Study of the interfacial properties of natural fibre reinforced polyethylene

Abstract In the present paper, the interfacial properties of extruded and compression moulded natural fibre reinforced thermoplastics (NFRTP) are studied. The interfacial shear strength of PE-sisal composites was measured using the single fibre fragmentation test (SFFT). The difficulties in obtaining significant measurements are discussed and assessed. The main problems found were the non-transparent nature of the matrix, the irregular shape of the fibres, and the variability in fibre–matrix adhesion encountered even in single fibre specimens. Scanning Electron Microscope (SEM) pictures obtained from fractured surfaces were used for a qualitative evaluation of the interfacial properties of NFRTPs. Fibre treatment with stearic acid increased the interfacial shear strength by 23% with respect to untreated fibres. The improvements in interfacial shear strength found for the treated specimens were consistent with observations from SEM fractographs.

[1]  Lawrence T. Drzal,et al.  Comparison of methods for the measurement of fibre/matrix adhesion in composites , 1992 .

[2]  D A Mendels.  Analysis of the single-fibre fragmentation test. , 2001 .

[3]  Sabu Thomas,et al.  A review on interface modification and characterization of natural fiber reinforced plastic composites , 2001 .

[4]  B. Ochoa,et al.  Single Screw Extrusion of Natural Fibre Reinforced Thermoplastics (NFRTP) , 2003 .

[5]  S. Phoenix,et al.  Interfacial Shear Strength Studies Using the Single-Filament-Composite Test. I: Experiments on Graphite Fibers in Epoxy , 1989 .

[6]  M. Aguirre,et al.  Rotational Moulding and Powder Processing of Natural Fibre Reinforced Thermoplastics , 2003 .

[7]  S. Amico,et al.  Pull-out and other evaluations in sisal-reinforced polyester biocomposites , 2003 .

[8]  J. Jog,et al.  Natural fiber polymer composites: A review , 1999 .

[9]  A. Błędzki,et al.  The influence of fiber-surface treatment on the mechanical properties of jute-polypropylene composites , 1997 .

[10]  A. Błędzki,et al.  Composites reinforced with cellulose based fibres , 1999 .

[11]  F. G. Torres,et al.  Morphological Characterisation of Natural Fibre Reinforced Thermoplastics (NFRTP) Processed by Extrusion, Compression and Rotational Moulding , 2004 .

[12]  M. Lodeiro.  Single-Fibre Fragmentation Test for the Characterisation of Interfacial Phenomena in PMCs , 2001 .

[13]  M. Misra,et al.  Biofibres, biodegradable polymers and biocomposites: An overview , 2000 .

[14]  C. Grande,et al.  Investigation of Fiber Organization and Damage During Single Screw Extrusion of Natural Fiber Reinforced Thermoplastics , 2005 .

[15]  M. Lodeiro.  Investigation of PMC interface properties using the single-fibre fragmentation technique. , 2001 .

[16]  Yu. A. Gorbatkina.  Adhesive strength in fibre-polymer systems , 1992 .

[17]  Andrzej K. Bledzki,et al.  Possibilities to Improve the Properties of Natural Fiber Reinforced Plastics by Fiber Modification – Jute Polypropylene Composites – , 2000 .