论文信息 - Study of Internal Magnetic Field Assisted Finishing for Copper Tubes with MRF (Magneto-Rheological Fluid)-Based Slurry

Study of Internal Magnetic Field Assisted Finishing for Copper Tubes with MRF (Magneto-Rheological Fluid)-Based Slurry

This research studied the internal magnetic field assisted finishing with MRF (Magneto-rheological Fluid)-based slurry for copper tubes.MRF-based slurry that included diamond abrasives was applied to the internal magnetic field assisted finishing for copper tubes and the finishing characteristics were studied. The results showed that the exciting current and the abrasive size changed the finishing characteristics of MRF-based slurry. This finishing process creates a smooth mirror finished surface with few directional cutting marks on the surface of the copper tube.

[1] Y. Uehara,et al. Study of nano-precision synergistic finishing process of ELID-grinding and MRF for silicon mirror(Nanoprecision Elid-grinding (continued)) , 2005 .

[2] Stephen D. Jacobs,et al. Precision optics fabrication using magnetorheological finishing , 1997, Optics + Photonics.

[3] S. Lee,et al. Surface polishing of three dimensional micro structures , 2004, 17th IEEE International Conference on Micro Electro Mechanical Systems. Maastricht MEMS 2004 Technical Digest.

[4] H. Yamaguchi,et al. Study of an internal magnetic abrasive finishing using a pole rotation system: Discussion of the characteristic abrasive behavior , 2000 .