Evaluation of a Simple Lamination Stacking Method for the Teeth of an Axial Flux Permanent-Magnet Synchronous Machine With Concentrated Stator Windings

In this paper, a simple lamination stacking method for the teeth of an axial flux permanent-magnet synchronous machine with concentrated stator windings is proposed. In this simple lamination stacking method, only two lamination profiles are used and are stacked alternately. To evaluate the performance of this stacking method, a comparison is made between the proposed method with two profiles and a conventional stacking method that uses different profiles for each lamination layer, using a multilayer 2-D finite element model.

[1]  Dong Ho Kim,et al.  Design and Parametric Analysis of Axial Flux PM Motors With Minimized Cogging Torque , 2009, IEEE Transactions on Magnetics.

[2]  V. Colli,et al.  Thermal Analysis of an Axial Flux Permanent-Magnet Synchronous Machine , 2009, IEEE Transactions on Magnetics.

[3]  Peter Sergeant,et al.  Optimized Design Considering the Mass Influence of an Axial Flux Permanent-Magnet Synchronous Generator With Concentrated Pole Windings , 2010, IEEE Transactions on Magnetics.

[4]  F. Crescimbini,et al.  Experimental study on reducing cogging torque and core power loss in axial-flux permanent-magnet machines with slotted winding , 2002, Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344).

[5]  P. Virtic,et al.  Torque Analysis of an Axial Flux Permanent Magnet Synchronous Machine by Using Analytical Magnetic Field Calculation , 2009, IEEE Transactions on Magnetics.

[6]  Chang-Chou Hwang,et al.  Optimization for Reduction of Torque Ripple in an Axial Flux Permanent Magnet Machine , 2009, IEEE Transactions on Magnetics.

[7]  L. Dupré,et al.  Comparison of Nonoriented and Grain-Oriented Material in an Axial Flux Permanent-Magnet Machine , 2010, IEEE Transactions on Magnetics.

[8]  Yee-Pien Yang,et al.  Optimal Design and Control of a Wheel Motor for Electric Passenger Cars , 2007 .

[9]  M.A. Valenzuela,et al.  Cogging Torque Reduction in an Axial Flux PM Machine via Stator Slot Displacement and Skewing , 2007, IEEE Transactions on Industry Applications.