Solid-State Inrush Current Limiter Controller Based on Inrush Prediction for Large Transformers

Inrush current problems of the industrial transformers are occasionally more serious than the utility transformers. A new Solid-State Inrush Current Limiter (SSICL) is proposed for medium voltage power transformers. The SSICL consists of three similar sets. Each set includes a bidirectional semiconductor switch and an inrush current limiter resistor. Using a control strategy based on Kalman filtering, transformer inrush current is suppressed during magnetization process. In fact, built up profile of the inrush current is dictated in accordance with the estimated current by a slow dynamic Kalman filter. A single-phase prototype SSICL is developed and tested. The proposed control scheme is simulated in MATLAB-SIMULINK. By using Real Time (RT) toolbox of the MATLAB software and a PCI_1711U, interrelationship between the SSICL and its controlling system is realized. Some experiments are carried out to evaluate the performance of the SSICL. The results show that the proposed SSICL can considerably suppress inrush current of the transformer

[1]  Ebrahim Farjah,et al.  Solid-state transient limiter for capacitor bank switching transients , 2013 .

[2]  K. S. Smith,et al.  Analysis of transformer inrush transients in offshore electrical systems , 1999 .

[3]  Shin-Der Chen,et al.  Transformer design with consideration of restrained inrush current , 2006 .

[4]  R. Haghmaram,et al.  Inrush current limiter based on three-phase diode bridge for Y-yg transformers , 2012 .

[5]  Juei-Lung Shyu,et al.  A Novel Control Strategy to Reduce Transformer Inrush Currents by Series Compensator , 2005, 2005 International Conference on Power Electronics and Drives Systems.

[6]  Ebrahim Farjah,et al.  Start‐up circuit for an electric vehicle fast charger using SSICL technique and a slow estimator , 2020, IET Generation, Transmission & Distribution.

[7]  Ebrahim Farjah,et al.  Development of a high-performance bridge-type fault current limiter , 2013 .

[8]  E. Farjah,et al.  Development of an Efficient Solid-State Fault Current Limiter for Microgrid , 2012, IEEE Transactions on Power Delivery.

[9]  K. J. Frohlich,et al.  Elimination of transformer inrush currents by controlled switching. I. Theoretical considerations , 2001 .

[10]  Chih-Kun Cheng,et al.  Asymmetrical winding configuration to reduce inrush current with appropriate short-circuit current in transformer , 2005 .

[11]  O. A. Mahgoub.  Microcontroller-based switch for three-phase transformer inrush current minimization , 1996, V IEEE International Power Electronics Congress Technical Proceedings, CIEP 96.

[12]  Farzad Iraji,et al.  Power sharing strategy for multi-source electrical auxiliary power unit with bi-directional interaction capability , 2020 .

[13]  Ebrahim Farjah,et al.  Efficient resonant-type transformer inrush current limiter , 2012 .

[14]  Ebrahim Farjah,et al.  Thyristor based bridge-type fault current limiter for fault current limiting capability enhancement , 2016 .

[15]  Mehdi Abapour,et al.  DC reactor type transformer inrush current limiter , 2007 .

[16]  K. J. Frohlich,et al.  Elimination of transformer inrush currents by controlled switching. II. Application and performance considerations , 2001 .

[17]  Wilsun Xu,et al.  A Sequential Phase Energization Method for Transformer Inrush Current Reduction—Transient Performance and Practical Considerations , 2007, IEEE Transactions on Power Delivery.

[18]  J.F. Brudny,et al.  Reduction Of Inrush Current In Single-phase Transformer Using Virtual Air Gap Technique , 1998, 7th Joint MMM-Intermag Conference. Abstracts (Cat. No.98CH36275).

[19]  Chih-Kun Cheng,et al.  Novel approach to reducing the inrush current of a power transformer , 2004 .