .

[41]  F. Schmuck,et al.  Improved silicone rubbers for the use as housing material in composite insulators , 2012, IEEE Transactions on Dielectrics and Electrical Insulation.

[42]  M. Chaudhury,et al.  Interfacial Lifshitz-van der Waals and polar interactions in macroscopic systems , 1988 .

[43]  Yunheng Ji.  MORPHOLOGY , 1937, A Grammar of Italian Sign Language (LIS).

[44]  B. Pukánszky,et al.  Processing stability of high density polyethylene: effect of adsorbed and dissolved oxygen , 2000 .

[45]  Jun-gang Gao,et al.  Rheology, Crystallization Kinetics and Mechanical Properties of HDPE/Vinyl-POSS Nanocomposites , 2011 .

[46]  H. Ploehn,et al.  Polymer Composite and Nanocomposite Dielectric Materials for Pulse Power Energy Storage † , 2009, Materials.

[47]  C. Hansen.  Hansen Solubility Parameters: A User's Handbook , 1999 .

[48]  William A. Thue,et al.  Electrical Power Cable Engineering, Third Edition , 2016 .

[49]  S. Sathyamurthy,et al.  Electrical properties of epoxy resin based nano-composites , 2007 .

[50]  Yi Wang,et al.  Effect of deep trapping states on space charge suppression in polyethylene/ZnO nanocomposite , 2011 .

[51]  D. Tu,et al.  Insulation performance and microstructure in modified polyethylene by MPE , 2008 .

[52]  R. Nath,et al.  Effect of crystallinity on charge storage in polypropylene and polyethylene , 1988, 6th International Symposium on Electrets,(ISE 6) Proceedings..

[53]  T. Takada,et al.  Space charge trapping in electrical potential well caused by permanent and induced dipoles for LDPE/MgO nanocomposite , 2008, IEEE Transactions on Dielectrics and Electrical Insulation.

[54]  G. Heger,et al.  A comparative study of insulator materials exposed to high voltage AC and DC surface discharges , 2010, IEEE Transactions on Dielectrics and Electrical Insulation.

[55]  P. Hedvig.  Electrical properties of polymers , 1977, Digest of Literature on Dielectrics Volume 42 1978.

[56]  B. D. Favis,et al.  High molecular weight plasticizers in thermoplastic starch/polyethylene blends , 2013, Journal of Materials Science.

[57]  E. Cherney.  Silicone rubber dielectrics modified by inorganic fillers for outdoor high voltage insulation applications , 2005, CEIDP '05. 2005 Annual Report Conference on Electrical Insulation and Dielectric Phenomena, 2005..

[58]  M. Ikeda,et al.  Electrical properties and morphology of polyethylene produced with a novel catalyst , 2004, IEEE Transactions on Dielectrics and Electrical Insulation.

[59]  C. Laurent,et al.  Advances in high-field insulating polymeric materials over the past 50 years , 2013, IEEE Electrical Insulation Magazine.

[60]  L. Schadler,et al.  The mechanisms leading to the useful electrical properties of polymer nanodielectrics , 2008, IEEE Transactions on Dielectrics and Electrical Insulation.

[61]  Daniel Y. Kwok,et al.  Contact angle measurement and contact angle interpretation , 1999 .