Review of the membrane and bipolar plates materials for conventional and unitized regenerative fuel cells

Fuel cell or hydrogen systems offer the potential for clean, reliable and on-site energy generation. This article review current literature with the objective of identifying the latest development in membrane and bipolar plates for the conventional fuel cell and unitized regenerative fuel cell (URFC). The result shows that the choice of both the bipolar plates and the catalysts for URFC electrodes is a delicate task, for bipolar plate the corrosion in the oxygen side will be the major problem and for the electrodes a very good candidate for fuel cell mode will not function well in the electrolyser mode and therefore it is suggested that a compromise should be considered. It is recommended that aluminum, titanium or for best results titanium with a gold-coated layer is a suitable candidate as the bipolar plate and Pt/IrOX or Pt/Ru is suitable for an oxygen side catalyst in the URFC. For the conventional fuel cell the task is more easer because the corrosion problem is no more effective and thus the main goals for most of the studies was to concentrate on bipolar plate cost reduction, increase electrical conduction and reducing the platinum loading rate for catalyst.

[1]  Xiaoping Ma,et al.  Bifunctional oxygen electrode with corrosion-resistive gas diffusion layer for unitized regenerative fuel cell , 2006 .

[2]  James Larminie,et al.  Fuel Cell Systems Explained , 2000 .

[3]  Tae-Hee Lee,et al.  Performance of polypyrrole-impregnated composite electrode for unitized regenerative fuel cell , 2004 .

[4]  D. Gruber,et al.  Microfabricated polymer electrolyte membrane fuel cells with low catalyst loadings , 2005 .

[5]  Tsutomu Ioroi,et al.  IrO2-deposited Pt electrocatalysts for unitized regenerative polymer electrolyte fuel cells , 2001 .

[6]  Dae-Geun Nam,et al.  Thermal nitridation of chromium electroplated AISI316L stainless steel for polymer electrolyte membrane fuel cell bipolar plate , 2007 .

[7]  Viral S. Mehta,et al.  Review and analysis of PEM fuel cell design and manufacturing , 2003 .

[8]  André D. Taylor,et al.  Inkjet printing of carbon supported platinum 3-D catalyst layers for use in fuel cells , 2007 .

[9]  P. J. Sebastian,et al.  Synthesis, characterization and application of a Pd/Vulcan and Pd/C catalyst in a PEM fuel cell , 2004 .

[10]  Chi-Yuan Lee,et al.  The performance of miniature metallic PEM fuel cells , 2007 .

[11]  Edward Ghali,et al.  Corrosion behavior of two bipolar plate materials in simulated PEMFC environment by electrochemical noise technique , 2007 .

[12]  Chang-Soo Kim,et al.  Optimization of PtIr electrocatalyst for PEM URFC , 2005 .

[13]  John A. Turner,et al.  SnO2:F coated austenite stainless steels for PEM fuel cell bipolar plates , 2007 .

[14]  Guoying Chen,et al.  Combinatorial discovery of bifunctional oxygen reduction — water oxidation electrocatalysts for regenerative fuel cells , 2001 .

[15]  K. Yasuda,et al.  Thin film electrocatalyst layer for unitized regenerative polymer electrolyte fuel cells , 2002 .

[16]  Pan Mu,et al.  Sodium silicate/graphite conductive composite bipolar plates for proton exchange membrane fuel cells , 2006 .

[17]  Rudolf Holze,et al.  Bifunctional electrodes for an integrated water-electrolysis and hydrogen-oxygen fuel cell with a solid polymer electrolyte , 1992 .

[18]  Angelika Heinzel,et al.  Development of electrode/membrane units for the reversible solid polymer fuel cell (RSPFC) , 1995 .

[19]  Anthony B. LaConti,et al.  Proton-exchange membrane regenerative fuel cells , 1994 .

[20]  R. Hornung,et al.  Bipolar plate materials development using Fe-based alloys for solid polymer fuel cells , 1998 .

[21]  Hazem Tawfik,et al.  Testing and evaluation of aluminum coated bipolar plates of pem fuel cells operating at 70 °C , 2006 .

[22]  Wai-Bun Lui,et al.  Surface modification and development of titanium bipolar plates for PEM fuel cells , 2006 .

[23]  Yan Wang,et al.  An investigation into TiN-coated 316L stainless steel as a bipolar plate material for PEM fuel cells , 2007 .

[24]  H. Dhar,et al.  A unitized approach to regenerative solid polymer electrolyte fuel cells , 1993 .

[25]  Rakesh B. Mathur,et al.  Fabrication of high strength and a low weight composite bipolar plate for fuel cell applications , 2007 .

[26]  Peter C. Rieke,et al.  Fabrication of polymer electrolyte membrane fuel cell MEAs utilizing inkjet print technology , 2007 .

[27]  Jai Prakash,et al.  Investigations of ruthenium pyrochlores as bifunctional oxygen electrodes , 1999 .

[28]  S. Sivaram,et al.  High-temperature, polymer-graphite hybrid composites for bipolar plates: Effect of processing conditions on electrical properties , 2007 .

[29]  R. Mallant,et al.  Use of stainless steel for cost competitive bipolar plates in the SPFC , 2000 .

[30]  John Turner,et al.  SnO2:F coated ferritic stainless steels for PEM fuel cell bipolar plates , 2007 .

[31]  Chang-Soo Kim,et al.  Optimization of bifunctional electrocatalyst for PEM unitized regenerative fuel cell , 2004 .

[32]  Zongqiang Mao,et al.  Deposited RuO2–IrO2/Pt electrocatalyst for the regenerative fuel cell , 2007 .

[33]  Gregor Hoogers,et al.  Fuel Cell Technology Handbook , 2002 .

[34]  J. Wind,et al.  Metallic bipolar plates for PEM fuel cells , 2002 .

[35]  D. Hodgson,et al.  New lightweight bipolar plate system for polymer electrolyte membrane fuel cells , 2001 .

[36]  Tsutomu Ioroi,et al.  Influence of PTFE coating on gas diffusion backing for unitized regenerative polymer electrolyte fuel cells , 2003 .

[37]  D. Gruber,et al.  Sputter-deposited ultra-low catalyst loadings for PEM fuel cells , 2005 .

[38]  Eric Fleury,et al.  Development of metallic glasses for bipolar plate application , 2007 .

[39]  Yan Ming Wang,et al.  Study on the electrical and mechanical properties of phenol formaldehyde resin/graphite composite for bipolar plate , 2007 .

[40]  Ramana G. Reddy,et al.  Materials and design development for bipolar/end plates in fuel cells , 2004 .

[41]  Dhanapati Deka,et al.  Differences in physico-mechanical behaviors of resol(e) and novolac type phenolic resin based composite bipolar plate for proton exchange membrane (PEM) fuel cell , 2007 .

[42]  Yoshiyuki Show,et al.  Electrically conductive amorphous carbon coating on metal bipolar plates for PEFC , 2007 .

[43]  Jaafar Sahari,et al.  Electrical properties of carbon-based polypropylene composites for bipolar plates in polymer electrolyte membrane fuel cell (PEMFC) , 2007 .

[44]  P. Adcock,et al.  Stainless steel as a bipolar plate material for solid polymer fuel cells , 2000 .

[45]  Wai-Bun Lui,et al.  Performance of the gold-plated titanium bipolar plates for the light weight PEM fuel cells , 2006 .

[46]  David Harrison,et al.  A review of the latest developments in electrodes for unitised regenerative polymer electrolyte fuel cells , 2006 .

[47]  J. Scholta,et al.  Investigations on novel low-cost graphite composite bipolar plates , 1999 .

[48]  Ursula Wittstadt,et al.  Membrane electrode assemblies for unitised regenerative polymer electrolyte fuel cells , 2005 .

[49]  Yan Wang,et al.  An investigation of the electrochemical properties of PVD TiN-coated SS410 in simulated PEM fuel cell environments , 2007 .

[50]  B. Yi,et al.  Bifunctional electrodes with a thin catalyst layer for `unitized' proton exchange membrane regenerative fuel cell , 1999 .

[51]  Wenli Yao,et al.  Chemical deposition of platinum nanoparticles on iridium oxide for oxygen electrode of unitized regenerative fuel cell , 2007 .

[52]  Yilun Ren,et al.  Corrosion protection of 304 stainless steel bipolar plates using TiC films produced by high-energy micro-arc alloying process , 2007 .