Optimization of flow control devices in a single-strand slab continuous casting tundish

The optimization of flow control devices in a single-slab continuous casting tundish was carried out by physical modeling, and the optimized scheme was presented. With the optimal tundish configuration, the minimum residence time of liquid steel was increased by 1.4 times, the peak concentration time was increased by 97%, and the dead volume fraction was decreased by 72%. A mathematical model for molten steel in the tundish was established by using the fluid dynamics package Fluent. The velocity field, concentration field, and the residence time distribution (RTD) curves of molten steel flow before and after optimization were obtained. Experimental results showed that the reasonable configuration with flow control devices can improve the fluid flow characteristics in the tundish. The results of industrial application show that the nonmetallic inclusion area ratio in casting slabs is decreased by 32% with the optimal tundish configuration.

[1]  A. K. Sinha,et al.  Mathematical Modeling of Inclusion Transport and Removal in Continuous Casting Tundishes , 1993 .

[2]  Li-Feng Zhang.  Validation of the Numerical Simulation of Fluid Flow in the Continuous Casting Tundish , 2005 .

[3]  Z. Zou,et al.  Numerical and Physical Simulation of Flow Patterns in a Swirling Flow Tundish , 2005 .

[4]  K M Godiwalla,et al.  Fluid flow behaviour in a water model tundish under open, submerged and modified inlet conditions , 2001 .

[5]  Roderick I. L. Guthrie,et al.  The Physical and Mathematical Modelling of Continuous Casting Tundish Systems , 1999 .

[6]  CaijunZhang,et al.  Influence of flow control devices on metallurgical effects in a large—capacity tundish , 2002 .

[7]  Yuanqing Chen,et al.  Mathematical modeling of fluid flow, heat transfer and inclusion transport in a four strand tundish , 2007 .

[8]  ShihengPeng,et al.  Application of Computational Fluid Dynamics to analysis of metallurgical process for continuous casting tundishes , 2004 .

[9]  YanpingBao,et al.  Design optimization of flow control device for multi－strand tundish , 2003 .

[10]  Zhu Miaoyong.  Optimization of flow control devices in a slab continuous casting tundish , 2007 .

[11]  YanpingBao,et al.  Fluid Flow in Tundish Due to Different Type Arrangement of Weir and Dam , 2002 .

[12]  Jin-gang Liu,et al.  Water Modeling of Optimizing Tundish Flow Field , 2007 .

[13]  Jianhua Liu,et al.  Orthogonal analysis of water model study on the optimization of flow control devices in a six-strand tundish , 2007 .