Revolutionary additive manufacturing : an overview

[1]  Neil Hopkinson,et al.  Rapid manufacturing : an industrial revolution for the digital age , 2006 .

[2]  Sara McMains.  Layered manufacturing technologies , 2005, CACM.

[3]  Pulak M. Pandey,et al.  Improving accuracy through shrinkage modelling by using Taguchi method in selective laser sintering , 2007 .

[4]  M. Greulich.  Rapid Prototyping and Fabrication of Tools and Metal Parts by Laser Sintering of Metal Powders , 1997 .

[5]  A. K. Sood,et al.  Improving dimensional accuracy of Fused Deposition Modelling processed part using grey Taguchi method , 2009 .

[6]  Takeo Nakagawa,et al.  Recent Developments in Auto Body Panel Forming Technology , 1993 .

[7]  Ming-Chuan Leu,et al.  Progress in Additive Manufacturing and Rapid Prototyping , 1998 .

[8]  R. Hague *,et al.  Material and design considerations for rapid manufacturing , 2004 .

[9]  E. Brandl,et al.  Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM): Microstructure, high cycle fatigue, and fracture behavior , 2012 .

[10]  Ingomar Kelbassa,et al.  Laser Additive Manufacturing , 2010 .

[11]  J. Mei,et al.  Microstructure study of direct laser fabricated Ti alloys using powder and wire , 2006 .

[12]  Feng Lin,et al.  Rapid prototyping and manufacturing technology: Principle, representative technics, applications, and development trends , 2009 .

[13]  I. Tsai,et al.  Rapid prototyping technique for ceramic mini-devices containing internal channels with asymmetrical contour , 2010 .

[14]  Xin Lin,et al.  Heat-treated microstructure and mechanical properties of laser solid forming Ti-6Al-4V alloy , 2009 .

[15]  Frank W. Liou,et al.  Laser metal forming processes for rapid prototyping - A review , 2000 .

[16]  K. Osakada,et al.  Rapid Manufacturing of Metal Components by Laser Forming , 2006 .

[17]  Bin Huang,et al.  Development of a software procedure for Curved Layered Fused Deposition Modelling (CLFDM) , 2009 .

[18]  Michael J. Cima,et al.  Three Dimensional Printing: Rapid Tooling and Prototypes Directly from a CAD Model , 1992 .

[19]  Cyrus Aghanajafi,et al.  Description and Modeling of the Additive Manufacturing Technology for Aerodynamic Coefficients Measurement , 2012 .

[20]  Pal Molian,et al.  Functionally graded mold inserts by laser-based flexible fabrication: processing modeling, structural analysis, and performance evaluation , 2005 .

[21]  Weidong Huang,et al.  Influence of laser deposition patterns on part distortion, interior quality and mechanical properties by laser solid forming (LSF) , 2011 .

[22]  K. Osakada,et al.  Flexible manufacturing of metallic products by selective laser melting of powder , 2006 .

[23]  O. S. Es-Said,et al.  The Effect of Layer Orientation on the Mechanical Properties and Microstructure of a Polymer , 2011 .

[24]  J. Colton,et al.  Properties of rapid prototype injection mold tooling materials , 2003 .

[25]  J. Mazumder,et al.  Direct materials deposition: designed macro and microstructure , 1998 .

[26]  Igor Drstvenšek,et al.  Speed and accuracy evaluation of additive manufacturing machines , 2011 .

[27]  Richard Plourde.  Laser-Based Repair System Reclaims High Value Military Components , 2004 .

[28]  Jean-Pierre Kruth,et al.  Material incress manufacturing by rapid prototyping techniques , 1991 .

[29]  Soumya Banerjee.  Development of a novel toner for electrophotography based additive manufacturing process. , 2011 .

[30]  Amir Khajepour,et al.  Control of the Clad Height in Laser Powder Deposition Process Using a PID Controller , 2006 .

[31]  Li-kai Shi,et al.  Microstructure and formation mechanism of titanium matrix composites coating on Ti-6Al-4V by laser cladding , 2007 .

[32]  Abhay S Pandit,et al.  Porous titanium scaffolds fabricated using a rapid prototyping and powder metallurgy technique. , 2008, Biomaterials.

[33]  Allan Rennie,et al.  A BASIC DESIGN-BUILD-TEST EXPERIENCE: MODEL WIND TURBINE USING ADDITIVE MANUFACTURE , 2011 .

[34]  Yinong Liu,et al.  Functionally graded NiTi strips prepared by laser surface anneal , 2012 .

[35]  G. Landers Robert.  Process Control of Laser Metal Deposition Manufacturing - A Simulation Study , 2003 .

[36]  Bahattin Koc,et al.  Non-uniform offsetting and hollowing objects by using biarcs fitting for rapid prototyping processes , 2002, Comput. Ind..

[37]  M. Shellabear,et al.  E-manufacturing with laser-sintering - to series production and beyond , 2004 .

[38]  L. Froyen,et al.  Binding Mechanisms in Selective Laser Sintering and Selective Laser Melting , 2004 .

[39]  Xue Yan,et al.  PII: 0010-4485(95)00035-6 , 2003 .