Fatigue life evaluation of wire bonds in LED packages using numerical analysis

Abstract Reliability of LED packages is evaluated using several tests. When a thermal shock test, which is one of the reliability tests, is conducted, the most common failure mode is wire neck breakage. In order to evaluate the wire bonding reliability of LED packages, performing the thermal shock test is time-consuming. In this paper the wire bonding reliability for LED packages is evaluated by using numerical analysis. A wire bonding lifetime model for the thermal shock test was developed, which is based on Coffin-Manson fatigue law. The model was calibrated from fatigue data of thermal shock tests and volume averaging accumulated plastic strains. The accumulated plastic strains were calculated by using finite element analysis corresponding to the test conditions. The test conditions were changed by silicones, package sizes, wire bonding diameters, heights, and lengths. The calibrated model was used to estimate the number cycle to failure so that the wire bonding reliability for the thermal shock test was evaluated by performing the numerical analysis. Furthermore, we used a response surface methodology to study the relationship between the wire loop and the accumulated plastic strain to determine the optimal wire loop. The plastic strain was a function of diameter, height and length. At the optimal point, the number of cycle to failure for the thermal shock test was suggested using the wire bonding lifetime model.

[1]  F. Theunis,et al.  Prediction of high cycle fatigue in aluminum bond wires: A physics of failure approach combining experiments and multi-physics simulations , 2006, EuroSime 2006 - 7th International Conference on Thermal, Mechanical and Multiphysics Simulation and Experiments in Micro-Electronics and Micro-Systems.

[2]  Wolfgang Fichtner,et al.  Lifetime prediction of IGBT modules for traction applications , 2000, 2000 IEEE International Reliability Physics Symposium Proceedings. 38th Annual (Cat. No.00CH37059).

[3]  Michael Pecht,et al.  Failure Mechanisms and Reliability Issues in LEDs , 2013 .

[4]  T. Matsunaga,et al.  Thermal Fatigue Life Evaluation of Aluminum Wire Bonds , 2006, 2006 1st Electronic Systemintegration Technology Conference.

[5]  M. Petzold,et al.  Mechanical fatigue properties of heavy aluminium wire bonds for power applications , 2008, 2008 2nd Electronics System-Integration Technology Conference.

[6]  Robert D. Lorenz,et al.  Analysis and In-Situ Measurement of Thermal-Mechanical Strain in Active Silicon Power Semiconductors , 2008, 2008 IEEE Industry Applications Society Annual Meeting.

[7]  R. Zehringer,et al.  Comparison between finite-element and analytical calculations for the lifetime estimation of bond wires in IGBT modules , 2000, 12th International Symposium on Power Semiconductor Devices & ICs. Proceedings (Cat. No.00CH37094).