Entropy generation analysis for the design improvement of a latent heat storage system

The aim of this work is to investigate design improvements of a shell-and-tube latent heat thermal energy storage unit using an approach based on the analysis of entropy generation. The study is conducted by means of a computational fluid-dynamic (CFD) model which takes into account phase change phenomenon by means of the enthalpy method. Thermal-fluid dynamic problem is solved both for the phase change material (PCM) and heat transfer fluid (HTF). The different contributions to the local entropy generation rate are computed and presented for both un-finned and finned systems. Fin arrangement is then modified according with the analysis of entropy generation distribution in order to increase the efficiency of the system. The results show that the improved system allows to reduce PCM solidification time and increase Second-law efficiency.

[1]  Luisa F. Cabeza,et al.  Heat transfer enhancement in water when used as PCM in thermal energy storage , 2002 .

[2]  K. Ismail,et al.  Fins and turbulence promoters for heat transfer enhancement in latent heat storage systems , 2011 .

[3]  Aytunç Erek,et al.  Experimental and numerical investigation of thermal energy storage with a finned tube , 2005 .

[4]  Tarik Kousksou,et al.  Second law analysis of latent thermal storage for solar system , 2007 .

[5]  Nobuhiro Maruoka,et al.  Thermal and flow behaviors in heat transportation container using phase change material , 2008 .

[6]  P. Mazur,et al.  Non-equilibrium thermodynamics, , 1963 .

[7]  K. Ismail,et al.  Numerical and experimental study on the solidification of PCM around a vertical axially finned isothermal cylinder , 2001 .

[8]  S. D. Kim,et al.  Heat-transfer characteristics of a latent heat storage system using MgCl2 · 6H2O , 1992 .

[9]  C. F. Curtiss,et al.  Molecular Theory Of Gases And Liquids , 1954 .

[10]  Neil Hewitt,et al.  The development of a finned phase change material (PCM) storage system to take advantage of off-peak electricity tariff for improvement in cost of heat pump operation , 2010 .

[11]  V. Voller,et al.  A fixed grid numerical modelling methodology for convection-diffusion mushy region phase-change problems , 1987 .

[12]  Adriano Sciacovelli,et al.  Entropy generation analysis in a monolithic-type solid oxide fuel cell (SOFC) , 2009 .

[13]  Ibrahim Dincer,et al.  Numerical simulation and exergetic performance assessment of charging process in encapsulated ice thermal energy storage system , 2012 .

[14]  Adriano Sciacovelli,et al.  Numerical Model for Storage Systems Based on Phase-Change Materials , 2011 .

[15]  Baoling Huang,et al.  Optimization of filler distribution for organic phase change material composites: Numerical investigation and entropy analysis , 2014 .

[16]  A. Bejan.  Two Thermodynamic Optima in the Design of Sensible Heat Units for Energy Storage , 1978 .

[17]  Francis Agyenim,et al.  A review of materials, heat transfer and phase change problem formulation for latent heat thermal energy storage systems (LHTESS) , 2010 .

[18]  S. D. Pohekar,et al.  Exergy analysis of particle dispersed latent heat thermal storage system for solar water heaters , 2010 .

[19]  Amir Faghri,et al.  Exergy analysis of latent heat thermal energy storage for solar power generation accounting for constraints imposed by long-term operation and the solar day , 2013 .

[20]  A. Elgafy,et al.  Numerical Study for Enhancing the Thermal Conductivity of Phase Change Material (PCM) Storage using High Thermal Conductivity Porous Matrix , 2005 .

[21]  Ibrahim Dincer,et al.  Energy and exergy analyses of an ice-on-coil thermal energy storage system , 2011 .

[22]  Zhen-Xiang Gong,et al.  Entropy Generation Minimization , 1996 .

[23]  Luisa F. Cabeza,et al.  Review on thermal energy storage with phase change: materials, heat transfer analysis and applications , 2003 .

[24]  M. Lacroix.  Study of the heat transfer behavior of a latent heat thermal energy storage unit with a finned tube , 1993 .

[25]  Ibrahim Dincer,et al.  An approach to entropy analysis of a latent heat storage module , 2008 .

[26]  Tarik Kousksou,et al.  Exergy based performance evaluation of latent heat thermal storage system: A review , 2010 .

[27]  A. Sari,et al.  Microencapsulated n-octacosane as phase change material for thermal energy storage , 2009 .

[28]  Viktoria Martin,et al.  Submerged finned heat exchanger latent heat storage design and its experimental verification , 2012 .