Combustion and emissions study on motorcycle engine fueled with butanol-gasoline blend

[1]  Eleonore G. Kayser.  Chemical and photographic evaluation of rigid explosive transfer lines , 1986 .

[2]  John B. Heywood,et al.  Internal combustion engine fundamentals , 1988 .

[3]  F. N. Alasfour.  Butanol—A single-cylinder engine study: availability analysis , 1997 .

[4]  E. A. Ajav,et al.  Performance of a stationary diesel engine using vapourized ethanol as supplementary fuel , 1998 .

[5]  F. N. Alasfour.  NOx Emission from a spark ignition engine using 30% Iso-butanol–gasoline blend: Part 1—Preheating inlet air , 1998 .

[6]  F. N. Alasfour.  NOx EMISSION FROM A SPARK IGNITION ENGINE USING 30% ISO-BUTANOL–GASOLINE BLEND: PART 2—IGNITION TIMING , 1998 .

[7]  F. N. Alasfour.  The effect of using 30% iso-butanol-gasoline blend on hydrocarbon emissions from a spark-ignition engine , 1999 .

[8]  Bernard Challen,et al.  Diesel engine reference book , 1999 .

[9]  M. Chao,et al.  Effect of methanol-containing additive on the emission of carbonyl compounds from a heavy-duty diesel engine. , 2000, Journal of hazardous materials.

[10]  David S.-K. Ting,et al.  The addition of hydrogen to a gasoline-fuelled SI engine , 2004 .

[11]  Mustafa Canakci,et al.  An experimental study of the effect of octane number higher than engine requirement on the engine performance and emissions , 2005 .

[12]  V. Makarevičienė,et al.  Influence of fuel oxygen content on diesel engine exhaust emissions , 2006 .

[13]  Adnan Sözen,et al.  Comparative study of mathematical and experimental analysis of spark ignition engine performance used ethanol–gasoline blend fuel , 2007 .

[14]  P. Dürre.  Biobutanol: An attractive biofuel , 2007, Biotechnology journal.

[15]  Nasib Qureshi,et al.  Butanol production from wheat straw hydrolysate using Clostridium beijerinckii , 2007, Bioprocess and biosystems engineering.

[16]  Daniel K. Carder,et al.  Cost of lower NOx emissions: Increased CO2 emissions from heavy-duty diesel engines , 2007 .

[17]  D. Richardson,et al.  Characteristics of Ethanol, Butanol, Iso-Octane and Gasoline Sprays and Combustion from a Multi-Hole Injector in a DISI Engine , 2008 .

[18]  T. Ezeji,et al.  Fermentation of dried distillers' grains and solubles (DDGS) hydrolysates to solvents and value-added products by solventogenic clostridia. , 2008, Bioresource technology.

[19]  Mustafa Canakci,et al.  Influence of injection timing on the exhaust emissions of a dual-fuel CI engine , 2008 .

[20]  Nasib Qureshi,et al.  Butanol production by Clostridium beijerinckii. Part I: use of acid and enzyme hydrolyzed corn fiber. , 2008, Bioresource technology.

[21]  N. Qureshi,et al.  Butanol production from wheat straw by simultaneous saccharification and fermentation using Clostridium beijerinckii: Part II—Fed-batch fermentation , 2008 .

[22]  C. Togbé,et al.  Oxidation kinetics of butanol–gasoline surrogate mixtures in a jet-stirred reactor: Experimental and modeling study , 2008 .

[23]  Tat Leung Chan,et al.  Effect of diesel/methanol compound combustion on diesel engine combustion and emissions , 2008 .

[24]  L. M. Das,et al.  Feasibility of blending karanja vegetable oil in petro-diesel and utilization in a direct injection diesel engine , 2009 .

[25]  Ayhan Demirbas,et al.  Political, economic and environmental impacts of biofuels: A review , 2009 .

[26]  John A. Williams,et al.  Impact of Butanol and Other Bio-Components on the Thermal Efficiency of Prototype and Conventional Engines , 2009 .

[27]  Z. Zhong,et al.  Dyno Test Investigations of Gasoline Engine Fueled with Butanol-Gasoline Blends , 2009 .

[28]  G. Nagarajan,et al.  Experimental investigation of timed manifold injection of acetylene in direct injection diesel engine in dual fuel mode , 2010 .

[29]  Nasib Qureshi,et al.  Production of butanol (a biofuel) from agricultural residues: Part I – Use of barley straw hydrolysate☆ , 2010 .

[30]  Stephen R. Hughes,et al.  Production of butanol (a biofuel) from agricultural residues: Part II – Use of corn stover and switchgrass hydrolysates☆ , 2010 .

[31]  Mustafa Canakci,et al.  The influence of operating parameters on the performance and emissions of a DI diesel engine using methanol-blended-diesel fuel , 2010 .

[32]  S. Szwaja,et al.  Combustion of n-butanol in a spark-ignition IC engine , 2010 .

[33]  C. D. Rakopoulos,et al.  Effects of butanol–diesel fuel blends on the performance and emissions of a high-speed DI diesel engine , 2010 .

[34]  F. Halter,et al.  Evaluation of Butanol–Gasoline Blends in a Port Fuel-injection, Spark-Ignition Engine , 2010 .

[35]  C. Lee,et al.  Emissions Characteristics of Neat Butanol Fuel Using a Port Fuel-Injected, Spark-Ignition Engine , 2011 .

[36]  Ni Zhang,et al.  Measurement of laminar flame speeds and flame stability analysis of tert-butanol–air mixtures at elevated pressures , 2011 .

[37]  M. Demirbas,et al.  Biowastes-to-biofuels , 2011 .

[38]  Jing Yang,et al.  The Performance Analysis of an Engine Fueled with Butanol-Gasoline Blend , 2011 .

[39]  T. Niass,et al.  Butanol Blending - a Promising Approach to Enhance the Thermodynamic Potential of Gasoline - Part 1 , 2011 .

[40]  Martin Pechout,et al.  Effect of Higher Content N-Butanol Blends on Combustion, Exhaust Emissions and Catalyst Performance of an Unmodified SI Vehicle Engine , 2012 .

[41]  Adrian Irimescu,et al.  Performance and fuel conversion efficiency of a spark ignition engine fueled with iso-butanol , 2012 .

[42]  Dimitrios C. Kyritsis,et al.  Fuel composition effect on the electrostatically-driven atomization of bio-butanol containing engine fuel blends , 2012 .

[43]  Gerardo Valentino,et al.  Optical diagnostics of the combustion process in a PFI SI boosted engine fueled with butanol–gasoline blend , 2012 .

[44]  Gholamhassan Najafi,et al.  Current biodiesel production technologies: A comparative review , 2012 .

[45]  C. Lee,et al.  Reduction in emissions of nitrogen oxides, particulate matter, and polycyclic aromatic hydrocarbon by adding water-containing butanol into a diesel-fueled engine generator , 2012 .

[46]  Zuo-hua Huang,et al.  Emission characteristics of a spark-ignition engine fuelled with gasoline-n-butanol blends in combination with EGR , 2012 .

[47]  T. Mahlia,et al.  Performance and emission analysis of hydrogen fueled compression ignition engine with variable water injection timing , 2012 .

[48]  Hongming Xu,et al.  Ignition timing sensitivities of oxygenated biofuels compared to gasoline in a direct-injection SI engine , 2012 .

[49]  F. Halter,et al.  Comparison of regulated and non-regulated pollutants with iso-octane/butanol and iso-octane/ethanol blends in a port-fuel injection Spark-Ignition engine , 2012 .

[50]  Xudong Zhen,et al.  Study of knock in a high compression ratio SI methanol engine using LES with detailed chemical kinetics , 2013 .

[51]  Fu Jianqin,et al.  Comparison and analysis of engine exhaust gas energy recovery potential through various bottom cycles , 2013 .

[52]  Zhen Huang,et al.  Experimental studies on the dual-fuel sequential combustion and emission simulation , 2013 .

[53]  D. Rakopoulos.  Combustion and emissions of cottonseed oil and its bio-diesel in blends with either n-butanol or diethyl ether in HSDI diesel engine , 2013 .

[54]  Nitesh Mittal,et al.  Study of performance and emission characteristics of a partially coated LHR SI engine blended with n-butanol and gasoline , 2013 .

[55]  Daming Zhang,et al.  Experimental study on SI engine fuelled with butanol–gasoline blend and H2O addition , 2013 .

[56]  A. Ramesh,et al.  Effective utilisation of butanol along with gasoline in a spark ignition engine through a dual injection system , 2013 .

[57]  P. Aleiferis,et al.  Characterisation of flame development with ethanol, butanol, iso-octane, gasoline and methane in a direct-injection spark-ignition engine , 2013 .

[58]  Guohui Zhu,et al.  A new approach for exhaust energy recovery of internal combustion engine: Steam turbocharging , 2013 .

[59]  Emilio Navarro,et al.  CO2 emissions from a spark ignition engine operating on natural gas–hydrogen blends (HCNG) , 2013 .

[60]  Yong Wang,et al.  Energy and exergy analysis on gasoline engine based on mapping characteristics experiment , 2013 .

[61]  Zhengqing Chen,et al.  Effects of port fuel injection (PFI) of n-butanol and EGR on combustion and emissions of a direct injection diesel engine , 2013 .

[62]  Ke Li,et al.  The challenges and strategies of butanol application in conventional engines: The sensitivity study of ignition and valve timing , 2013 .

[63]  Jingping Liu,et al.  The heat release analysis of bio-butanol/gasoline blends on a high speed SI (spark ignition) engine , 2013 .

[64]  L. De Simio,et al.  Combustion efficiency and engine out emissions of a S.I. engine fueled with alcohol/gasoline blends , 2013 .

[65]  Y. Chen,et al.  CO2 capture by membrane absorption coupling process: Application of ionic liquids , 2014 .

[66]  Zhengqing Chen,et al.  Combustion and emissions characteristics of high n-butanol/diesel ratio blend in a heavy-duty diesel engine and EGR impact , 2014 .

[67]  Ali Sürmen,et al.  Experimental investigation of the effect of E85 on engine performance and emissions under various ignition timings , 2014 .

[68]  A. Ramesh,et al.  Experimental studies on the effect of injection timing in a SI engine using dual injection of n-butanol and gasoline in the intake port , 2014 .