Oxygen sensor via the quenching of room-temperature phosphorescence of perdeuterated phenanthrene adsorbed on Whatman 1PS filter paper.

Perdeuterated phenanthrene (d-phen) exhibits strong room-temperature phosphorescence (RTP) when adsorbed on Whatman 1PS filter paper. An oxygen sensor was developed that depends on oxygen quenching of RTP intensity of adsorbed d-phen. The system designed employed a continuous flow of nitrogen or nitrogen-air onto the adsorbed phosphor. The sensor is simple to prepare and needs no elaborate fabrication procedure, but did show a somewhat drifting baseline for successive determinations of oxygen. Nevertheless, very good reproducibility was achieved with the RTP quenching data by measuring the RTP intensities just before and at the end of each oxygen determination. The calibration plots gave a nonlinear relationship over the entire range of oxygen (0-21%). However, a linear range was obtained up to 1.10% oxygen. A detection limit of 0.09% oxygen in dry nitrogen was acquired. Also, carbon dioxide was found to have a minimal effect on the RTP quenching. Thus, oxygen could be measured accurately in relatively large amounts of carbon dioxide. The performance of the oxygen sensor was evaluated by comparing data obtained with a commercial electrochemical trace oxygen analyzer. Also, additional information on the quenching phenomena for this system was obtained from the RTP lifetime data acquired at various oxygen contents.

[1]  R. J. Hurtubise,et al.  Separation and characterization of tetrol metabolites of benzo[a]pyrene-DNA adducts using HPLC and solid-matrix room temperature luminescence. , 1995, Talanta.

[2]  J. Demas,et al.  Oxygen Sensors Based on Luminescence Quenching: Interactions of Tris(4,7-diphenyl-1,10-phenanthroline)ruthenium(II) Chloride and Pyrene with Polymer Supports , 1997 .

[3]  P. Hartmann,et al.  Effects of polymer matrices on calibration functions of luminescent oxygen sensors based on porphyrin ketone complexes. , 1996, Analytical chemistry.

[4]  R. Kopelman,et al.  Development of a submicrometer optical fiber oxygen sensor. , 1995, Analytical chemistry.

[5]  Dinh Tuan Vo Room temperature phosphorimetry for chemical analysis , 1984 .

[6]  Gelii V. Ponomarev,et al.  Phosphorescent Complexes of Porphyrin Ketones: Optical Properties and Application to Oxygen Sensing , 1995 .

[7]  I. Okura,et al.  Photoluminescent oxygen sensing on a specific surface area using phosphorescence quenching of Pt-porphyrin , 1997 .

[8]  R. J. Hurtubise,et al.  The solid-matrix room-temperature luminescence detection and characterization of polyaromatic hydrocarbons without a heavy atom. , 1994, Talanta.

[9]  R. J. Hurtubise Phosphorimetry: Theory, Instrumentation, and Applications , 1990 .

[10]  Marta Elena Díaz-García,et al.  Optical oxygen sensing materials based on the room-temperature phosphorescence intensity quenching of immobilized Erythrosin B , 1995 .

[11]  Alfredo Sanz-Medel,et al.  Oxygen Sensing Based on the Room Temperature Phosphorescence Intensity Quenching of Some Lead–8-hydroxyquinoline Complexes , 1997 .

[12]  Andrew Mills,et al.  Use of luminescent gold compounds in the design of thin-film oxygen sensors , 1997 .

[13]  Alfredo Sanz-Medel,et al.  Evaluation of some immobilized room-temperature phosphorescent metal chelates as sensing materials for oxygen , 1994 .

[14]  R. J. Hurtubise,et al.  The Effects of Salts on the Room-Temperature Fluorescence and Room-Temperature Phosphorescence of Tetrols on Filter Paper and Filter Paper with Silicone , 1993 .

[15]  James P. Collman,et al.  Surface Acoustic Wave Oxygen Sensor , 1994 .

[16]  P. Hawkins,et al.  A novel oxygen and/or carbon dioxide-sensitive optical transducer. , 1995, Talanta.

[17]  R. J. Hurtubise,et al.  Comparative Study of the Solid-Matrix Luminescence Properties of Perdeuterated Phenanthrene and Phenanthrene Adsorbed on Several Solid Matrices , 1996 .