Reconfiguration and tool path planning of hexapod machine tools

[1]  Tsuneo Yoshikawa,et al.  Manipulability of Robotic Mechanisms , 1985 .

[2]  E F Fichter,et al.  A Stewart Platform- Based Manipulator: General Theory and Practical Construction , 1986 .

[3]  Vincenzo Parenti-Castelli,et al.  Determination of the Actual Configuration of the General Stewart Platform Using Only One Additional Sensor , 1999 .

[4]  Zvi S. Roth,et al.  Fundamentals of Manipulator Calibration , 1991 .

[5]  Christiaan J. J. Paredis,et al.  A rapidly deployable manipulator system , 1996, Proceedings of IEEE International Conference on Robotics and Automation.

[6]  Takafumi Matsumaru,et al.  Design and control of the modular robot system: TOMMS , 1995, Proceedings of 1995 IEEE International Conference on Robotics and Automation.

[7]  R. Cohen,et al.  Conceptual Design of a Modular Robot , 1992 .

[8]  Yoram Koren,et al.  Efficient Tool-Path Planning for Machining Free-Form Surfaces , 1996 .

[9]  V. De Sapio.  Some approaches for modeling and analysis of a parallel mechanism with stewart platform architecture , 1998 .

[10]  Jean-Pierre Merlet.  Singular Configurations of Parallel Manipulators and Grassmann Geometry , 1989, Int. J. Robotics Res..

[11]  Yoshihiko Nakamura,et al.  Advanced robotics - redundancy and optimization , 1990 .

[12]  Ka C. Cheok,et al.  Exact methods for determining the kinematics of a stewart platform using additional displacement sensors , 1993, J. Field Robotics.

[13]  Tian Huang,et al.  The Local Dexterity, Optimal Architecture and Design Criteria of Parallel Machine Tools , 1998 .

[14]  Carlo Innocenti,et al.  Direct position analysis of the Stewart platform mechanism , 1990 .

[15]  T. Moriwaki.  Survey of R&D Activities Related to Parallel Mechanisms in Japan , 1999 .

[16]  M. C. Leu,et al.  Design, Reconfiguration, and Control of Parallel Kinematic Machines , 1999 .

[17]  John J. Craig,et al.  Articulated hands: Force control and kinematic issues , 1981 .

[18]  D. Stewart.  A Platform with Six Degrees of Freedom , 1965 .

[19]  Jean-Pierre Merlet,et al.  Parallel manipulators: state of the art and perspectives , 1992, Adv. Robotics.

[20]  Yoram Koren,et al.  Control of Machine Tools , 1997 .

[21]  Zhiming Ji,et al.  Design of a reconfigurable platform manipulator , 1998, J. Field Robotics.

[22]  B. Roth,et al.  Solving Polynomial Systems for the Kinematic Analysis and Synthesis of Mechanisms and Robot Manipulators , 1995 .

[23]  Jean-Pierre Merlet.  Closed-form resolution of the direct kinematics of parallel manipulators using extra sensors data , 1993, [1993] Proceedings IEEE International Conference on Robotics and Automation.

[24]  Hanqi Zhuang,et al.  Method for kinematic calibration of stewart platforms , 1993, J. Field Robotics.

[25]  Fariborz Behi.  Kinematic analysis for a six-degree-of-freedom 3-PRPS parallel mechanism , 1988, IEEE J. Robotics Autom..

[26]  Takeo Kanade,et al.  The CMU reconfigurable modular manipulator system , 1988 .

[27]  Y.-S. Le,et al.  Machined surface error analysis for 5-axis machining , 1996 .

[28]  C. Gosselin,et al.  The optimum kinematic design of a spherical three-degree-of-freedom parallel manipulator , 1988 .

[29]  Yuan-Shin Lee,et al.  Non-isoparametric tool path planning by machining strip evaluation for 5-axis sculptured surface machining , 1998, Comput. Aided Des..

[30]  Robert B. Jerard,et al.  5-axis Machining of Sculptured Surfaces with a Flat-end Cutter , 1994, Comput. Aided Des..

[31]  S. Sarma,et al.  On the Use and Augmentation of Hexapod Machine Tools , 1999 .

[32]  Zhiming Ji.  Workspace analysis of stewart platforms via vertex space , 1994, J. Field Robotics.