Power management approach for hybrid multi-input/multi-output converter

Power management scheme for a converter system with multiple inputs and outputs is presented in the paper. The hybrid control approach was applied due to the required operation in various regimes. System collects the energy from multiple sources. The operation is supported by the battery.

[1]  G. Joos,et al.  Integrating renewable energy sources and storage into isolated diesel generator supplied electric power systems , 2008, 2008 13th International Power Electronics and Motion Control Conference.

[2]  Zhenhua Jiang.  Power management of hybrid photovoltaic - fuel cell power systems , 2006, 2006 IEEE Power Engineering Society General Meeting.

[3]  A. Molderink,et al.  Algorithms for Balancing Demand-Side Load and Micro-Generation in Islanded Operation , 2008, 2008 19th International Conference on Systems Engineering.

[4]  M. Velez-Reyes,et al.  Hierarchical control of Hybrid Power Systems , 2008, 2008 11th IEEE International Power Electronics Congress.

[5]  L. Solero,et al.  Design of multiple-input power converter for hybrid vehicles , 2004, IEEE Transactions on Power Electronics.

[6]  G. Spiazzi,et al.  Energy Management Fuzzy Logic Supervisory for Electric Vehicle Power Supplies System , 2008, IEEE Transactions on Power Electronics.

[7]  M.A. Golkar,et al.  Control of hybrid fuel cell/battery distributed power generation system with voltage sag ride-through capability , 2008, 2008 IEEE 2nd International Power and Energy Conference.

[8]  Chaitali Chakrabarti,et al.  Dynamic Power Management with Hybrid Power Sources , 2007, 2007 44th ACM/IEEE Design Automation Conference.

[9]  C.V. Nayar,et al.  A Control Approach and Design Consideration of PV/Diesel Hybrid Distributed Generation System Using Dual Voltage Source Inverter for Weak Grid , 2006, 2006 SICE-ICASE International Joint Conference.

[10]  Pierluigi Pisu,et al.  A Comparative Study Of Supervisory Control Strategies for Hybrid Electric Vehicles , 2007, IEEE Transactions on Control Systems Technology.