Optimal placement and sizing of distributed generations using shuffled bat algorithm with future load enhancement

Summary In this paper, a new and efficient hybrid optimization algorithm is proposed for optimal placement and sizing of the distributed generations (DGs). Bus voltage profile improvement, line flow capacity, and active and reactive power loss minimization are considered as multi-objectives to optimize under-distribution load enhancement. The addition of multi-DGs to the distribution system, which is already having DGs, is studied under increased load demand. Renewable energy resources such as wind, solar, fuel cell, and micro turbines are considered in power system modeling for finding the optimal placement and sizing. Current injection-based distribution load is considered in DGs modeling in power systems. Active and reactive losses and voltage profiles are studied for all combinations of DGs. To optimize the objective function, a new optimization technique called shuffled bat algorithm is proposed. The proposed methodology is tested on 38-bus and 69-bus radial distribution systems with 100% and 120% of base load conditions to demonstrate its performance and effectiveness. Results show that the planned methodology is superior to existing strategies in terms of multi-objectives considered. Copyright © 2015 John Wiley & Sons, Ltd.

[1]  Felix F. Wu,et al.  Network reconfiguration in distribution systems for loss reduction and load balancing , 1989 .

[2]  Mehdi Ehsan,et al.  Efficient immune-GA method for DNOs in sizing and placement of distributed generation units , 2011 .

[3]  Yoshikazu Fukuyama,et al.  Practical equipment models for fast distribution power flow considering interconnection of distributed generators , 2001, 2001 Power Engineering Society Summer Meeting. Conference Proceedings (Cat. No.01CH37262).

[4]  Amany El-Zonkoly,et al.  Optimal placement of multi-distributed generation units including different load models using particle swarm optimisation , 2011 .

[5]  M. M. Aman,et al.  Optimal placement and sizing of a DG based on a new power stability index and line losses , 2012 .

[6]  M. M. Aman,et al.  A new approach for optimum DG placement and sizing based on voltage stability maximization and minimization of power losses , 2013 .

[7]  Kyung Bin Song,et al.  Multiobjective distributed generation placement using fuzzy goal programming with genetic algorithm , 2008 .

[8]  Ishak Aris,et al.  A Review of Strategies for Optimal Placement of Distributed Generation in Power Distribution Systems , 2010 .

[9]  M. M. Aman,et al.  Optimum Simultaneous DG and Capacitor Placement on the Basis of Minimization of Power Losses , 2013 .

[10]  Magdy M. A. Salama,et al.  Distributed generation technologies, definitions and benefits , 2004 .

[11]  Chandrasekhar Yammani,et al.  Optimal placement and sizing of the DER in distribution systems using Shuffled Frog Leap Algorithm , 2011, 2011 IEEE Recent Advances in Intelligent Computational Systems.

[12]  D. Singh,et al.  Multiobjective Optimization for DG Planning With Load Models , 2009, IEEE Transactions on Power Systems.

[13]  M. M. Aman,et al.  A new approach for optimum simultaneous multi-DG distributed generation Units placement and sizing based on maximization of system loadability using HPSO (hybrid particle swarm optimization) algorithm , 2014 .

[14]  Dheeraj Kumar Khatod,et al.  Optimal planning of distributed generation systems in distribution system: A review , 2012 .

[15]  Jen-Hao Teng,et al.  Modelling distributed generations in three-phase distribution load flow , 2008 .

[16]  Caisheng Wang,et al.  Analytical approaches for optimal placement of distributed generation sources in power systems , 2004 .

[17]  N. Martins,et al.  Three-phase power flow calculations using the current injection method , 2000 .

[18]  Mahmoud-Reza Haghifam,et al.  Simultaneous placement of distributed generation and capacitors in distribution networks considering voltage stability index , 2013 .

[19]  Faruk Ugranli,et al.  Multiple-distributed generation planning under load uncertainty and different penetration levels , 2013 .

[20]  Suneet Singh,et al.  Optimal Sizing of Distributed Generation Placed on Radial Distribution Systems , 2010 .

[21]  Graham Ault,et al.  Multi-objective planning of distributed energy resources: A review of the state-of-the-art , 2010 .