Energy consumption reduction technology in manufacturing — A selective review of policies, standards, and research

[1]  Gustav R. Grob.  Future Transportation with Smart Grids and Sustainable Energy , 2009 .

[2]  Paul de Boer,et al.  Generalized Fisher index or Siegel–Shapley decomposition? , 2009 .

[3]  Nirmal-Kumar C. Nair,et al.  SmartGrid: Future networks for New Zealand power systems incorporating distributed generation , 2009 .

[4]  K. Papagiannaki,et al.  Decomposition analysis of CO2 emissions from passenger cars: The cases of Greece and Denmark , 2009 .

[5]  J. Lilliestam,et al.  Development of SuperSmart Grids for a more efficient utilisation of electricity from renewable sources , 2009 .

[6]  Yang-Tse Cheng,et al.  The effect of free-machining elements on dry machining of B319 aluminum alloy , 2009 .

[7]  Eberhard Bamberg,et al.  Slicing, cleaning and kerf analysis of germanium wafers machined by wire electrical discharge machining , 2009 .

[8]  C. Weber.  Measuring structural change and energy use: Decomposition of the US economy from 1997 to 2002 , 2009 .

[9]  Gustav R. Grob,et al.  Future transportation with smart grids & sustainable energy , 2009, 2009 6th International Multi-Conference on Systems, Signals and Devices.

[10]  Clinton J. Andrews,et al.  Technology diffusion and energy intensity in US commercial buildings , 2009 .

[11]  Samir Mekid,et al.  Energy harvesting for wireless sensor nodes: investigation of architectures and sources of energy , 2009, Int. J. Comput. Aided Eng. Technol..

[12]  Hirohisa Narita,et al.  Analysis of Environmental Impact due to Machine Tool Operation , 2009, Int. J. Autom. Technol..

[13]  Takuji Kobayashi.  Progress of NTN's Bearing Technology in the Past Quarter Century and Its Future Perspective , 2009 .

[14]  K. Hayashida.  Technical Trend of Steering System and Grinding Machine , 2009 .

[15]  K. Miyaguchi,et al.  Technical Development of Precision Bearing and Ball Screw , 2009 .

[16]  I. Aoki.  Precision Fine Blanking , 2009 .

[17]  Christoph Herrmann,et al.  Process chain simulation to foster energy efficiency in manufacturing , 2009 .

[18]  S. Motonishi.  Progress of PVD Coated Tools , 2009 .

[19]  Toru Sekiguchi.  Trend and Next Development of Cutting Tool for Eco-machining , 2009 .

[20]  Athanasios V. Vasilakos,et al.  A secure network management protocol for SmartGrid BPL networks: Design, implementation and experimental results , 2008, Comput. Commun..

[21]  Marek Balazinski,et al.  Diffusion wear mechanism during high-speed machining of 7475-T7351 aluminum alloy with carbide end mills , 2008 .

[22]  David P. Chassin,et al.  Decentralized Coordination through Digital Technology, Dynamic Pricing, and Customer-Driven Control: The GridWise Testbed Demonstration Project , 2008 .

[23]  Bernd-Arno Behrens,et al.  Warm forging: new forming sequence for the manufacturing of long flat pieces , 2008, Prod. Eng..

[24]  Akshay Kumar Saha,et al.  MICROTURBINE BASED DISTRIBUTED GENERATOR IN SMART GRID APPLICATION , 2009 .

[25]  Stefan Salhofer,et al.  A review of ecodesign and environmental assessment tools and their appropriateness for electrical and electronic equipment , 2008 .

[26]  Richard E. Brown,et al.  Savings estimates for the United States Environmental Protection Agency's ENERGY STAR voluntary product labeling program , 2008 .

[27]  Aeo,et al.  Annual Energy Outlook 2008: With Projections to 2030 , 2008 .

[28]  E. Worrell,et al.  Energy Efficiency Improvement and Cost Saving Opportunities for Cement Making. An ENERGY STAR Guide for Energy and Plant Managers , 2008 .

[29]  F. Lescaroux,et al.  Decomposition of US manufacturing energy intensity and elasticities of components with respect to energy prices , 2008 .

[30]  Norio Minami.  Japan's Energy Conservation Initiatives: Highlighting the Energy Conservation Policy , 2008 .

[31]  Grigoris K. Papagiannis,et al.  Economic and environmental impacts from the implementation of an intelligent demand side management system at the European level , 2008 .

[32]  J. Jung,et al.  Real-time gap control for micro-EDM: Application in a microfactory , 2008 .

[33]  J. Jung,et al.  Real-time Gap Control for Micro-EDM , 2008 .

[34]  John W. Sutherland,et al.  A comparison of manufacturing and remanufacturing energy intensities with application to diesel engine production , 2008 .

[35]  K. Masui,et al.  A Study on Efficiency Analysis of Micro Manufacturing Systems , 2007, 2007 International Conference on Mechatronics and Automation.

[36]  伊藤 庄一,et al.  Japan's energy strategy and development of energy cooperation in the Asia-Pacific (特集 エネルギー安全保障と多国間協力) , 2007 .

[37]  Danae Diakoulaki,et al.  Decomposition analysis for assessing the progress in decoupling industrial growth from CO2 emissions in the EU manufacturing sector , 2007 .

[38]  Fridtjof Unander.  Decomposition of manufacturing energy-use in IEA countries: How do recent developments compare with historical long-term trends? , 2007 .

[39]  Debora Coll-Mayor,et al.  Future intelligent power grids: Analysis of the vision in the European Union and the United States , 2007 .

[40]  B. W. Ang,et al.  Energy decomposition analysis: IEA model versus other methods , 2007 .

[41]  Directorate Energy.  Energy research in the 7th framework programme , 2007 .

[42]  B. W. Ang,et al.  Handling zero values in the logarithmic mean Divisia index decomposition approach , 2007 .

[43]  P. W. Marksberry,et al.  Micro-flood (MF) technology for sustainable manufacturing operations that are coolant less and occupationally friendly , 2007 .

[44]  John W. Sutherland,et al.  Comparing Energy and Other Measures of Environmental Performance in the Original Manufacturing and Remanufacturing of Engine Components , 2007 .

[45]  Aie,et al.  Tracking Industrial Energy Efficiency and CO2 Emissions , 2007 .

[46]  Tadj Oreszczyn,et al.  How to support growth with less energy , 2008 .

[47]  Y. Shin,et al.  Laser-assisted machining of Inconel 718 with an economic analysis , 2006 .

[48]  Manfred Lenzen,et al.  Decomposition analysis and the mean-rate-of-change index , 2006 .

[49]  S. Veldhuis,et al.  Tribological adaptability of TiAlCrN PVD coatings under high performance dry machining conditions , 2005 .

[50]  Mitsuro Hattori,et al.  Development of new-concept desk top size machine tool , 2005 .

[51]  Tae-hyeong Kwon,et al.  Decomposition of factors determining the trend of CO2 emissions from car travel in Great Britain (1970–2000) , 2005 .

[52]  G. Kaupp,et al.  Recycling of EAF dust by semi-continuous high kinetic processing , 2005 .

[53]  Nozomu Mishima,et al.  Microfactory—Concept, History, and Developments , 2004 .

[54]  B. Ang,et al.  A generalized Fisher index approach to energy decomposition analysis , 2004 .

[55]  Jun Qu,et al.  Investigation of the spark cycle on material removal rate in wire electrical discharge machining of advanced materials , 2004 .

[56]  Gale A. Boyd,et al.  A Note on the Fisher Ideal Index Decomposition for Structural Change in Energy Intensity , 2004 .

[57]  Jan Bentzen,et al.  Estimating the rebound effect in US manufacturing energy consumption , 2004 .

[58]  John W. Sutherland,et al.  Dry Machining and Minimum Quantity Lubrication , 2004 .

[59]  M. Gheorghe,et al.  Models of machine tool efficiency and specific consumed energy , 2003 .

[60]  B. W. Ang,et al.  Eight methods for decomposing the aggregate energy-intensity of industry , 2003 .

[61]  J. C. J. M. Bergh,et al.  Comparing structural decomposition analysis and index , 2003 .

[62]  Theocharis Tsoutsos,et al.  Energy saving technologies in the European ceramic sector: a systematic review , 2001 .

[63]  Tony L. Schmitz,et al.  The application of high-speed CNC machining to prototype production , 2001 .

[64]  Hyun-Sik Chung,et al.  A residual-free decomposition of the sources of carbon dioxide emissions: a case of the Korean industries , 2001 .

[65]  R. G. Fenton,et al.  Analysis of Remanufacturer Waste Streams Across Product Sectors , 2001 .

[66]  B. W. Ang,et al.  A survey of index decomposition analysis in energy and environmental studies , 2000 .

[67]  K. Shine.  Radiative Forcing of Climate Change , 2000 .

[68]  Ernst Worrell,et al.  Reduction of CO2 emissions by improved management of material and product use: the case of primary packaging , 2000 .

[69]  W. B. Davis,et al.  Decomposition of aggregate carbon intensity for freight: trends from 10 OECD countries for the period 1971-1993 , 1999 .

[70]  Manocher Djassemi.  A parametric programming technique for efficient CNC machining operations , 1998 .

[71]  J. Sun.  Changes in energy consumption and energy intensity: A complete decomposition model , 1998 .

[72]  Lee Schipper,et al.  ENERGY USE AND CARBON EMISSIONS FROM FREIGHT IN 10 INDUSTRIALIZED COUNTRIES: AN ANALYSIS OF TRENDS FROM 1973 TO 1992 , 1997 .

[73]  Radovan Kovacevic,et al.  High pressure waterjet cooling/lubrication to improve machining efficiency in milling , 1995 .

[74]  Ernst Worrell,et al.  An approach for analysing the potential for material efficiency improvement , 1995 .

[75]  M. J. Hutzler,et al.  Emissions of greenhouse gases in the United States , 1995 .

[76]  L Schipper,et al.  CO2 EMISSIONS FROM PASSENGER TRANSPORT: A COMPARISON OF INTERNATIONAL TRENDS FROM 1973-1990 , 1994 .

[77]  Wtm Wim Wolters,et al.  Sequencing problems in designing energy efficient production systems , 1993 .

[78]  Said Jahanmir,et al.  Ceramic machining: Assessment of current practice and research needs in the United States. Special pub. (Final) , 1992 .

[79]  Steinar Strøm,et al.  Energy use in passenger transport in OECD countries: Changes since 1970 , 1992 .

[80]  K. Ahrens.  AN ENERGY POLICY FOR EUROPE , 1974 .